Pig iron Essays & Research Papers

Best Pig iron Essays

  • Iron in America - 4411 Words
    History of Iron and Steel I have researched the origin of hot metal cars for many years. In the very early years of iron production and later steel production historical is sketchy at best. Almost in plant equipment was built on sight and sometimes no drawings were used. The ability of American fabricators in the late 1700 and the 1800 amazes me. A case in point is Otto Mears a German immigrant that built most of the three foot gauge railroads in the Colorado Rockies. He had a third grade...
    4,411 Words | 13 Pages
  • Iron and Metal Work - 1303 Words
    Smelting reduction processes Description In general, the pyrometallurgical smelting reduction of metals from oxidic residues requires a reduction of the relevant oxides (normally using carbon as a reductant) and a subsequent melting to separate the metals from the other slag-forming components. There are two different types of processes (the Primus® technique and the Redsmelt® process) which are described below. The Primus® technique using a two-step process, consists...
    1,303 Words | 4 Pages
  • Iron & Steel Industry - 258 Words
    Summary Iron & Steel is a key infrastructure industry. India is one of the top 11 producers of Iron & steel in the world. Steel industries constitutes an important segment of the modern industrial economy of India. Steel is one of the highly capital intensive industries unlike most other mineral based industries. Location of cement plants is widely spread throughout the country where the availability of the basic raw materials like limestone. Excess capacity and slower-than-expected demand...
    258 Words | 1 Page
  • Life in the Iron Mills - 2107 Words
    19/03/13 The relationship of the soul to the body in Life in the Iron Mills In Life in the Iron Mills the bodies of the miners have been invaded by their environment. The barriers of their skulls and skin have been breached and their hearts and souls are as smeared with soot as their hands. They are likened time and again to cats, dogs and horses, “dumb”, “stunned” beasts whose humanity flickers weakly under piles of pig iron and dirt. Davis not only attacks the false ideal of the healthy,...
    2,107 Words | 5 Pages
  • All Pig iron Essays

  • Iron & Steel Industry in India
    The objectives of the study are as follows: To analyze the top and bottom five Iron and Steel Industries in India Analyzing the trend of key ratios across the top and bottom five Iron and Steel companies in India Finding the factors responsible in the production of Iron and Steel To analyze the data of the associated factors and finding a model for demand in Indian Iron and Steel Industry in 2010 Overview The steel industry is a dynamic,...
    6,391 Words | 17 Pages
  • Iron and Steel Industry - 11494 Words
    1. INTRODUCTION 1.1 Field Of Research The field of research is to study the factors which affect the profitability of IRON AND STEEL industry, which is the most crucial element for the growth of any developed or developing economy. It acts as backbone of human civilisation. It is a product of a large and technologically complex industry having strong forward and backward linkages in terms of material flows and income generation. With regards to Indian Economy it is one of the most energy...
    11,494 Words | 37 Pages
  • Overview of Iron and Steel Industries in India
    IRON AND STEEL INDUSTRY Submitted by Vivek Agarwal Roll No-68 | | TABLE OF CONTENTS 1. ACKNOWLEDGEMENT 3 2. ABSTRACT 7 3....
    7,130 Words | 43 Pages
  • Iron Ore and Chinese Steel Industry

 Iron Ore 
 Coke Direct Reduced Iron Pig Iron Project

    1,646 Words | 8 Pages
  • Analysis on the developmental scenario of “IRON AND STEEL INDUSTRY” in India.
    INSTITUTE OF LAW, NIRMA UNIVERSITY Project on Analysis on the developmental scenario of “IRON AND STEEL INDUSTRY” in India. Submitted by: PATHMAJA RAGHUNATHAN (10BBL044) Subject: Legal Economics Programme: B.com L.L.B. (Hons.) Semester: 3rd Year: September, 2011 Submitted To: Prof. Arun Prasad (Course Coordinator) TABLE OF CONTENTS S.NO. CONTENT PAGE NO. 1. DECLARATION 04 2. CERTIFICATE 05 3. ACKNOWLEDGEMENT 06 4. CHAPTER-1 INTRODUCTION...
    8,103 Words | 32 Pages
  • A Linear Programming Model of Integrated Iron and Steel Production
    A LINEAR PROGRAMMING MODEL OF INTEGRATED IRON AND STEEL PRODUCTION *t TmOR FABIAN University of California, Los Angeles Integrated steel mills usually have a choice over the use of various materials and production procMses. Different ores may be used in the proiduction of iron; steel scrap and iron can be used in different proportions in the production of steel. The economical usage rate of all materials is a fimction of numerous variables, among which the market price of some materials,...
    10,514 Words | 34 Pages
  • Production of iron ore and steel industry layout
    A ) raw material base of iron ore and steel distribution business Establishment of China's steel enterprises , the vast majority of iron ore resources in or near the area of ​​distribution . Table 3.2.19 lists 51 major steel companies have the ability to blast their combined annual production of pig iron capacity of 85.61 million t, accounting for 73.87 percent of the total national production of pig iron capacity . ( 1 ) Yangtze River iron ore raw material base of the raw material...
    1,623 Words | 6 Pages
  • Employee Job Satisfaction at Sail
    Executive Summary: Job Satisfaction has been defined as a pleasurable emotional state resulting from the appraisal of ones job; an affective reaction to one’s job and an attitude towards one’s job. The main objective of this project is to assess the satisfaction level of employees in Bhilai Steel Plant .Job Satisfaction describes how content an individual is with his or her job.it is a relatively recent term since in previous centuries the jobs available to a particular person were often...
