A&P Airframe Oral Exam
Airframe O&P (partial)
Study online at quizlet.com/_7liry
1.
An owner desires to use a progressive inspection program. To whom does the owner apply for authorization? At what time would a check of a landing gear warning system normally be made? In what significant way is a vapor-cycle cooling system different from an air-cycle system? What 2 types of organic fibers are used for covering aircraft? What action must be taken when an oxygen system has been open to the atmosphere? What could cause an AC electric motor to run too slowly? What device provides the principle means of controlling cabin pressure? What is the function of zincchromate or wash primers?
To the FAA FSDO having jurisdictions over the area where the owner is located During a landing gear retraction test Vapor-cycle systems use a refrigerant liquid, usually Freon. Cotton & Linen the system must be purged of any moisture.
14.
What is the name of the unit that prevents a nose wheel from vibrating or oscillating? What is the power source for an ELT? What is the preferred method for welding aluminum? What is the preferred method for welding magnesium? What is the principal advantage of the enveloope method for covering wings? What is the proper length for a bonding jumper? What is the proper thinner to use with zincchromate primer? What is the purpose of a bonding jumper from a radio shock mount to the airframe? What is the purpose of a debooster?
A shimmy damper
15.
An internal battery Tungsten Inert Gas (TIG)
2.
16.
3.
17.
Tungsten Inert Gas (TIG)
4.
18.
5.
Almost all the seams are machine-sewed by the envelope supplier As short as possible, but long enough to allow free movement of the component Toluene
19.
6.
Lack of lubrication, defective wiring, or low applied voltage The outflow valve.
20.
7.
21.
8.
Primers serve to inhibit corrosion and provide a good band between the metal and the topcoats. Reinforcing tape is used between
Study online at quizlet.com/_7liry
1.
An owner desires to use a progressive inspection program. To whom does the owner apply for authorization? At what time would a check of a landing gear warning system normally be made? In what significant way is a vapor-cycle cooling system different from an air-cycle system? What 2 types of organic fibers are used for covering aircraft? What action must be taken when an oxygen system has been open to the atmosphere? What could cause an AC electric motor to run too slowly? What device provides the principle means of controlling cabin pressure? What is the function of zincchromate or wash primers?
To the FAA FSDO having jurisdictions over the area where the owner is located During a landing gear retraction test Vapor-cycle systems use a refrigerant liquid, usually Freon. Cotton & Linen the system must be purged of any moisture.
14.
What is the name of the unit that prevents a nose wheel from vibrating or oscillating? What is the power source for an ELT? What is the preferred method for welding aluminum? What is the preferred method for welding magnesium? What is the principal advantage of the enveloope method for covering wings? What is the proper length for a bonding jumper? What is the proper thinner to use with zincchromate primer? What is the purpose of a bonding jumper from a radio shock mount to the airframe? What is the purpose of a debooster?
A shimmy damper
15.
An internal battery Tungsten Inert Gas (TIG)
2.
16.
3.
17.
Tungsten Inert Gas (TIG)
4.
18.
5.
Almost all the seams are machine-sewed by the envelope supplier As short as possible, but long enough to allow free movement of the component Toluene
19.
6.
Lack of lubrication, defective wiring, or low applied voltage The outflow valve.
20.
7.
21.
8.
Primers serve to inhibit corrosion and provide a good band between the metal and the topcoats. Reinforcing tape is used between