Safety in Building Construction and Construction Site

Topics: Building, Construction, Architect Pages: 2 (555 words) Published: September 9, 2008
“Safety in Building Construction and Construction Site”
by Ke Geok Chuan, Director, Policy and Research Division, DOSH Malaysia
There are two (2) acts in Malaysia that govern the building construction activities, that is The Factories and Machinery Act 1967 and The Occupational Safety and Health Act 1994. However, the Department of Occupational Safety and Health (DOSH) which is under the Ministry of Human Resources is the lead authority in the enforcement of such law. The law that DOSH enforces cover building operations and works of engineering construction. After works have commenced, a notice of commencement in the form of a JKJ form that can be obtained from DOSH regional offices has to be submitted to the official inspector not later than seven (7) days from the commencement of works. For the usage of such certificated machinery for example tower cranes, material or passenger hoist, pressure vessel or steam boiler has to be first applied for through the submission of the JKJ 105 form. Without the certificate of fitness issued either by DOSH or the Factories and Machinery Act 1967, works cannot proceed. Furthermore, these machineries must also be installed, erected, maintained and dismantled by competent people and a registered crane operator with DOSH also has to be employed. In cases where a concrete batching plant is required, then form JKJ 105 has to be submitted. These permissions have to be submitted and approved first before such plants can be used. Temporary structures such as ramp, wastes disposal chutes and formworks have to be designed and endorsed by a professional engineer beforehand. The main contractor or his representative has to ensure that such document can be available upon request by the inspector. If the is forty (40) or more workers employed, then a committee for safety and health has to be formed at the construction site. The safety and health committee has to be...
Continue Reading

Please join StudyMode to read the full document

You May Also Find These Documents Helpful

  • Essay on Construction and Safety

    ... P 1.1 Discussing the use of approved codes of practice to ensure compliance with health and safety legislation. PAGE 2 P 1.2 Explaining the responsibilities for providing welfare facilities on-site. PAGE 4 P 1.3 Explaining the Construction (Design and Management) Regulations 2007. Evaluate the penalties for non-compliance with current health and safety at work legislation. Give at least two examples for easy understanding. PAGE 7 P 2.1 Analyse organizational health and safety policies and procedural documents. PAGE 10 P 2.2 Determine training needs from given risk assessments, including on-site induction training and relevant sector certification. Give at least one example to illustrate training needs. PAGE 13 1. Discussing the use of approved codes of practice to ensure compliance with health and safety legislation. (P1.1) The Approved Codes of Practice (ACOP) is a practical guide to achieving the standards of health, safety and welfare required. A code of practice applies to anyone who has a duty of care in the circumstances described in the code. In most cases, following an approved code of practice would achieve compliance with the health and safety duties , in relation to the subject matter of the code. Like regulations, codes of practice deal with particular issues and do not cover all hazards or risks...

    Read More
    4901 Words 19 Pages
  • Safety on Construction Sites Essay

    ...professionals and site manager in enabling and maintaining a safe working environment on a construction project. Construction sites are dangerous places. Statistics show that, on average, a person is killed every four days and hundreds are injured. Members such as clients, architects, design professionals and site managers on construction sites; they have to produce risk assessments that identify potential hazards and method statements that set out how jobs are to be done properly and safely. Client: A client is a group or individual who is having construction project or building work carried out, unless they are a domestic client. A domestic client is someone who lives, will live, or use the construction for any purposes such as commercial. Clients have big influences on construction sites safety for few reasons such as the funds, the period of time the client has given and other resources provided by the client, moreover, the client manages the project team and decides who does what and the plan for their work. Clients must take measures before a construction starts for example ensure that the projects team works effectively together, suitable managements and method statements for the project, provide enough time and funds, furthermore, provide information....

    Read More
    1150 Words 4 Pages
  • Construction Safety

    ... Construction sites are dangerous, and many accidents can occur. Each day on a work site, construction workers are subject to many tasks and pieces of equipment that can put their lives in danger. Workers are asked to work with heavy equipment and powered vehicles, such as forklifts (Powered vehicles), cranes and other heavy duty equipment, (OSHA, 2010). With all of the activities that occur on a construction site, accidents due to falls are the number one threat to construction workers on a work site, (OSHA, 2010). The U.S. Occupational Safety & Health Administration (OSHA) states that falls are the number one cause of construction injuries and deaths, (OSHA, 2010). Falls are the leading cause of deaths in the construction workplace. From 1995 to 1999 with an average of 362 fatal falls occurred; this trend is on the rise, (OSHA, 2010). OSHA states that it is important that safety and health programs have steps or measures to protect construction workers from falls on sites. Most fall-related injuries occur from unprotected side walls, wall openings, floor holes, not using scaffolding correctly, unguarded protruding rebar and not using ladders correctly, (OSHA, 2010). Falls from a height or from an elevation will count towards one third of all deaths in...

