Route Instructor Lab Manual

Only available on StudyMode
  • Download(s) : 330
  • Published : April 15, 2013
Open Document
Text Preview
CCNP ROUTE 6.0
Instructor Lab Manual

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNP TSHOOT course as part of an official Cisco Networking Academy Program.

CCNPv6 ROUTE

Chapter 1 Lab 1-1, Tcl Script Reference and Demonstration Instructor Version Topology

Objectives
• • Use Tcl scripts to verify full connectivity. Identify causes of failures.

Background
The Cisco IOS Scripting feature provides the ability to run Tool Command Language (Tcl) commands from the Cisco IOS command-line interface (CLI). Tcl scripts can be created to accomplish routine and repetitive functions with Cisco IOS-based networking devices. In this lab, you create and execute a Tcl script that sends pings to multiple IP addresses in the network to test overall network connectivity. Note: Cisco IOS Release 12.3(2)T and later supports Tcl scripting.

Required Resources
• • 2 routers (Cisco 1841 with Cisco IOS Release 12.4(24)T1 Advanced IP Service or comparable) Serial and console cables

Note: This lab uses Cisco 1841 routers with Cisco IOS Release 12.4(24)T1 and the advanced IP image c1841-advipservicesk9-mz.124-24.T1.bin. Other routers (such as a 2801 or 2811) and Cisco IOS Software versions can be used if they have comparable capabilities and features. Depending on the router model and Cisco IOS Software version, the commands available and output produced might vary from what is shown in this lab.

All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 12

CCNPv6 ROUTE

Step 1: Configure initial settings.
Copy and paste the following initial configurations for R1 and R2. Router R1 hostname R1 ! interface loopback 1 ip address 10.1.1.1 255.255.255.252 ! interface loopback 2 ip address 10.1.2.1 255.255.255.252 ! interface loopback 3 ip address 10.1.3.1 255.255.255.252 ! interface loopback 4 ip address 10.1.4.1 255.255.255.252 ! interface serial 0/0/0 ip address 10.100.12.1 255.255.255.252 clock rate 64000 bandwidth 64 no shutdown ! router rip version 2 network 10.0.0.0 no auto-summary ! end Note: A 30-bit subnet mask (255.255.255.252) is used for the serial links in this lab. However, starting with IOS 12.2(4)T, the 31-bit subnet mask (255.255.255.254) is supported on IPv4 point-to-point interfaces (per RFC 3021), requiring only 2 IP addresses per point-to-point link (.0 and .1). The IP Unnumbered feature can also be used to conserve IP addresses.

Router R2 hostname R2 ! interface loopback 1 ip address 10.2.1.1 255.255.255.252 ! interface loopback 2 ip address 10.2.2.1 255.255.255.252 ! interface loopback 3 ip address 10.2.3.1 255.255.255.252 ! interface loopback 4 ip address 10.2.4.1 255.255.255.252 ! interface serial 0/0/0 bandwidth 64

All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 2 of 12

CCNPv6 ROUTE no shutdown ! router rip version 2 network 10.0.0.0 no auto-summary ! end Do you think that these configurations will achieve full connectivity between R1 and R2? Explain. __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ None of the pings across the serial link will succeed because the serial 0/0/0 interface on R2 does not have an IP address. R1 will not be able to ping any addresses on R2, and R2 will not be able to ping any addresses on R1. R1 is also unable to ping its...
tracking img