    4,003 Words | 12 Pages
  • Om Chapparal Steel - 8051 Words
    OPERATIONS MANAGEMENT ASSIGNMENT ON CHAPARRAL STEEL (ABRIDGED) SUBMITTED TO: PROF. N. NARAYANAN SUBMITTED BY: SECTION D – GROUP 7 MAYANK GUPTA – ABM09027 SHILPA AGARWAL – PGP28177 SONIA RAO – PGP28209 VISHAL DASSANI – PGP28224 TABLE OF CONTENTS SERIAL NUMBER | TOPIC | PAGE NUMBER | 1. | Introduction | 2 | 2. | Product Strategy | 3 | 3. | Manufacturability | 4 | 4. | New Product Opportunities | 4 | 5. | Product Mix | 4 | 6. | Competition | 5 | 7. | Strategic...
    8,051 Words | 25 Pages
  • tata steel - 2857 Words
    2,857 Words | 10 Pages
  • Nucor Analysis - 1975 Words
    Summary Nuclear Corporation of America was involved in the nuclear instrument and electronics business. In 1964, the company’s board of directors opted for new leadership due to suffering several money-losing years and facing bankruptcy. F. Kenneth Iverson was the new leader, president, and CEO of Nuclear Corporation. F. Kenneth decided that the best way to rebuild the company was to expand around its profitable South Carolina. Iverson was already the head of Vulcraft before adopting Nuclear...
    1,975 Words | 6 Pages
  • Out of This Furnace Analysis
    Steel Mill Immigrants Of Industrial America For many Americans, the late nineteenth century was a time of big business, marked by economic and social evolution. In the period between the 1880 and 1920, the American economy was growing at a rapid pace. Many European immigrants without industrial skills flooded into American factories and steel mills. These new comer's came in search of better economic opportunity, which paved the way for Heavy, low paying labor that became the job description...
    887 Words | 2 Pages
  • How a Steel Mill Works
    How A Steel Mill Works The principal consumables employed in steel production are iron ore, coal, scrap metal and electrical energy. The importance of each of these consumables depends upon the technological processes adopted at each mill. In a classic integrated mill, coal and iron ore are the main consumables. In semi-integrated mills, scrap iron is the mainstay. An integrated mill comprises four basic operations – reduction, refining, solidification, and rolling – to convert iron ore...
    1,145 Words | 4 Pages
  • Dsp and Industrial Relations - 1066 Words
    Case study report on Durgapur Steel PlantAyodhya Paikaray Durgapur Steel Plant (DSP) Durgapur Steel Plant is one of the integrated steel plants of Steel Authority of India Limited (SAIL), located in Durgapur, in the eastern Indian state of West Bengal. It has played a historically important part in the industrial development of India. It was set up in the late 1950s with an initial annual capacity of one metric tonnes of crude steel per year, the capacity of DSP was later expanded to 1.6...
    1,066 Words | 5 Pages
  • Andrew Carnegie and Monopoly - 1102 Words
    A monopoly can be defined in many ways. According to the research that I have done, a monopoly in my own words is a company or a group that owns all or almost all of the market for only a given type of product or service. Absence of competition is what typically leads to the formation of a monopoly which results in high prices and subordinate products. The history of monopolies itself goes way back to the colonial times. Monopolies are great economic powers that have had positive consequences to...
    1,102 Words | 3 Pages
  • Swot Nucor - 388 Words
    SWOT Analysis-NUCOR Strengths * Nucor holds a leading marketing position in North America in the steel producing industry. In 2011, Nucor held the most shares in the markets for rebar steel, cold finished steel, structural steel, steel joist, and rebar fabrication. * Nucor is North America’s largest steel recycler. The company uses scrap steel to produce steel products. Nucor’s recycling efforts lead to higher efficiency and better productivity. * Nucor is known for producing...
    388 Words | 2 Pages
  • Ethnography - 3273 Words
    Jenna Scherrah Rachel Griffo English 202 November 3, 2014 What is it about Magnitogorsk that people like? This place my family knew as home is not a place others would call safe. By the Ural River, in west Chelyabinsk Oblast lays one of the largest cities in Russia, Magnitogorsk. In fact, they produced half of the Russian tanks in World War II. Sadly, population in this area was stalled by the increasing pollution being sent into the air from Magnitogorsk Iron and Steel Works. I remember my...
    3,273 Words | 8 Pages
  • Chemistry - 3313 Words
    Data-based questions Study the photos below and answer the following questions. Photo A Photo B Photo C (a) What are industries shown in photos A, B and C respectively? (3 marks) (b) Draw a diagram to illustrate the manufacturing system of the industry shown in photo A. (4 marks) (c) Describe and explain the characteristics of these three industries. (i) Photo A (3 marks) (ii) Photo B (3 marks) (iii) Photo C (in tradition) (3 marks) (d) How do personal factors...
    3,313 Words | 13 Pages
  • Project on Jindal Steel - 686 Words
    INTRODUCTION Jindal Steel and Power Limited (JSPL) is an Indian steel and energy company based in New Delhi, India. With annual turnover of over US$4 billion, Jindal Steel & Power Limited (JSPL) is a part of about US$17 billion diversified O.P. Jindal Group. JSPL is a leading player in steel, power, mining, oil and gas and infrastructure. Naveen Jindal, the youngest son of the late O P Jindal, drives JSPL and its group companies Jindal Power Ltd, Jindal Petroleum Ltd., Jindal Cement Ltd....