    Read More
    1241 Words 6 Pages
  • Safety on a construction site Essay

    ...the forces and physics involved, these are usually not first-aid injuries; there is often an ambulance and sometimes a coroner called to the jobsite. Road Construction Safety[edit] The United States has over 4 trillion miles of road, over 65% of which is paved. The American Recovery and Reinvestment Act of 2009 created over 12,600 road construction projects, over 10,000 of which are currently in progress.[12] Workers in highway work zones are exposed to a variety of hazards and face risk of injury and death from construction equipment as well as passing motor vehicles. Workers on foot are exposed to passing traffic, often at high speeds, while workers who operate construction vehicles are at risk of injury due to overturn, collision, or being caught in running equipment. Regardless of the task assigned, all construction workers work in conditions of poor lighting, poor visibility, inclement weather, congested work areas, high volume traffic and speeds.[13] In 2011, there were a total of 119 fatal occupation fatalities in road construction sites. In 2010 there were 37,476 injuries in work zones, about 20,000 of those injuries are construction workers.[14] Because they are so complicated, slight lapses in safety or awareness that might lead to mild accidents in other construction sites can be deadly for...

    Read More
    1137 Words 4 Pages
  • Essay on Building Construction

    ...(4) Building construction is a complex, significant, and rewarding process. It begins with an idea and culminates in a structure that may serve its occupants for several decades, even centuries. Like the manufacturing of products, building construction requires an ordered and planned assembly of materials. It is, however, far more complicated than product manufacturing. Buildings are assembled outdoors on all types of sites and are subject to all kinds of weather. Additionally, even a modest-sized building must satisfy many performance criteria and legal constraints, requires an immense variety of materials, and involves a large network of design and production firms. It is further complicated by the fact that no two buildings are truly identical; each one must be custom-built to serve a unique function and respond to the uniqueness of its context and the preferences of its owner, user, and occupant. Because of a building’s uniqueness, we invoke first principles in each building project. Although it may seem that we are “reinventing the wheel,” we are in fact refining and improving the building delivery process. In so doing, we bring to the task the collective wisdom of the architects, engineers, and contractors who have done so before us. Although there are movements that promote the development of standardized,...

    Read More
    11388 Words 47 Pages
  • Essay about Safety in Construction

    ...BLDG1260 Construction Management Principles LECTURE 3: SAFETY IN CONSTRUCTION Riza Yosia Sunindijo Outline and aims 1 2 3 4 5 6 7 The basic of construction safety The importance of safety The evolution of construction safety Psychological aspect Behavioural aspect Situational aspect Investing in safety 1 Basic definitions What is safety? What is a hazard? What is a risk? Accident vs. incident vs. injury What are the causes of an accident? Anton, T.J. (1989). Occupational safety and health management, 2nd ed. McGraw-Hill. Holt, A. S. J. (2005). Principles of construction safety. Blackwell Science. Causes of accidents Safety is always a management issue because managers decide on: • Safety budget • Resource allocation • Planning • The implementation of safety management system • Safety control • Creating safety culture in the organisation 2 Why safety in construction? • 7% of the world’s employment. • 30-40% of the world’s fatal injuries. Dirty Difficult • At least 60,000 fatalities per year. • Due to bad and illegal work conditions. • Falls from heights, buried in un-shored excavations, crushed by vehicles and plant. Dangerous • All causes are...

    Read More
    1142 Words 7 Pages
  • Essay about construction

    ... SCHOOL OF ENGINEERING CONSTRUCTION ECONOMICS BUSINESS CASE ASSIGNMENT 1 Name: Dharavath Gautham Naik (Student ID: 1314288) LECTURER: JAMES ROTIMI FACULTY OF DESIGN AND CREATIVE TECHNOLOGIES AUCKLAND UNIVERSITY OF TECHNOLOGY TE WANANGA ARONUI O TAMAKI MAKAU RAU School of Engineering PROJECT MANAGEMENT IN CONSTRUCTION. Name Dharavath Gautham Naik ID Number 1314288 Paper Name CONSTRUCTION ECONOMICS. Assignment BUSINESS CASE Number of words (excluding appendices) Please read and tick the boxes below before handing in your assignment If you are uncertain about any of these matters then please discuss them with your lecturer. Assignments will not be accepted if this section not completed. Where I have used someone else’s words or images, we have clearly indicated this by putting them inside speech marks (if appropriate) and adding an in-text reference Where I have used other people’s ideas or writing, we have clearly indicated this by putting them into our own words and adding and adding the reference at the end of the sentence/paragraph. □  Other than the above, this assignment IS NOT copied from another student or previous assignment □  IS NOT directly copied from books, journals or other materials □  IS NOT cut and pasted from the internet □  HAS NOT been handed in by one of us or anyone else in any other course □  HAS NOT been done by someone else (e.g. friends,...

    Read More
    3152 Words 12 Pages
  • Health and Safety in Construction Essay

    ...Task 1 - Roles and Responsibilities 1. The people who are responsible for health and safety on a project: a) Site Manager b) Assistant Site Manager The assistant site manger role will be keeping records associated with safety e.g. statutory inspections, including records required by CDM for hazard management e.g. sub-contractors method statements etc and anything else required by statue or included in the Construction Phase Plan and by the relevant procedures in the contractors Manual of Quality, Safety and the Environment. In addition to this the assistant site manager would be consistent with what the employer and site manager wishes it to be and which would be dependent or limited to the level of the assistant site managers competence especially in relation to the health and safety issues. c) CDM Co-ordinator The main duties of CDM co-ordinators are to advise and assist the client in meeting their duties as a client under the Regulations, in particular the duty to: • • appoint competent designers and contractors make sure adequate arrangements are in place for managing the project notify HSE about the project co-ordinate design work, planning and other preparation for construction, where relevant to health and safety identify and collect the pre-construction information and...

    Read More
    1270 Words 5 Pages

Popular Essays

Become a StudyMode Member

Sign Up - It's Free