Determination of the Enthalpy for Decomposition of Hydrogen Peroxide Objective: To construct a coffee cup calorimeter‚ measure its calorimeter constant‚ and determine the enthalpy of decomposition and formation of hydrogen peroxide. Background: This experiment is a classic thermodynamics lab. In it‚ we attempt to measure the enthalpy (H) of a chemical reaction. The main obstacle is that this is a quantity that cannot be measured directly. It instead is observed as heat from one substance is transferred
Free Thermodynamics Energy Hydrogen peroxide
investigation to show how the rate of reaction between hydrochloric acid and sodium thiosulphate is affected by the concentration of the acid Simple Procedure Place a conical flask on a piece of paper with a cross on it. Add hydrochloric acid and sodium thiosulphate‚ and record the amount of time taken for the cross to disappear through the solution from the top of the flask. Record this time and repeat this for different concentrations of hydrochloric acid. Fair Test The variables in this
Premium Chemical reaction Chemistry Concentration
Acid Determination of Vitamin C Tablets and Salt Solutions Chem 1290-016 03-05-2010 ------------------------------------------------- Purpose: The purpose of this lab was to use acid-base titrations to find the mass percent of ascorbic acid in a Vitamin C tablet. A known concentration of sodium hydroxide was used and the value found was compared to the stated amount of ascorbic acid listed on the vitamin container. Also in this lab the acidity of different salt solutions were tested using
Premium PH indicator Base Acid
molar enthalpy change of a neutralization reaction Principle H2SO4(aq)+2NaOH(aq)=Na2SO4(aq)+2H2O(l) The reaction is a exothermic reaction‚ when the heat released by it is absorbed by water‚ the temperature of the water increases. The heat produced by the reaction can be calculated if it is assumed that all the heat is absorbed by the water. Heat change of reaction=-heat change of water =-mH2O×cH2O×△TH2O As the water has gained the heat produced by the reaction‚ the heat change of reaction is negative
Free Thermodynamics Temperature Sodium hydroxide
1.0 M sodium hydroxide by pipette‚ diluting with approximately the same volume of distilled water. Warm the flask over a tripod and gauze for ten minutes to complete the hydrolysis. b. Cool the reaction mixture and transfer with washings to a 250 cm3 volumetric flask‚ dilute to the mark with distilled water and then ensure that the contents of the flask are well mixed by repeated shakings. c. Titrate 25 cm3 portions of the diluted reaction mixture with the standard 0.050 M sulphuric acid provided
Premium Sodium hydroxide PH indicator Titration
Determination of Vitamin C (Ascorbic acid) concentration in some of Commercial Products‚ by Redox Titration Mouhannad AL.-Hachamii Sadiq J. Baqir Saadon A.Aowda Fatima A. Hussein‚ Dep.of chemistry‚ college of science‚ Babylon University Muhammed K.Alasedi Ministry of Health Hilla city‚ Babylon Abstract The goal of this search is to determine the concentration of vitamin C (Ascorbic acid ) in some of a Commercial Products‚ Vegetables and Fruit Juices by Redox Titration. A redox
Premium Vitamin C
Enthalpy of Displacement IB Topic: Energetics Assessment Criteria: DCP‚ CE DATA COLLECTION AND PROCESSING ASPECT MARKS AWARDED Recording raw data: Processing raw data: Presenting Proceeded data: TOTAL: CONCLUSION AND EVALUATION Conclusion Evaluation Improving the procedure TOTAL AIM: Experimentally determine the enthalpy change of the displacement reaction between zinc and copper sulphate. Zn (s) + CuSO4 (aq) Cu (s) + ZnSO4
Premium Thermodynamics Sulfuric acid Copper
However‚ for Quick-eze‚ the number of moles is 0.00216 moles (1 tablet). This means the average volume of the NaOH have affected the number of moles as the concentration of the sodium hydroxide is 0.1M. This means that if less NaOH was required to neutralise the acid‚ the number of moles of HCl neutralized by the ant-acid would be greater. For example; by using mole ratio‚ the number of moles of HCl reacted with the NaOH is 0.00216 moles (1 tablet of Quick-eze). The number of moles of HCl that were
Premium Acid Chemistry Water
Experiment 5 In the first part of this lab‚ the objective was to get the molar concentration of sodium hydroxide by using the secondary standard‚ sodium hydroxide solution with the primary standard‚ potassium hydrogen phthalate. With this information‚ we could create a second derivative plot‚ which can be used to obtain the exact concentration of the secondary standard‚ sodium hydroxide. Also‚ the indicator can give us these results along with the end points and with the readings from the pH meter;
Premium Sodium hydroxide
Concentrations of HCl on the Rate of Reaction Between HCl and Sodium Thiosulfate Chemistry Lab report Aim: The aim of this experiment is to determine how concentrations of HCl acid affect the rate of reaction when reacted with Sodium Thiosulfate (Na2S2O3). This experiment would require measuring the mass of the reaction over a period of time to be able to determine the rate of the reaction. Safety Precautions: In this experiment‚ SO2 gas is produced from the reaction between Sodium Thiosulfate and HCl‚ and
Premium Chemical reaction Chemistry