Preview

Touchless Manufacturing Case Study

Good Essays
Open Document
Open Document
799 Words
Grammar
Grammar
Plagiarism
Plagiarism
Writing
Writing
Score
Score
Touchless Manufacturing Case Study
Question 2)
Manufacturing plays a key role in modern economy. The last decades of globalization period drastically changed the manufacturing industry. Advancement in technology changed the traditional concepts of manufacturing and huge hike in production. Development of the manufacturing can be classified in to three era, beginning of manufacturing, current manufacturing, manufacturing in future.
Beginning of manufacturing: before all manufacturing operations were done by hand. Without any computer assistance in each step of production. All the manufacturing operations are performed by the highly skilled workers which keeps slow production and high demand.
Current manufacturing: highly automated with technologies at our finger tips. Customization of process and robotics cut down on processing cost. The time lag between process and human errors in assembly line could be avoided by highly automated systems. Work flow time and wastage of material could be eliminated by lean manufacturing and just-in-time. Flexible manufacturing technology allows to adjust quickly with unpredictable …show more content…
Millions of workers are required in short time period. To overcome this issues, touchless manufacturing technology implemented. This highly automated technology could not be possible without software. This highly automated touchless manufacturing works effectively when producing large volume and qualified tool. Great creativity and planning are required setup the system. advantage of touchless manufacturing are, improved quality, consistency of output, reduced labor cost. Disadvantage of touchless manufacturing are, its hazardous to environment, only highly monotonous works could be replaced. Industrial robots are good example touchless manufacturing. In circuit board mass production, industrial robots are used to place electronic component in circuit board with
Continue Reading
View Writing Issues

You May Also Find These Documents Helpful

  • Satisfactory Essays

    Quiz 3 busi 610
    • 888 Words
    • 8 Pages

    Quiz 3 busi 610

    Products of different sizes, types, and customer requirements freely intermingling on the assembly line is an advantage of lean manufacturing.…

    • 888 Words
    • 8 Pages
    Satisfactory Essays
    Read More
  • Good Essays

    capsim strategies
    • 2515 Words
    • 9 Pages

    capsim strategies

    Production: We will significantly increase automation levels on all products. However, because automation sets limits upon our ability to reposition products with R&D, we automate more in the slower moving Traditional and Low End segments than in the fast moving High End, Performance, and Size segments. We will prefer second shift/overtime to capacity expansions.…

    • 2515 Words
    • 9 Pages
    Good Essays
    Read More
  • Good Essays

    How Did The Marshall Plan Affect The Economy
    • 568 Words
    • 3 Pages

    How Did The Marshall Plan Affect The Economy

    During World War II, many factories had been geared towards outfitting military units with vehicles. After the war, the war level demand dropped and industry had spare capacity. Vehicles are particularly important to an economy, because of all of the components that go into making a car. Mass production meant that a factory commonly specialized in one, or a small amount of parts. Many factories would need to be set up to facilitate all of the parts that go into the vehicles.…

    • 568 Words
    • 3 Pages
    Good Essays
    Read More
  • Good Essays

    Dbq Industrialization
    • 546 Words
    • 3 Pages

    Dbq Industrialization

    Britain started its industrialization period in the eighteenth century, while America was just starting to start theirs during the antebellum period. From 1814-1865 manufacturing grew in many ways. “Population grew by a factor of 4, outputs of manufacturing grew by a factor of 12, and the value of manufactured goods grew by a factor of 8.” These growth factors mainly occurred in the New England area. Agriculture was the main sector until people learned about how manufacturing worked. The use of interchangeable parts was a huge contribution to the advancement of industrialization.…

    • 546 Words
    • 3 Pages
    Good Essays
    Read More
  • Good Essays

    Hitachi Seiki Case
    • 495 Words
    • 2 Pages

    Hitachi Seiki Case

    Hitachi Seiki stayed on top of their competitors with a competitive priority producing the best product quality for their customers. To meet this standard Hitachi Seiki set forth a new engineering discipline called Mechatronics, which is the integration of mechanical design and electronics. With this new discipline the company can take action in Flexible Manufacturing Systems (FMS) to be able to meet the needs of their customers and be as flexible as possible to cater to them. The case states, “There were many problems with the new technology, and developments in automation did not materialize as rapidly as expected. As a result, many companies stuck with traditional manufacturing processes.” This set Hitachi Seiki apart from the other companies and they had a competitive advantage among the other companies.…

    • 495 Words
    • 2 Pages
    Good Essays
    Read More
  • Powerful Essays

    Studio Learning Task No 1
    • 1454 Words
    • 6 Pages

    Studio Learning Task No 1

    Industrial manufacturing was different from the traditional way of making a product because products weren’t hand made anymore, but produced though machinery.…

    • 1454 Words
    • 6 Pages
    Powerful Essays
    Read More
  • Powerful Essays

    Managing Production Ramp-Up in Manufacturing Networks
    • 14566 Words
    • 59 Pages