    686 Words | 2 Pages
  • Market Structure of Steel Industry
    Profile of Steel Industry in India (Managerial Economics) CONTENTS Introduction Market Size Investments Government Initiatives Steel Prices Supply and Demand Analysis Cost of production Production Functions and Input: Fixed & Variable Inputs: Total & Average cost: Calculating...
    4,959 Words | 19 Pages
  • G-Steel - Company Case Study
    G-STEEL PUBLIC COMPANY LTD: Company Case Study G-STEEL PUBLIC COMPANY LIMITED COMPANY DESCRIPTION G-STEEL Public Company Limited was founded by Dr. Somsak Leeswadtrkul, and is considered a leader and a pioneer of the Thai and Southeast Asian steel industry with more than 40 years of experience in hot rolled coils manufacturing. The plant is located in Rayong, which is about 175 kilometers from Bangkok, Thailand. The grand opening of G -Steel was on 30 March 2000 with the support from the...
    2,223 Words | 10 Pages
  • Study of Slew Bearings - 5698 Words
    STUDY OF SLEW BEARING CHANGING PROCEDURE OF STACKER CUM RECLAIMER CERTIFICATE This is to certify that the project report entitled “STUDY OF SLEW BEARING CHANGING PROCEDURE OF STACKER COM RECLAIMER” that is submitted by P.LAXMINARAYANA, P.SAMEERA, K.V. PRAMOD, V.BALAJEE and A.P.R.MALLESHWAR RAO in partialfulfillment for award of degree of Bachelor of technology in Mechanical Engineering to the GITAM UNIVERSITY, is a record of confide work carried out by them under my guidance and...
    5,698 Words | 26 Pages
  • Metal of Pakistan - 8811 Words
    [pic] P R E F A C E The good name and fame associated with business graduates are attributed to the food high level of studies, both inside the classroom and in practical field environment. This aspect has made them prominent among other students. The students of business administration are not restricted to the bookish neither teaching nor they are required to become cramming parrots. They are made to observe how theory is transformed into...
    8,811 Words | 32 Pages
  • Nucor Corporation - 1478 Words
    Assignment 1: Strategic Management and Strategic Competitiveness Katie Cloud Professor S. Turner BUS499: Business Admin Capstone 7/12/2013 Assess how globalization and technology changes have impacted the corporation you researched. Nucor Corporation has been known as a leader in the steel production industry since it was founded in 1955 as Nuclear Corporation of America (www.nucor.com). In the steel production industry, globalization is the driving force that affects competition....
    1,478 Words | 5 Pages
  • Nucor Strategy - 366 Words
    4. What type of strategy has Nucor followed? Which of the five generic strategies discussed in Chapter 5 is Nucor employing? Is there any reason to believe that Nucor has achieved a sustainable competitive advantage over many of its steel industry rivals? Is so, what type of competitive advantage does Nucor enjoy? Since F. Kenneth Iverson took the role of CEO at Nucor, he guided the company to work under a focused low-cost leadership strategy, with great focus in high quality and employing...
    366 Words | 1 Page
  • Operations Management Project Synopsis
    1,934 Words | 7 Pages
  • Sail Project Report - 22833 Words
    PROJECT REPORT ON AN ORGANIZATION STUDY AT SAIL-BHILAI by RAJANI KANT AA1032 For partial fulfillment of the requirements of final year MBA curriculum of Two years Full time MBA (Industry Integrated) Programme. Submitted to: Through STUDENT’S DECLARATION I hereby solemnly affirm, declare and state that report titled “AN ORGANIZATION STUDY ON SAIL BHILAI” was done by me with due diligence and sincerity and this report based on that study is a bonafied work by me and submitted...
    22,833 Words | 82 Pages
  • Plain Talk - 1081 Words
    “Plain Talk” Lessons From a Business Maverick. The book “Plain Talk” Lessons from a Business Maverick written by Ken Iverson, was a truly inspiring, and refreshing look into how a small company like Nucore a very small company of 500 people at the time could take on behemoth companies like United States Steel Corp. and Bethlehem Steel and ton for ton out produced them in a proportional manufacturing race of steel. The Goliath’s of the industry sitting fat and happy stuffing there...
    1,081 Words | 3 Pages
  • Carnegie Steel - 641 Words
    Carnegie Drove Steel Home Andrew Carnegie grew up as a son of a weaver craftsman and a mother who went to work to help support the family when the stream weaving loom came to Scotland. Andrew later wrote, after seeing my dad begging for work I knew I would be the one to fix it. I determined that Andrew Carnegie was a captain of industry. He was a captain of industry because he, helped build the formidable American steel industry, supplied jobs to many people who were out of jobs because of...
    641 Words | 2 Pages
  • Blood on the Forge by William Attaway: Review
    Bryan Casallo Dr. Bailey April 17, y Blood on the Forge Book Review “Steel is born in the flames and sent out to live and grow old. It comes back to the flames and has a new birth. But no one man could calculate its beginning or end. It would end when the earth ended. It seemed deathless.” (302) Blood on the Forge, by William Attaway, illustrates one of the most important historical event in United States history, The Great Migration. Attaway sets Blood on the Forge in the midst of...
    1,154 Words | 4 Pages
  • educational goal attainment model
    1,045 Words | 4 Pages
  • DBQ was carnegie a hero
    Born from nothing and made into something. Andrew Carnegie was one the of most famous business men in America. He was born in Scotland and was immigrated to America with his family. They lived in a small house in Pittsburgh and they had little money. In some ways he was a hero and in some ways he was not. A hero is someone who is admired for courage, outstanding achievements, or noble qualities. Carnegie was a hero because he was a philanthropist and was the reason that the United States became...
