Abstract
The short message system (SMS) of a standard mobile phone can be used for much more than just exchanging cryptic message. This application finds a humble mobile working for controlling external equipments. The SMS service provides by the service providers are comparatively low cost. Hence the system is highly efficient and low-cost.
Mobile phones have become a widespread means of communication. It becomes a part of everyday life with ever more people enjoying the service and extra freedom they provide. It works on the basis of Global System for Mobile Communication (GSM). A subscriber from any systems can access telecommunication services by using a Subscriber Identify Module (SIM) card in a handset suitable for the network on the visited system The Short Message Service allows text messages to be sent and received to and from mobile telephones. The text can comprise words or numbers or an alphanumeric combination. Because Simple person - to - person messaging is such an important component of total SMS traffic volumes, anything that simplifies message generation as well as extended utility of the SMS being sent is an important enabler of Short Message Service.
We will connect hardware kit i.e. GSM modem and microcontroller to the energy meter. The main aim of this project is whenever u r recharging with some amount say example Rs.100/- by doing SMS to the MODEM, the bulb gets automatically ON until your recharge gets zero. After getting your balance zero your device gets automatically switched OFF and you will get a message from the MODEM that you have to recharge your mobile and the process takes place continuously.
Block diagram:
GSM modem
8051 microcontroller
Energy meter
Hardware Used:
* AT command supporting GSM mobile phone. * 89c51 Microcontroller * Max 232 IC. * DB9 Connector * GSM Phone
SOFTWARE USED: 1. Keil u-Vision
Keil Software is used provide you with software development tools for 8051 based microcontrollers. With the Keil tools, you can generate embedded applications for virtually every 8051 derivative. The supported microcontrollers are listed in the µ-vision. 2. PRO51 Programmer Software
You May Also Find These Documents Helpful
-
SMS is a service available on most digital mobile phones that permits the sending of short messages (160 characters) between mobile phones and other handheld devices. SMS is commonly referred to as text messaging.…
- 581 Words
- 3 Pages
Satisfactory Essays -
SMS / Text Messaging – SMS is short for Short Message Services. Text messages are a way to send and receive messages over cellular data networks. Also, SMS / Text Messages can only contain up to 160 characters per packet.…
- 619 Words
- 2 Pages
Satisfactory Essays -
Short Message Service (SMS) is a text messaging service component of phone, web, or mobile communication systems. It uses standardized communications protocols to allow fixed line or mobile phone devices to exchange short text messages.…
- 821 Words
- 4 Pages
Good Essays -
Short Message Service is a text messaging service component of the mobile phone. It allows users to exchange short text messages.…
- 1403 Words
- 8 Pages
Satisfactory Essays -
SMS/Text Messaging use data communication. Short Messaging Service (SMS) is a way of sending/receiving messages containing a maximum of 160 character per message over mobile networks. These messages are broken into binary and sent as wireless data packets over mobile packets.…
- 311 Words
- 1 Page
Satisfactory Essays -
In the twenty-first century, texting is all the rage. If a person is in the market for a new phone, they may choose from a large selection of full keyboard phones to make texting easier and faster. Then there is the large choice of packages that are available. One can chose a plan with just minutes to talk or a plan with talk and text or even a plan with just texting. There is a plan out there for everyone. Texting may seem easy, convenient and the greatest invention in communication since E-mail but it has risks and disadvantages that many cell phone users do not realize.…
- 1297 Words
- 6 Pages
Better Essays -
Short Message Service (SMS) and Multimedia Messaging Service (MMS) are a communication service component of the GSM mobile communication system, using standardized communications protocols that allow the exchange of short text messages between mobile phone devices.[1] Some websites also allow you to communicate to mobiles via SMS for a fixed fee. To send an SMS you simply have to choose a contact from your phone, choose the text message, type up your message and then send it.…
- 1709 Words
- 7 Pages
Better Essays -
The term SMS is another term for Short Message Service. It refers to the means of written communication by means of a mobile phone. Text messaging allows mobile users to communicate privately without being heard by others. Sending an SMS messages is also a lot faster than composing e-mails. In addition it is very convenient because one does not need a computer, unlike instant messaging and e-mailing. Another advantage of text messaging is that whenever a text message is sent to a mobile phone, the message is stored in the SMSC. This means that even if the mobile phone is off or is unavailable, the message will still be received soon as the mobile phone is turned on or has a signal. Text messages can also be saved in the SIM card as long as it is not…
