Abstract. This report is about how to standardize a Sodium Hydroxide (NaOH) solution by titrating it with pure sample of Potassium acid Phthalate (KHC8H4O4). This experiment has two sections. The first section is to standardize the Sodium Hydroxide by titration. Three sample of 0.7 – 0.9 g of solid KHP are place into each of the three numbered Erlenmeyer flasks. 50 ml of distilled water are added to each three of it from graduated cylinder and constantly shake it until the KHP solution are completely
Premium Sodium hydroxide Titration
labs. For this particular lab we will utilize our scientific knowledge of related to gravimetric procedures to find the chloride content in an unknown soluble salt. Theory: Using our developed knowledge of the conservation of mass‚ solubility and precipitation it is possible (with some degree of error) to know the content of chlorine in a particular salt by dissolving it in water‚ than extracting it through precipitation. This method is based on quantitative isolation of pure chlorine on both sides
Premium Chemistry Water Solution
gas phase and liquid phase. In industries‚ many companies have high demand on both quality and quantity of water for production. Membrane process can be used to separate chemical substances in various types and sizes from microscopic to molecular level. The objective of this experiment is to study the characteristic of four different types of membrane. The membranes used in this experiment are polyamide film ( AFC 99 ) as membrane one ‚ polyamide film ( AFC 40 ) as membrane two ‚ cellulose acetate
Premium Ultrafiltration Separation process Chemical engineering
Abstract An experiment is conducted to prepare soap and thus‚ to compare the properties of the prepared soap and synthetic detergents which are precipitation‚ emulsification and cleaning abilities. It can be concluded that soap has the properties if emulsifying oil whereas detergent has not. The abilities of forming precipitates can be seen clearly in soap solution whereas detergent forms no precipitates at all. The experiment is completed and successfully conducted. Introduction
Premium Water Soap Sodium hydroxide
1700 340 -120.6 Boiling Point (C) 657 3600 2977 2230 360 2.2 State at STP Solid Solid Solid Solid Solid Liquid Action of water Dissolve in water and form alkaline solution Slightly dissolve in water and form alkaline solution Insoluble in water Insoluble in water Dissolve in water and form acidic solution Dissolve in water and form acidic solution pH of aqueous solution 14 9 7 7 1 3 Acid-base nature Basic Basic Amphoteric Acidic Acidic Acidic Conductivity
Premium Ionic bond Oxygen Oxide
Investigating the Ratio Between Poly-Vinyl Alcohol and Sodium Borate to form a Bouncing Ball Timothy English Gen. Chem. 1 Lab Section: 009 Introduction: Poly-Vinyl Alcohol (PVA) is a water-soluble synthetic polymer that will be used as one element to form the well know bouncing ball‚ along with Sodium Borate (borax)‚ which has a variety of uses because of its weak base. PVA is ideal for this experiment because it is odorless‚ nontoxic‚ has high tensile strength and flexibility. The
Premium Plastic Polymer Silver
Title: Reaction of Iodoethane with Sodium Saccharin- Ambient Nucleophile Dates Performed: February 21 + 28‚ 2013 Date Submitted: March 14‚ 2013 Abstract: The product ratio of N-ethylsaccharin to O-ethylsaccharin that occurred due to alkylation with iodoethane at 80 oC was determined to be 81.5% to 18.5%‚ respectively‚ based on an analysis of the 1H NMR spectrum that was collected. The melting point range of 87.8-94.7 oC also indicated that the mixture was largely composed of N-ethylsaccharin
Premium Nucleophile
remains frozen. When the temperature reaches 0°C (the melting point of water)‚ the ice begins to melt. Because melting is an endothermic process‚ the heat we add at 0°C is used to convert ice to water and the temperature remains constant until all the ice has melted. Once we reach this point‚ any further addition of heat causes the temperature of the liquid water to increase. You observed a phase change process for ice (solid water) being melted‚ heated and then boiled in class. A graph of the temperature
Premium Thermodynamics Water Heat
Sodium hypochlorite‚ also known as chlorine bleach‚ soda bleach‚ or household bleach is a chemical with the formula NaClO. A common way sodium hypochlorite gets into the San Francisco bay is through daily household cleaning products such as laundry bleach. In a survey conducted by The Clorox Company‚ it was found that four out of five households use sodium hypochlorite bleach for their laundry. Since laundry detergent companies are not required to list every ingredient‚ customers are often not aware
Premium Water Water pollution Drinking water
Abstract The chloride present in an unknown soluble sample was precipitated into silver chloride through precipitation gravimetry. The colloidal silver chloride originally formed was converted to a crystalline solid by controlling certain parameters of the experiment such as temperature‚ pH of the solution‚ and concentration of AgNO3. Once the solid was large enough‚ it could be washed‚ filtered‚ and weighed. The percentage of chloride present was found to be 24.73695223 (±0.00000006) %.
Free Solubility Silver Ion