    402 Words | 2 Pages
  • Was Andrew Carnagie A hero
    US History 2 Was Andrew Carnegie A Hero Andrew Carnegie grew up in Dunfermline, Scotland and immigrated along with his family to the United States in the late 1800s. He worked his way up from being a poor Irish immigrant to become one of the most famous philanthropists that helped transform the U.S steel industry in the late 19th century. Andrew Carnegie was a hero in many ways. One reason why Andrew Carnegie was a hero was because of his influences on renovating the American steel...
    282 Words | 1 Page
  • Heavy Melting Steel - 3972 Words
    |Ratanpur Steel Re -Rolling Mills Limited | |A brief presentation | |HR & Admin | Table of Contents Contents Page Number WHO WE ARE 3 OUR BOARD OF DIRECTOR(S) 4 OUR MANPOWER 5 ORGANOGRAM OF FACTORY (Production Related) 6...
    3,972 Words | 23 Pages
  • Jamsethpur - 2059 Words
    Moral Minefield | Has Tata Steel, one of India’s oldest and most admired corporates, diverged from the ethical path laid down by its founding fathers? | | By DIVYA GUPTAPublished :1 November 2011 | | | | Text Size | | | | | | | Print this page | Email this page | Add to favourites | Share with friends | | | | | | | | Single page | | | | PHOTOGRAPHS BY AKSHAY MAHAJAN | | The hundred year old Tata Steel plant’s chimneys pumping out...
    2,059 Words | 6 Pages
  • Nucor Strategic Issue - 6527 Words
    copyright - University of Dayton students - angie, nancy, lisette, kim, bob Contents 1. Identification of a Significant Strategic Issue 3 2. Analysis 4 2.1 General/ External environment 4 2.2 Industry environment 6 2.3 Segment analysis/ Strategic groups 8 2.4 Competitive dynamics 8 2.5 Business level strategy 9 2.6 Value 10 2.7 Internal environment 11 2.8 Value chain and value proposition 15 2.9 Corporate level strategy 16 2.10 Mechanisms 17 3. Identification and Evaluation of...
    6,527 Words | 24 Pages
  • Study of Market Structure- Indian Steel Sector
    Market Structure- Steel sector in India Indian Steel Sector: An Overview Steel is crucial to the development of any modern economy and is considered to be the backbone of human civilization. The level of per capita consumption of steel is treated as an important index of the level of socioeconomic development and living standards of the people in any country. The Indian steel industry has made a rapid progress on strong fundamentals over the recent few years. The industry is getting all...
    1,522 Words | 6 Pages
  • Chaparral Steel - 2195 Words
    Question 1 Consider the company’s operations during the years from 1975 to 1979, and answer the following questions: a. How has the above complex approach actually worked, over these four years? What was the outlook (as of the case date) for further progress in this matter? In 1975 Chaparral Steel commissioned minimill and started production. Minimills are different from traditional integrated steel plants. In minimill an Electric Arc Furnace (EAF) is used for steel making purpose and in...
    2,195 Words | 7 Pages
  • Case on CVP - 1787 Words
    Anandi Steel Co Ltd About the company Anandi Steel is an Indian iron and steel company, with its headquarter in Kalingnagar Industrial complex, Jajpur having a global reputation for landmark production and safety practices which have played a central role in global benchmarking process in the steel industry. Mission and Vision The vision of the company is to be the world-wide leader in the steel and Iron products through excellence in operational standards and cost leadership. The...
    1,787 Words | 6 Pages
  • Mittal and the Growth of Mittal Steel
    Assignment III Lakshmi Mittal and the Growth of Mittal Steel For MGMT 235 International Business Submitted by Djenane Jeanty July 26, 2011 To Professor Frederick L. Fisher, II Mittal Steel is a huge conglomerate built and controlled by Lakshmi Mittal and his family. The corporation is registered in Rotterdam, is listed on the Netherlands and New York stock exchanges and has operations throughout much of the world (World Socialist, 2011). While Mittal was born in India and holds an...
    641 Words | 2 Pages
  • Andrew Carnegie: Hero or Not?
    Sara Abdelbarry US History II Andrew Carnegie DBQ Hero. This word applies to a person who steps out of any planned schedule to do good deeds. They take sacrifices to help others and make an impact on many people’s lives. Heroes inspire others in the same field to emulate them. They often are good people without needing any type of recognition. America needed heroes in it’s times of economic struggle. There are mixed feelings whether Andrew Carnegie, the huge businessman, deserves the title...
    599 Words | 2 Pages
  • Comparative Analysis of Csr Activities of Psus
    Steel Authority Of India |Steel Authority of India Limited (SAIL) is the leading steel-making company in India. It is a fully integrated iron and steel | |maker, producing both basic and special steels for domestic construction, engineering, power, railway, automotive and defence | |industries and for sale in export markets. | | ...
    1,902 Words | 10 Pages
  • Metamorphosis of Tata Steel -the Challenges of Change Management
    METAMORPHOSIS OF TATA STEEL -THE CHALLENGES OF CHANGE MANAGEMENT "There is nothing more difficult to take in hand, more perilous to conduct, or more uncertain in its success, than to take the lead in the introduction of a new order of things." — Niccolo Machiavelli The Prince (1532) "In times of rapid change, experience could be your worst enemy." — J. Paul Getty INTRODUCTION 1. Tata Steel is the largest steel company of the country and at present stands as the 10th largest...