    Managing Production Ramp-Up in Manufacturing Networks

    Production and manufacturing companies today in a bid to achieve time to market and time to volume makes use of production ramp-up. Effective and rapid returns in investing in newly manufactured product to maintain cost and volume as well as considerable manufacturing quality. Also, this research is aimed at achieving cost effective and market potentials by implementing ramp-up production process in manufacturing industries. Through production performance, speedy time to market and time to volume could be achieved with effective collaboration between production development performance and production ramp-up. This relationship promotes the fast achievement of time-to-volume compared with the silent leading hypothesis of time-to-market. The level of learning is very important as well as the sources of learning like engineering time, experiments as well as normal experience. Supply chain capabilities are used to promote and encourage meaningful growth and development so as to achieve time to market and time to volume. These supply chain capabilities are used to integrate customers and manufacturers as well as supply and demand in the market.…

    • 14566 Words
    • 59 Pages
    Powerful Essays
    Read More
  • Satisfactory Essays

    Effects Of Industrialization On American Life
    • 102 Words
    • 1 Page

    Effects Of Industrialization On American Life

    Industrialization is the process where an economy is transformed from agricultural to one based on the manufacturing of goods. Individual manual labor is often repealed and replaced by mechanical mass production(machines), and skilled workers are replaced by assembly lines.The increase in industry largely increased foreign trade and introduced mass production, which moved manufacturing away from handmade goods and cottage industries into large-scale mechanized factories. Industrial growth that began in the United States in early 1800s and continued steadily up to and through the American Civil War. The industrial growth had major effects on American life. The new business activity based on…

    • 102 Words
    • 1 Page
    Satisfactory Essays
    Read More
  • Powerful Essays

    MU1 Assignment 2
    • 1726 Words
    • 6 Pages

    MU1 Assignment 2

    In manufacturing companies, production is usually the most important aspect of the entire process mostly due to the high cost incurred, the staffing and the complexity of the departments involved –…

    • 1726 Words
    • 6 Pages
    Powerful Essays
    Read More
  • Better Essays

    Social Changes During The Industrial Revolution
    • 1457 Words
    • 6 Pages

    Social Changes During The Industrial Revolution

    The development of the factory system and mass production was one of the main and most important results of the Industrial Revolution, creating a new economic system, new social classes, many inventions vital to the functioning of today’s society, etc. The factory system was developed in response to the dexterity of the steam engine that had been recently developed. In response to the steam engine, water frames,…

    • 1457 Words
    • 6 Pages
    Better Essays
    Read More
  • Satisfactory Essays

    Vizio Case
    • 364 Words
    • 2 Pages

    Vizio Case

    In the future, more and more companies will choose the globalization in production which is applied to their business, the manufacturers to…

    • 364 Words
    • 2 Pages
    Satisfactory Essays
    Read More
  • Powerful Essays

    Computer-Integrated Manufacturing
    • 2192 Words
    • 9 Pages

    Computer-Integrated Manufacturing

    CIM separated its self from other manufacturing methods in three distinct ways. First, how the data is stored, recovered, changed and presented. The second is the devices for detecting state and changing the processes. Finally, the third is the use of algorithms for combining the data processing component with the sensor/modification component. The streamlining of these processes increase and enhances productivity and allow for more complex manufacturing techniques to be imposed (CIM).…

    • 2192 Words
    • 9 Pages
    Powerful Essays
    Read More
  • Powerful Essays

    Layout Plan.
    • 14087 Words
    • 57 Pages

    Layout Plan.

    Bill Ford has built a new assembly plant on the site, designed for flexibility and sustainable manufacturing. With flexible equipment and new processes, Ford’s able to ship 90% of vehicle orders the same day. By manufacturing three vehicle platforms and nine different models on a single assembly line, the line has 40% fewer workstations and teams of workers controlling “their own piece of the world.” The flexible manufacturing body shop consists of 16 work cells producing 300 standard parts. Web connections on the plant floor enable workers to share information directly with suppliers, product engineers, and customers. A team leader, for example, can take a digital photo of a poorly fitting part, send it over the Web to a supplier, and get an engineering fix in minutes. Parts delivered directly to the assemble area cut…

    • 14087 Words
    • 57 Pages
    Powerful Essays
    Read More
  • Better Essays

    Advanced Manufacturing Technology
    • 4739 Words
    • 19 Pages

    Advanced Manufacturing Technology

    References: [1] A. Ajmal, S.G. Zhang, Feature-based automated inspection planning: a review and its impact on integrated manufacturing system, in: Proceedings of the 12th Conference of the Irish Manufacturing Committee, IMC 12 Competitive Manufacturing, University College Cork, Cork, Ireland, September 6±8, 1995, pp. 847±854. [2] T.H. Hopp, K.C. Lau, A hierarchical model-based, control system for inspection, in: Proceedings of the First International Symposium on Automated Integrated Manufacturing, ASMT, San Diego, CA, Vol. 1, April 5±6, 1983, pp. 32±36. [3] F.L. Merat, G.M. Radack, Automatic inspection within a featurebased CAD system, Robotics Comput.-Integrated Manuf. 9 (1) (1992) 61±69. [4] S. Kim, S. Chang, The development of the off-line measurement planning system for inspection automation, Comput. Ind. Eng. 30 (3) (1996) 531±542.…

    • 4739 Words
    • 19 Pages
    Better Essays
    Read More
  • Good Essays

    Industrial Robot Control System
    • 477 Words
    • 2 Pages

    Industrial Robot Control System

    A robot must have a control system to operate its drive system, which is used to move the arm, wrist, and body of a robot at various paths. When different industrial robots are compared with their control system, they can be divided into four major types. They are:…

    • 477 Words
    • 2 Pages
    Good Essays
    Read More

Related Topics