How to Map As400 Network Drive

How to MAP Network Drive

Contents

Contents 3 1. Validate that iSeries server for Netserver is started 4 You must have *IOSYSCFG special authority to change any part of iSeries NetServer configuration. These changes will take effect the next time iSeries NetServer is started. 4 2. Validate that the iSeries Netserver profile is enabled 4 3. View a list of iSeries NetServer shared objects 5 4. Create an iSeries NetServer file share 5 5. Access iSeries NetServer file shares with a Windows client 6 6. Revision Trail 8 6.1 Approval Control 8 6.2 Document Change Log 8

Validate that iSeries server for Netserver is started

You must have *IOSYSCFG special authority to change any part of iSeries NetServer configuration. These changes will take effect the next time iSeries NetServer is started.

1. Log on to AS400 iSeries system.
2. Use the WRKSBS command to confirm that the Qserver subsystem is started
3. Use the Work with Active Job (WRKACTJOB) command to verify that there is a QZLSSERVER job running under the QSERVER subsystem. If the QZLSSERVER job is not active, you must restart iSeries NetServer.
4. Use the Work with TCP/IP Network Status (NETSTAT *CNN) command to verify that the following entries appear in the NETSTAT output file. If you cannot find these entries, then you must restart iSeries NetServer. ** netbios>001:27:44 Listen ** netbios>000:00:01 *UDP ** netbios>000:00:00 *UDP ** netbios>000:30:57 Listen ** cifs>427:49:42 Listen
5. To stop and start iSeries NetServer, use the following commands: STRTCPSVR *NETSVR ENDTCPSVR *NETSVR

All configuration changes made to iSeries NetServer, with the exception of share