    4,847 Words | 17 Pages
  • Baosteel Group - 329 Words
    Baosteel Group - Governance with Chinese Characteristics 1. DO YOU THINK THE BAOSTEEL GROUP SHOULD CONSOLIDATE ALL OF THE GROUP’S ASSETS INTO A SINGLE PUBLICLY-LISTED COMPANY OR REMAIN A TWO-TIERED STRUCTURE? To be able to argue whether the Baosteel Group should consolidate the entire Group’s assets into a single publicly-listed company or remain a two-tiered structure one first needs to review the underlying situation, Baosteel was faced with. In order to stay competitive on the increasingly...
    329 Words | 1 Page
  • Low Profits for Established Steel-Makers: Strong Unions, High Wage Rates and Inflexible Work Rules
    commodity type input, could easily switch demand from company to company, and they used this leverage to further bargain down prices. To make matters worse, established steel makers were typically unionized, and a combination of high wage rates and inflexible work rules raised labor costs, making it even more difficult to make a profit in this brutally competitive industry. Strong unions, together with the costs of closing a plant, were also an impediment to reducing excess capacity in...
    1,244 Words | 5 Pages
  • Andrew Carnegie. Opinion Essay
    There are mixed opinions on Andrew Carnegie. What would make him a hero? Andrew Carnegie was a man who became a millionaire. He started working at 12 due to his poor family and slowly rose to riches. He grew up in Pittsburgh near family; he then later was the supervisor of Pennsylvania’s Western Division. In 1861 he was asked to help with troop transportation in D.C. He then moved to New York City, NY, and that was where he primarily live till he died. He was born in 1835, sailed to America in...
    595 Words | 2 Pages
  • The Comlete Steel Making - 1313 Words
    The Complete Steel Making Process Steel Plant 1. The Scrap to Steel Billet Process How we make our steel is a real kiwi recycling success story. The following outline is to help you to understand the scrap to steel making part of our business. All our scrap is sourced locally and is sorted and shredded on our behalf by Sims Pacific Metals – conveniently located next door to us, their biggest customer. The scrap is placed in piles in our yard, depending on its grade and size. The scrap is...
    1,313 Words | 4 Pages
  • Steel Industry - 85811 Words
    85,811 Words | 275 Pages
  • Continuous Process Improvement - 1947 Words
    Introduction The steel manufacturing company Corus focuses on meeting the needs of its worldwide customers and providing innovative solutions. It manufactures, processes and distributes steel and aluminium products worldwide. Corus is a subsidiary of Tata Steel, part of the giant Indian conglomerate. Corus is a subsidiary of Tata Steel, part of the giant Indian conglomerate. Tata Group includes businesses in many industries - for example, chemicals, automotive, telecommunications, leisure...
    1,947 Words | 6 Pages
  • B2B Limestone - 361 Words
    B2B Marketing GROUP – 5 AMANJOT BABRAH DEEPINDER SINGH PRABHJIT SINGH PAHWA RAHUL MATHUR SUDARSHAN IYER PRODUCT - LIMESTONE  Limestone is the most used rock in the world  Average usage is 3.5 tonnes per year per person Limestone – CaCO3 Not impressed ! Give us five minutes ! INDUSTRY  Construction and glass  Agriculture  Cosmetics, health care and pharmaceuticals  Edible products  Printing and paint  Mining and iron smelting  Rubber and adhesives Lets...
    361 Words | 5 Pages
  • Business Poli - 413 Words
    ------------------------------------------------- BUSINESS POLICY ASSIGNMENT GEETANJALI GULATI --50060 GUNJAN NAGDEV --50064 HULLAS ARORA --50069 Pulkit bakshI --50122 GEETANJALI GULATI --50060 GUNJAN NAGDEV --50064 HULLAS ARORA --50069 Pulkit bakshI --50122 Answer1) Threat of new Entrants is high as with the introduction of mini mill technology, smaller setups would be possible. Although steel industry is a capital...
    413 Words | 2 Pages
  • Comparison Between Electric Arc Furnace and Blast Furnaces
    money section • Saving & Spending • Real Estate • Careers • Your Business • Insurance • Retirement • More eHow o Login o Ideafeed o Project Help o Spark Featured: What Are Allergies? Grilling Guide 1. eHow 2. Business 3. Business & the Environment 4. Electricity 5. How Do I Compare Electric Arc Furnaces and Blast Furnaces? How Do I Compare Electric Arc Furnaces and Blast Furnaces? By Helen Akers, eHow Contributor Electric arc and blast furnaces create high...
    1,371 Words | 7 Pages
  • Project - 23426 Words
    A STUDY ON DISTRIBUTION LOGISTICS IN VISAKHAPATNAM STEEL PLANT A Project submitted in the partial fulfillment of the requirement for the award of the degree of MASTER OF BUSINESS ADMINISTRATION IN ANDHRA LOYOLA INSTITUTE OF ENGINEERING AND TECHNOLOGY Submitted By GOGUSETTI VIJAY (11HP1E0058) Under the Guidance of Mr. O.V.KISHORE Sr. Manager, Marketing Facilitated by HRD group Shri .O.R.M RAO (A.G.M, HRD) Shri....
