ASSEMBLY OF THE HIGH PRESSURE MODULE OF STEAM TURBINE
APOORV MOHAN SHRIVASTAV
UNDER THE GUIDANCE OF
Shri. Jagarnath Orav
Senior Manager (IMM)
BHARAT HEAVY ELECTRICALS LIMITED, BHOPAL (MADHYA PRADESH)
MANIPAL INSTITUTE OF TECHNOLOGY
(A Constituent College of Manipal University)
MANIPAL – 576104, KARNATAKA, INDIA
This is to certify that this project report carried out by Mr. APOORV MOHAN SHRIVASTAV, student of B.E. AUTOMOBILE ENGINEERING, of MANIPAL INSTITUTE OF TECHNOLOGY, MANIPAL (KARNATAKA), is hereby accepted and approved. The report is Submitted in fulfilment for the requirement of the course. It is a bona-fide record of the work done by him under supervision of SHRI. Jagarnath Orav (Senior Manager) during his stay as a trainee at IMM Division, BHEL, BHOPAL, from July 4, 2013 to July 31, 2013.
Shri Jagarnath Orav
Senior Manager (I.M.M.)
We would like to express our heartfelt gratitude towards Shri Jagarnath Orav (Senior Manager, IMM) for guiding us and giving us his invaluable and precious time. He directed us to learn about the machines, which were new to us. Without his help and support the completion of this project would have been a very difficult task. We would also like to thank our instructor Shri Satish Kumar Dubey who helped us enormously throughout. We would also like to thank Shri J.C. Sharma and Shri Suresh Nema (HRDC) for helping us in the allocation of appropriate departments and in a hundred little ways. Thanking the dedicated officials and staff of Steam Turbine Department, we would like to make a special mention of Shri Anand Dubey, Shri Sudipto, Shri Sumesh for giving us practical knowledge and day to day utility of the subject. We would also like to thank Shri R.B. Patil (AGM, Steam Turbine) for providing his constant help and support. Last but not the least, we would like to thank BHEL for providing us the platform to enhance our practical knowledge.
APOORV MOHAN SHRIVASTAV (REG NO- 100934207)
MANIPAL INSTITUTE OF TECHNOLOGY , MANIPAL, KARNATAKA- 576104
* Station : BHEL (Bharat Heavy Electricals Limited) * Centre : Bhopal (Madhya Pradesh) * Duration: 4th July 2013 to 31st July 2013 * Date of submission : 31st July 2013 * Title of the project : Assembly of High Pressure Module of Steam Turbine. * Name of student: Apoorv Mohan Shrivastav * Discipline: B.E. Automobile Engineering
Name of expert Designation
Shri Jagarnath Orav, Senior Manager, Industrial Machine Manufacturing Division, BHEL, Bhopal
Key words : Rotor, Inner Casing, Outer Casing, Blades
The basic aim of the project is to understand the working and assembly of steam turbine. The project lays stress on high pressure module of the steam turbine. For this, BHEL has provided us a platform to visually understand the assembly of Parli Project, which is undergoing in the shop unit. It basically consists of inner casing, outer casing, blades and rotor. The principle used in steam turbine is the temperature entropy curve. High pressure module is coupled with intermediate pressure module which is coupled with low pressure module which is further connected to boiler. High pressure part is in turn connected to condenser and generator and hence is used in the production of electricity. The Parli project in BHEL Bhopal of high pressure module of steam turbine is based on barrel system and hence all assembly is done vertically. Time taken is...
Please join StudyMode to read the full document