Vapor Pressure and Enthalpy of Vaporization of Water 1/9/12 Emily Toy Lab Partner: Zack Ronnei Instructor: Ms. Olsen‚ AP Chemistry Purpose: The purpose of this lab is to find the vapor pressure of water at temperatures between 50oC and 80oC. Procedure: 1. Take a10 mL graduated cylinder and fill it with 7 mL of water. 2. Next fill a 1000 mL beaker ¾ full with water. 3. Cover the graduated cylinder by putting your finger on top and place the cylinder in the 1000 mL beaker. Make
Premium Thermodynamics Pressure Vapor pressure
Abstract: Enthalpy of vaporization of ethanol was determined by measuring change in temperature and pressure of ethanol using a Vernier temperature probe. By using the ideal gas equation‚ and plugging the slope value from the graph into the Clausius-Claypernon equation‚ enthalpy of vaporization was determined to be 10kJ/mol. The percent error was determined to be 76.0%. Introduction: The purpose of this lab is to investigate vapor pressures and the partial pressure of gas produced from liquids
Premium Ideal gas law Gas Pressure
SCB 12204 THERMAL SCIENCE LAB REPORT EXPERIMENT 5 Objective: To study the relationship between pressure and temperature of vaporization of water. Apparatus: 1. Stopwatch Picture 1 : stopwatch 2. Vapor pressure machine Picture 2: Vapor pressure machine Procedures: Picture 3 :general start up and shut down procedure 1. The general start up was followed. (picture 3) 2. Make sure the entire valves were closed. 3. After that main switch
Premium Vapor pressure Gas Pressure
Vapor Pressure and Heat of Vaporization Introduction: Evaporation is the process of a liquid becoming vaporized. When a liquid is placed into a confined space some of the liquids will evaporate. Evaporation of the liquid depends on the strength of the intermolecular forces that are between liquid molecules. During the evaporation process of the liquid‚ new gas molecules exerts pressure in the sealed container‚ while some of the gas condenses back to the liquid state. If the temperature inside
Premium Gas Evaporation Water
LAB OF ENTHALPY CHANGE IN COMBUSTION Objective: Determine the Enthalpy change of combustion ΔHc of three different alcohols. Methanol‚ Ethanol and Isopropilic acid. Procedure: 1. Fill the spirit micro burner with Ethanol and weight it 2. Pour 100 cm3 of water into the aluminum cup 3. Arrange the cup a short distance over the micro burner 4. Measure the temperature of water 5. When the temperature of the water has risen by 10°C‚ record the temperature. 6. Reweight
Premium Oxygen Ethanol Carbon dioxide
The vapor pressure of a liquid is the equilibrium pressure of gas molecules from that liquid (i.e.‚ the results of evaporation) above the liquid itself. A glass of water placed in an open room will evaporate completely (and thus never reach equilibrium); however‚ if a cover is placed on the glass‚ the space above the liquid will eventually contain a constant amount of water vapor. How much water vapor is present depends on the temperature‚ but not on the amount of liquid that is present at equilibrium
Premium Water Evaporation Liquid
Abstract This lab is performed in order to determine the total energy in a reaction between zinc and hydrochloric acid. The reaction is done twice‚ once to measure the heat of the reaction and again to determine the work done in the system. This is because Enthalpy equals heat plus work (∆H= ∆E+W). Heat and work can be broken down further into separate components so the equation used in lab is ∆H=mc∆T + PV. Many calculations are used in the lab to find out what cannot be measured directly (ex:
Premium Thermodynamics Energy Temperature
Enthalpy‚ represented by the sign ∆H in kJ/mol‚ is the heat change in a reaction. It shows whether how much heat is released or absorbed during the reaction. If the reaction is endothermic‚ the enthalpy would be positive and if the reaction is exothermic‚ the enthalpy would be negative. During a chemical reaction‚ which consists of breaking and creating bonds‚ heat is either absorbed or released. In this lab‚ the reaction uses the disassociation of an ionic compound ammonium nitrate shown in the
Premium Entropy Thermodynamics Temperature
Experiment :12 Vapor Pressure and the Heat of Vaporization Nicole Petersen TA: Ryan Dixon 4/16/2013 Purpose: Use experimental techniques to record temperature and volume data for known and unknown compounds. The liquid and gas are going to be at equilibrium. We will also determine the boiling point for the known and unknown. Then use a graph to calculate the slope and then use Clasius- Clapeyron equation to find the heat vaporization. Procedure: Refer to pages 155-167 of Chemistry 1210 General
Premium Gas Temperature Water
Name Lab Partner Name(s) Thermodynamics‚ Enthalpy of Reaction Lab March 27‚ 2014 I. Purpose The purpose of this lab is to learn how to determine the heat of reaction. II. Safety 1. Wear appropriate safety attire (goggles‚ aprons‚ hair tie‚ etc.). 2. Do not directly inhale or ingest chemicals. 3. Understand safety information regarding the chemicals being handled during the lab (hydrochloric acid‚ sodium hydroxide). 4. Be aware of how to operate all lab equipment. 5. Clean hands
Premium Enthalpy Energy