    23,426 Words | 86 Pages
  • Nucor at a Crossroads - 2758 Words
    Nucor at a Crossroads On December 7, 1986, F. Kenneth Iverson, chairman and chief executive officer (CEO) of Nucor Corporation, awaited a delegation from SMS . Iverson had to decide whether to commit Nucor to a new steel mill that would commercialize thin-slab casting technology developed by SMS. Preliminary estimates indicated that the mill would cost $280, and that start-up expenses and working capital of $30 million each would push the total cost to $340 million. Successful...
    2,758 Words | 8 Pages
  • Case 4 - 497 Words
    Using the information contained in the case, conduct a five-forces analysis of the U.S. Steel industry. What conclusion can you draw from this? 1. The risk of entry by potential competitors: High a. Capital Requirement: Steel industry is a capital intensive business. b. Economies of scale: Research and Development expenses and better bargaining power while sourcing raw materials. It may be noted that those steel companies, which are integrated, have their own mines for...
    497 Words | 2 Pages
  • Study on Recruitment and Selection Process
    A Project On ³A STUDY ON RECRUITMENT AND SELECTION PROCESS ³ IN VISAKHAPATNAM STEEL PLANT With reference to RASHTRIYA ISPAT NIGAM LIMITED VISAKHAPATNAM Submitted to (MADRAS UNIVERSITY) By K.S.ANURAJ Under the Guidance of (BATTULA.SRINIVAS RAO) Sr.HR MANAGER (personnel) Visakhapatnam steel plant visakhapatnam 1 A Report on RECRUITMENT & SELECTION Submitted by K.S.ANURAJ Under the Guidance of BATTULA.SRINIVAS RAO Sr.HR MANAGER (personnel) Visakhapatnam steel plant...
    18,228 Words | 70 Pages
  • Nucor at a Crossroads - 11800 Words
    Harvard Business School 9-793-039 Rev. January 20, 1998 DO Nucor at a Crossroads On December 7, 1986, F. Kenneth Iverson, chairman and chief executive officer (CEO) of Nucor Corporation, awaited a delegation from SMS Schloemann-Siemag, a leading West German supplier of steelmaking equipment, at his company’s headquarters in Charlotte, North Carolina. Iverson had to decide whether to commit Nucor to a new steel mill that would commercialize thinslab casting technology developed by...
    11,800 Words | 48 Pages
  • Youth: struggles, aspirations, possibilities
    Importance of water use in the steel industry Water’s ever-growing importance in the industrial manufacturing arena has been demonstrated by an increasing concern regarding the sufficiency of both its quantity and quality for use in industrial applications. In general, water is used in steelmaking as a: coolant for equipment, furnaces, and intermediate steel shapes; cleansing agent to remove scale from steel products; source of steam; medium for lubricating oils and cleaning...
    1,132 Words | 5 Pages
  • Working Capital Management at Jindal Steel Works
    SECTION 1 - PROFILE STUDY OF JINDAL STEEL WORKS LTD INDUSTRY PROFILE INTRODUCTION TO STEEL INDUSTRY India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and...
    10,211 Words | 42 Pages
  • Case Study on Supply Chain Management
    Case 9 Eastern Waves, Inc. Summary Mr. Patton, vice-president of purchasing for Code C, Inc., is concerned about a price increase from a Malaysian supplier. Last summer Code C was celebrating a 60 percent cost reduction based on replacing their major specialty steel supplier with Eastern Waves, in Kuantan, Malaysia. Eastern Waves is a small steel manufacturing company in Malaysia. It has several plants in Malaysia and China and produces various downstream steel products such as angle...
    934 Words | 4 Pages
  • cases of lahore - 1709 Words
    STATEMENT OF COMPLAINANT CASES OF DISTRICT LAHORE, INITIATED IN ENVIRONMENTAL TRIBUNAL, LAHORE FROM JANUARY, 2006 TO JULY, 2008 1. Director General, EPA V/S M/s Abdul Hafeez Re-Rolling Mills, Khokhar Road, Badami Bagh, Lahore. P&C/North Lahore 28-02-2006 F-528/LS/EPA/2006 Pending at evidence stage. 2. Director General, EPA V/S M/s Irfan Steel Re-Rolling Mills, Khokhar Road, Badami Bagh, Lahore. P&C/North Lahore 28-02-2006 F-525/LS/EPA/2006 Pending at evidence...
    1,709 Words | 12 Pages
  • Customer Relationship Management - 15601 Words
     A STUDY ON CUSTOMER RELATIONSHIP MANAGEMENT RASTRIYA ISPAT NIGAM LIMITED VISAKHAPATNAM A project Report submitted for the partial fulfillment of the requirements for the award of “Master of business and administration” BY B. Naga Durgarao Reg no. 12H41E0013 ---------------- Under the guidance of Mr. M. Vijay kumar Sr. Manager (Marketing) FACILIATED...
    15,601 Words | 68 Pages
     REPORT ON ACCOUNT RECEIVABLE MANAGEMENT TATA STEEL Prepared by www.AssignmentPoint.com Date: 21-05-202 EXECUTIVE SUMMARY The project deals in “account receivable management at Tata Steel”. Receivable management is one of the most important aspects of the organization, as it deals with the management of the outstanding. The profit of the company mainly depends on the accounts receivables. Therefore it needs a careful analysis and proper management. Debtors occupy an...
    3,656 Words | 19 Pages
  • Case Study #3: Conducting International Business in an Ethical Manner
    Global Business Environment Case Study #3: Conducting International Business in an Ethical Manner A company that cares Founded ninety years ago in the US, Panting Steel Inc. is a highly profitable scrap metal company. The firm purchases scrap metal from sites across the US and Europe and recycles it to produce finished steel products that it resells to steel mills. A major part of its operations involves dismantling used automobiles. It sells the reusable car parts at low cost to...