- 696 Words
- 3 Pages
Good Essays -
Text messaging or Short Messaging Service is a short form of sending messages in text form using mobile phones. It can send up to 160 characters or fewer; newer phones can hold up to 20 pages of 160 characters. Text messaging is the cell phone phenomenon that is changing the way people communicate through cell phones. T-Mobile sales representative in El Paso, Chris Yakubovsky, reports that well over 60 percent of all their cell phone communication is now being done via text messaging. He said that text-messaging plans are among the highest selling and most demanding of all the plans the phone company offers on a national basis.…
- 722 Words
- 3 Pages
Good Essays -
This System assigns a unique card number for each house. A particular house person places the RFID card within 5cm distance from the RFID Reader. The RFID Reader reads down the time, date and for how much amount it was recharged. The success of recharge will be indicated on the LCD display with buzzer acknowledgement sound. The display also indicates the current energy utilization. The Interface software is responsible for energy utilization record processing and calculation amount for…
- 9042 Words
- 37 Pages
Good Essays -
Basically we want to make a hardware system in which one can use the electricity until one is having the credit with the units of electricity in terms of token. The meter has a built in disconnecting device .and so the Consumption is restricted to payment. Automatic disconnection of the meter takes place on expiry of credit. The device is based on 8051 microcontroller. It uses IC-AT89S52 of 8051 family. The project is being made with the intention of getting into the practical application.…
- 554 Words
- 3 Pages
Satisfactory Essays -
port and verify for the password, if the password is correct then it will start…
- 664 Words
- 3 Pages
Good Essays -
The purpose of this project is to build a KWH (Kilo Watt Hour) meter that can alert the users with voice messages. An Energy meter or KWH meter is a device that measures the amount of electrical energy supplied to or produced by a residence, business or machine. Electricity is a clean, convenient way to deliver energy. The electricity meter is how electricity providers measure billable services. The most common type of meter measures kilowatt-hours. When used in electricity retailing, the utilities record the values measured by these meters to generate an invoice for the electricity. They may also record other variables including the time when the electricity was used. The idea behind this project is to construct the Energy Meter that is useful for illiterates and the busy people who cannot concentrate on the energy meter readings because of their busy schedule. This system helps the users by alerting them about the peak loads (max energy consumption), power status (ON/OFF), billing status etc. The voice alerts could be in any local language. Hence this system can be used across the world. The typical voice alerts are “Over load”, “Pay electricity bill”, “Turn off the lights” etc. This system also consists of a LCD display that continuously displays the energy meter readings in real-time. This consists of Real-time clock for calculating the average, max and minimum readings with respect to time. This information is display on a LCD display. This can be achieved by the use of microcontroller unit that continuously monitors and records the Energy Meter readings in its permanent (non-volatile EEPROM) memory location. Microcontroller also drives the voice module to play the voice messages based on the energy meter readings. This system also implemented for a single push button based load control for turning ON or OFF the loads.…
- 453 Words
- 2 Pages
Good Essays -
Science is basically "passive" observation of the universe as it exists to generate knowledge. Engineering is making use of that knowledge to meet human needs by creating machine, systems, process and technologies that have not previously existed. Design and manufacturing are the synthetic part of engineering practice. Manufacturer has received a lot of attention recently for very good economic reasons.…
- 3260 Words
- 14 Pages
Better Essays -
A smart meter is usually an electrical meter that records consumption of electric energy in intervals of an hour or less and communicates that information at least daily back to the utility for monitoring and billing purposes. Smart meters enable two-way communication between the meter and the central system. Unlike home energy monitors, smart meters can gather data for remote reporting. Smart Meters" usually involve real-time or near real-time sensors, power outage notification, and power quality monitoring.…
- 6853 Words
- 28 Pages
Good Essays