and SiO2 in a Mixture with the use of Separation Techniques Castro‚ Sarleen G.* Cid‚ John Emmanuel V.‚ Clemente‚ Christian Joy G. Group 5‚ 1CHEM‚ Department of Chemistry‚ College of Science‚ University of Santo Tomas‚ España‚ Manila‚ 1015 August 24‚ 2012 Abstract A mixture can be homogenous or heterogenous‚ depending if the mixture has been uniform throughout the mixture or not. One of the objectives is to separate C10H8‚ NaCl and SiO2‚ and determine their percentages in the mixture. Since the mixture
Premium Chemistry Evaporation Water
Separating a Mixture of Compounds Exp. No. 2 name Chemistry 145 February 2‚ 2014 I. Purpose The purpose of this experiment was to separate this mixture into components‚ determine the mass and percentage of each component. In addition to test the accuracy of an alternative method of subtraction to find the mass of the sodium chloride directly. Start with a mixture of sand (SiO2)‚ sodium chloride (NaCl)‚ and ammonium chloride (NH4Cl)‚ and use these separation processes: sublimation filtration
Premium Sodium chloride Sodium Ion
Experiment # Title Student Name: Student Number: Section Number: 0103 TA: Stephen Ho Date the experiment were performed: Date the lab report was submitted: Introduction: (Ideally‚ one pages‚ maximum 2 pages) * Background information (one paragraph) * Purpose of the experiment (Should be stated in few sentences) * Theory (One to two paragraph)‚ including chemical reaction equation Experimental: (1-2 pages) * Still need to mention that the procedure was adapted from
Premium Chemistry Regression analysis
AND EXPERIMENTS USEFUL TIPS: Student’s experiments can be done in groups. Groups can be given different mixtures. Each group then carry out their own experiment‚ makes a write up of their procedure and presents to the rest of the class together with the samples obtained. UNIT 1: MIXTURES AND PURE SUBSTANCES This unit is suitable for senior one (S1) BRIEF DESCRIPTION OF THE UNIT: This unit deals with: • Methods of separating mixtures. • Methods of drying solids.
Premium Distillation Separation process Evaporation
Properties of Gases LabPaq - Properties of gases General Chemistry Introduction Background This report covers Properties of Gases and will allow me the opportunity to explore chemical and physical properties of gases. Collection and use of these gases will also be conducted in this lab. Statement of Problem Collecting gases is a difficult process. Singling out a gas and obtaining only that gas is the challenge we face in this experiment. Purpose of Experiment The purpose of
Premium Oxygen Chemistry
1. Separating out the Iron: 2. Separating out the Sand: 3. Separating out the Benzoic Acid: 4. Separating out the Salt: Grams Percent of Mixture Weighing Dish 0.5 .5/6 * 100= 8.3% 10cm Paper 0.6 .6/6 * 100= 10% Iron 1.9 1.9/6 * 100= 31.7% Sand 1.1 1.1/6 * 100= 18.3% Benzoic Acid 0.5 .5/6 * 100= 8.3% Salt 1.4 1.4/6 * 100= 23.4% Total 6.0 100% Questions: 1. How did your proposed procedures or flow charts at the beginning of this experiment compare to the actual procedures
Premium Water Kilogram Mass
Korleyfah Mouth Chem 331 Thursday 2:00pm Dr. Lijuan Li 20A Preparation of CuCl2~2DMSO 20B Preparation of RuCl2~4DMSO Abstract In order to synthesize our metal complexes‚ we were able to make both Copper and Ruthenium metals. From this‚ we combined each metal complex with DMSO by refluxing the compound. The metal complexes were analyzed through their melting point and IR spectroscopy to determine whether the metal bonded to a Sulfur atom or an Oxygen atom of the DMSO. After analyzing the IR spectrum
Premium Oxygen Sulfur Chemical element
Experiment D: Separation of Alcohols by Fractional Distillation Pre-lab Properties: Propanol‚ butanol‚ methanol Purpose: To separate two alcohols by distillation and analyze results with GC. Do not plug mantle directly into electrical outlet‚ use controller! Use 40/60 mol percent propanol/butanol (no cyclohexane or toluene are used in this lab because they are more toxic) Set up fractional distillation Set heat at highest level to start‚ then turn back down to 60-80% when vapor starts up column
Premium Distillation Ethanol
Separation of a Mixture Introduction: Mixtures are not unique to chemistry; you use and consume them on a daily basis. The beverages you drink each morning‚ the fuel you use in your automobile‚ and the ground you walk on are mixtures. Very few materials that you encounter are pure. Any material made up of two or more substances that are not chemically combined is a mixture. The isolation of pure components of a mixture requires the separation of one component from another. Techniques
Premium Water Distillation Liquid
A Report of Experiment 1 Purification and Identification of An Unknown Mixture Aim To separate a mixture of a neutral (ester‚ alcohol‚ ketone‚ aldehyde or ether) and an acidic compound (phenol or carboxylic acid) or a neutral and a basic compound (amine)‚ and to identify the unknown mixture by physical (M.P. or B.P.) and spectroscopic methods (NMR‚ IR and MS). Method The mixture (sample number: 27) was dissolved in 200 mL of CH2Cl2 and then extracted with 10% NaOH. The acid was removed
Premium Chemistry Molecule Chemical compound