    785 Words | 3 Pages
  • Case Study on Nucor Corp
    Case 2: Nucor Corporation: Competing Against Low-cost Steel Imports The Company, Nucor Corporation, started its operation in nuclear instrument and electronics business in early 1950s to early 1960s. Facing bankruptcy, the board of directors opted for a new leadership and appointed Kenneth Iverson as president and CEO. He concluded that to be able to avert bankruptcy is to exit the nuclear instrument and electronics business and rebuild the company around its subsidiary, Vulcraft, which is...
    856 Words | 3 Pages
  • Productions and Operations Management - 1218 Words
    * CASE STUDY * PLANT LOCATION PROBLEMS * During 1970 government of india decided to expand the steel production under public sector units (psu). Three locations were selected to set up the plant. 1. Vijayanagar steel plant in bellary Karnataka. 2. Salam steel plant in TN. 3. Vizag steel plant in AP. * A panel of eminent personalities was formed to analyze the locations. * The important raw materials for steel are : 1. Iron ore : should contain atleast 60% of...
    1,218 Words | 4 Pages
  • Early Management Failures of Bethlehem Steel
    Early Management Failures of Bethlehem Steel LDR/531 October 8, 2012 Early Management Failures of Bethlehem Steel Bethlehem Steel was the largest steel builder that begin in the 1900s building bridges in the United States and 1,127 ships during World War II; however with this early onset of success there were signs of potential failures that management ignored eventually leading to the organization’s own self destruction (Loomis, 2004). Archived articles of Bethlehem Steel’s mismanagement...
    1,187 Words | 4 Pages
  • Nucor Corporation - 4469 Words
    Week Four 1. Read the following from the textbook and be prepared to discuss in class: Chapter 9: Diversification: Strategies for Managing a Group of Businesses. Chapter 10: Strategy, Ethics, and Social Responsibility. Chapter 11: Building an Organization Capable of Good Strategy Execution. 2. Perform Decision Fifth Round for Year 15 of the Business Strategy Game. 4. Prepare a written case study in APA format on, and be prepared to discuss in class...
    4,469 Words | 14 Pages
  • Nucor Steel Case Study
    Nucor From Wikipedia, the free encyclopedia Nucor Corporation Type Public (NYSE: NUE) S&P 500 Component Industry Steel & Iron Founded 1940 Headquarters Charlotte, North Carolina, USA Key people Daniel R. DiMicco, Chairman, CEO, & President Revenue US$ 11.2 Billion (FY 2009)[1] Net income US$ 293 million (FY 2009)[1] Employees 20,400 (2010) Website www.nucor.com Nucor Corporation (NYSE: NUE), a Fortune 300 company headquartered in Charlotte, North Carolina, is one of the largest...
    2,475 Words | 8 Pages
  • Solution Johannsen Steel Company Case Study
    Internet Case for Chapter 2: Operations Strategy in a Global Environment Johannsen Steel Company Johannsen Steel Company (JSC) was established by three Johannsen brothers in 1928 in Pittsfield, Rhode Island. The brothers began JSC by concentrating on high-quality, high-carbon, high-margin steel wire. Products included "music wire" for instruments such as pianos and violins; copper, tin, and other coated wires; and high tensile-wire for the newly emerging aircraft industry. JSC even pioneered...
    905 Words | 3 Pages
  • Indian Steel Industry - 1226 Words
    Press clippings Indian steel industry plays a significant role in the country’s economic growth. The major contribution directs the attention that steel is having a stronghold in the traditional sectors, such as infrastructure & constructions, automobile, transportation, industrial applications etc. Moreover, steel variant stainless steel is finding innovative applications due to its corrosion resistive property. India is the fifth largest steel producer at the global front and struggling to...
    1,226 Words | 4 Pages
  • Nucor Steel - 720 Words
    I. Porter’s Five Forces Analysis of the Steel Industry & Firm Level capabilities analysis 1. Competition from substitutes Increasing substitutes in the form of plastics, aluminum and advanced composites. 2. Threat of Entry High barriers to entry in the integrated mill segment. However, with the mini-mills, the barriers are being lowered due to lower costs (a tenth of those in the integrated mills per ton of steel produced). 3. Competition from rivals Highly competitive since products...
    720 Words | 3 Pages
  • Ratio Analysis: Visakhapatnam Steel Plant
    A CASE STUDY ON “RATIO ANALYSIS” With reference to VISAKHAPATNAM STEEL PLANT, VISAKHAPATNAM PROJECT REPORT (A Report Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Business Administration in Andhra University) Submitted by S. SUNDARA GAYATHRI MBA (FINANCE) Regd : 07ME10092 Under the guidance of Mr. JAMMAYYA Manager (F&A) ANDHRA UNIVERSITY (2007-2008) CERTIFICATE This is to certify that the Project...
    8,674 Words | 42 Pages
  • Nucor - Porter's 5 Forces
    NUCOR AT A CROSSROADS CASE ANALYSIS NUCOR’S SUSTAINED PERFORMANCE RECORD PORTER’S 5 FORCES ANALYSIS • Supplier Power: With the eventual exit of integrated steel companies from buying scrap, the options available with suppliers to sell, reduced. Nucor started several small plants that were close to suppliers & customers, thereby reducing transportation costs. Also, the sites chosen had inexpensive electricity. Their employee-centric policies resulted in them having lowest attrition...
