Experiment 2: Separation of a Mixture of Solids Purpose: This experiment allowed me to learn different separation techniques for various substances based on their specific chemical properties. Procedure: I began this experiment by using a magnet to pick up and collect the iron filings out of the mixture. Then the sand was separated by placing the mixture into a beaker and boiling it in distilled water in order to dissolve the salt and benzoic acid‚ once boiling the liquid was poured out leaving
Premium Water Distillation
Separation of a Mixture: Unknown # 12-Green Chemistry 221 with Professor Thomas Quale May 2012 Formal Lab Report Abstract An unknown sample‚ # 12-Green‚ was separated into its individual variable components‚ iron‚ ammonium chloride‚ silicon dioxide‚ and sodium chloride. The techniques used to separate the components of unknown # 12-Green‚ magnetism‚ sublimation‚ extraction‚ and filtration‚ were chosen based on the unique properties of each component. Using these separation techniques‚ each substance
Premium Chemistry Gas Separation process
Separation of a Mixture of Solids Lab: Separation of a Mixture of Solids Experiment PURPOSE The purpose of this experiment was to learn how to separate a mixture of solids. DATA | | |Data Table 1: Experiment Data | | |Grams |Percent of mixture | |Iron filings |2.2
Premium Separation process Mixture Analytical chemistry
Types of Mixtures Lab Purpose • To classify types of mixtures • To determine the polarity of substances Background Information: Polarity In the middle of the night of March 24‚ 1989‚ the giant oil tanker Exxon Valdez veered out of the shipping lanes in Alaska’s Prince William Sound and struck a reef. The side of the tanker was ripped open‚ and 11 million gallons of crude oil flowed out into Alaska’s clear blue waters. Because petroleum oil is insoluble (does not dissolve) in water and less
Premium Petroleum Exxon Valdez oil spill Water
Laboratory 4: Separation of a Mixture of Solids Numbers 1 to 4 below are not written out in your Lab Manual. They are provided here to help you do your calculations more clearly. 1. Separating out the Iron: Mass of Weighing Dish: ___0.6_______g (Read all masses to the decimal places allowed by the balance/scale‚ typically one or two decimals‚ i.e. a tenth or a hundredth of a gram.) Mass of Weighing Dish plus Solids Mixture: ____7.5______ g Mass of Solids Mixture: ___6.9_______ g Mass
Premium Sodium chloride Sodium Salt
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
Purpose: In this lab‚ a mixture of naphthalene (C10H8)‚ common table salt (NaCl)‚ and sea sand (SiO2) will be separated using the separation techniques in order to demonstrate the properties of mixtures and their ability to be separated by physical means. INTRODUCTION: This lab was based on the separation of the components of a mixture. A mixture can be defined as a physical combination of two or more pure substances. Separation techniques are used to separate components that are not chemically
Free Solubility Chemical substance Mixture
Separation of a Mixture of Solids I really enjoyed this lab. After reading the introduction I started by making my own flow sheet of how I thought this lab would work. I was reminded about solubility which is defined as the amount of the solute that will dissolve in a given amount of solvent and that the extent to which a substance dissolves depends mainly upon the physical properties of the solvent and of the solute and to some extent upon the solvent’s temperature. With that being said I came
Premium Solubility Oxygen Solvent
Components of a Mixture January 9‚ 2013 Hailey Rounds Partners: Kelsy Shay Katie Nelson Objectives: The purposes of this experiment are to separate two components in a mixture‚ specifically sodium chloride and silica‚ and find the correlating percent composition of each. Abstract: This experiment consisted of the separation of sodium chloride and silica. The mixture was separated by extracting the sodium chloride with water and drying both substances. Adding water to the mixture‚ stirring‚ then
Premium Water Sodium chloride Evaporation