Introduction The purpose of this lab was to test different antacids‚ to find out which would be the most effective to take. Stomach acid problems come from a overproduction‚ and build up of gastric acid (HCl). In order to determine which antacid is the more effective‚ four different brands of antacids were chosen‚ and tested. The purpose of an antacid is to balance out the pH inside a person’s stomach. PH is the measurement of molar concentration of hydrogen ions that are present in the solution
Premium Chemistry Chemical reaction Water
| Preparation and standardization of 0.1 M NaOH using KHP | Analysis of unknown solid containing KHP | | Steanie Rodriguez | 6/7/2011 | CHEM-C311 Analytical Chemistry Laboratory July 7‚ 2011 The main purpose of this experiment is to identify an unknown organic acid by conducting various experiments to determine the acid’s unique properties. By determining selected constant properties of the unknown and then comparing these properties to the constant properties of known substances
Premium Titration Standard deviation PH indicator
HCL Technologies Case Study In this Assessment I will use the HCL case study to analyze the trends and economic forces that impact innovation and change in the global markets of HCL Technologies. Analyze the ways that Nayar applied theory to change organizational structure‚ culture‚ and processes to support and sustain innovation in light of the changing global markets. Lastly‚ I will Analyze Nayar’s leadership in relation to the effectiveness of general management planning and decision making
Premium
Acid Base Titration Purpose: The purpose is to calculate the molarity of a NaOH solution by titrating the base with 5mL of standard HCl solution in each trial. By adding the base with unknown molarity to the acid with 0.10M the molarity of NaOH can be calculated. The base‚ NaOH‚ helps bring the pH of the acid‚ HCl‚ closer to seven‚ which neutralizes it. When using the buret the amount of NaOH used is able to be determined. Then by writing a balanced chemical equation and using the titration
Premium Titration Sodium hydroxide Acid
pH and Chromatography Lab Report Kevin Rivera Biology Mr. Langley 2C 10/7/13 Introduction In this lab‚ of pH and Chromatography‚ in the pH aspect of the lab we are trying to figure out the pH level of certain chemicals by writing down of known solutions to find the type of unkown solution using pH standards. In the Chromatography‚ we are trying to separate the chemicals using water and a piece of paper. Methodology Materials: Safety Goggles pH indicator & pH indicator key
Free Acid Base Chemistry
Irresistible? By Elizabeth Potter December 5‚ 2012 Lab Section 503 Abstract The over all goal of the Irresistible lab was to verify a buffer’s ability to resist changes in pH with consecutive 1mL additions of either a strong acid (HCl) or base (NaOH). The experiment entailed preparing a combination 10 buffered and non-buffered solutions and then monitoring the pH changes as a strong acid or base was added to the solution. By performing this experiment‚ it was found that with increasing amounts
Premium Chemistry Acid dissociation constant Acid
reaction between an acid and a base is also known as neutralization‚ and is usually an exothermic reaction. When reactants are combined at stoichiometric ratios the reaction is able to be completed and would exert the most heat energy. The purpose of this lab was to carry out the reaction between a basic solution of Sodium Hydroxide with Hydrochloric acid‚ and also the reaction of Sodium Hydroxide with Sulfuric Acid to
Premium Chemical reaction Sodium hydroxide
Feb. 19‚ 2015 Liangting Lin 1-4 Lab Partner: Sunny Zhao 20C: Acid-Base Titration Purpose/Objective: 1. To titrate a hydrochloric acid solution of unknown concentration with 0.50M sodium hydroxide‚ and determine the molarity of the hydrochloric acid 2. To titrate an acetic acid solution with 0.50M sodium hydroxide‚ and determine the molarity and percentage composition of the vinegar. Apparatus
Premium Chlorine Acetic acid Sodium chloride
CJ Tavner 2/04/2013 Chemistry Lab: Equilibrium and LeChatelier’s Princinple Objective: Put stresses on the systems; observe how the equilibrium’s systems react to a stress. Materials and Procedures: A. Materials 1. NaCl(s) 2. KSCN‚ 0.002M 3. Bromythymol blue indicator solution 4. AgNO3‚ 0.1 5. CoCL2 x 6H2O(s) 6. HCl‚ 12M 7. HCL‚ 0.1M 8. NaOH‚ 0.1M 9. Fe(NO3)3‚ 0.2M 10. C2H5OH(l) 11. Na2HPO4(s) 12.
Free Hydrochloric acid Sodium chloride Hydrogen
The Mass of Acetylsalicylic Acid in Aspirin ------------------------------------------------- Purpose The purpose of the lab is to determine the mass of the ‘active ingredient’ in a commercial ASA tablet. ------------------------------------------------- ------------------------------------------------- Introduction There are three main theories surrounding acids and bases including the Arrhenius‚ Bronsted-Lowry‚ and Lewis theories. The Arrhenius theory of acids and bases states that
Premium Acid PH Sodium hydroxide