    2,140 Words | 7 Pages
  • Case CISCO - 9932 Words
    PG0-002 MAY 6, 2011 PANKAJ GHEMAWAT RAVI MADHAVAN Mittal Steel in 2006: Changing the Global Steel Game On January 27, 2006, Laxmi Niwas Mittal (LNM) and his son, Aditya Mittal, Chairman & CEO and CFO respectively of Mittal Steel, prepared for the press conference at which they would announce Mittal Steel’s unsolicited €18.6 billion bid to acquire the European steelmaker Arcelor. Although Mittal Steel had been a prime mover behind the consolidation of the industry—and most...
    9,932 Words | 54 Pages
  • Dafafa - 869 Words
    PESTEL Framework: Government delays in allocating coal blocks for captive consumption by steel manufactures is seriously hurting the competitive edge of Indian steel sector. Delays in allocating iron ore mines as well as approval for mining licenses. No new investment on the ground in the steel sector is happening to add new steel capacities. Delays in land acquisition for greenfield projects. There is thus delay in converting the intent into project on ground especially in the area of...
    869 Words | 3 Pages
  • Nucor Case Study - 1312 Words
    NUCOR (25 Points) 1. List and elaborate some strategic issues facing NUCOR? Nucor has been facing many industry challenges including the overall development of the industry. They are competing with foreign firms on cost and efficiency. Nucor has a low cost strategy because as they say their product is not necessarily very attractive. It does not have attractive or unique selling features other than its cost. The commodity of steel is in a very competitive market. Nucor understands that...
    1,312 Words | 4 Pages
  • Steel Industry - 4808 Words
    Knowledge Series 7 Steel In The Veins Steel is undoubtedly the one metal that has helped build most modern societies — and nations. And, as a nation of 1.3 billion people steps on the threshold of a new era, DhanBank PRU examines the nature of the beast that is the Indian steel industry. Contents Page No 1. 2. Why Steel? First Glance A) Demand Driver B) Pricing Trends C) Raw Material 3. Industry Structure A) B) C) D) E) 4. Major Players SAIL Tata Steel JSW Comparison 3 4 5 5 5 6 6 6 7 7...
    4,808 Words | 17 Pages
  • Customer Loyalty - 1494 Words
    A STUDY ON CUSTOMER LOYALTY ON STAINLESS STEEL WITH REFERENCE TO SALEM STEEL PLANT Customer loyalty can be defines as “customer behavior characterized by a positive buying pattern during an extended period (measured by means of repeat purchase, frequency of purchase, wallet share or other indicators) and driven by a positive attitude towards the company and its products or services” (Looy, Gemmel & Dierdonck, 2003). Statement of the problem: To Study on Customer...
    1,494 Words | 8 Pages
  • Case Study of Jsw Shoppe
    JSW SHOPPE — A UNIQUE DISTRIBUTION MODEL FOR BRANDED STEEL Brief of Case JSW is a manufacturing plant producing steel pipes, bends and sockets and was one of many low-cost steel producers in the world and favored bulk buyers. In April 2007, at Jindal Steel Works Ltd.’s marketing headquarters in Mumbai, the sales and marketing team headed by Jayant Acharya (director marketing), Sharad Mahendra (vice-president) had a debate on how to boost the presence of Jindal Steel Works steel in the market....
    1,911 Words | 6 Pages
  • Nucor Case Analysis - 4046 Words
    Individual Case Analysis BUS490 Comprehensive Examination Nucor Steel Corporation Written by: Lukas Kubilius Professors: Bonnie J. Straight Julian J. Prewitt Lithuania Christian College 2 March 2005 Overview of situation Nucor Corporation with 24 plants/divisions and 8,000 employees, operated in nine states recycling more than 10 million tons of scrap steel annually. Producing carboy and alloy steel in...
    4,046 Words | 14 Pages
  • nucor steal case - 2278 Words
    Can our final statement be something like this: “Based on our analysis, Nucor is operating in a highly competitive environment, characterized by high intensity of rivalry among firms. In spite of that, based on their technology, innovation capability, the human capital and the entire culture of the organisation, we predict a bright future for the company!” please say yes... cause i love it. Espen 1. Evaluate the competitive environment in which Nucor operates. Based on our analysis,...
    2,278 Words | 9 Pages
  • TATA history - 786 Words
    Tata Steel: A Legacy and Competitive Edge The foundation of steel production in India was set by Jamestji Nusserwanji Tata when India’s first steel plant was registered as The Tata Iron and Steel Company Limited in 1907.[1] Soon the company diversified from rails and embarked on a journey, capitalizing on the unmet need of steel in India in an industry monopolized by it. Post-independence Tata steel completed its expansion of capacity to produce 2 Mn tonnes of ingot steel every year, making it...
    786 Words | 3 Pages
  • Essays - 984 Words
    The Industrialists and Growth Settled in a vast country with abundant natural resources, Americans soon developed a sense for industry which was characteristic of the 19th century. Unlike Europe where the craftsmen guilds long opposed progress in manufacturing, America was eager to use new technologies that would save labor, which was scarce. Thus the young nation, once freed from Colonial restrictions, progressed faster than its former mother country and eventually emerged as the foremost...
    984 Words | 3 Pages
  • Nucor Corporation in 2001: Pursuing Growth in a Troubled Steel Industry
    Nucor Corporation in 2001: Pursuing Growth in a Troubled Steel Industry Table of Contents Introduction 3 Nucor's History 3 Current Strategy and Future Expectation 4 Analysis and evaluation 4 Dominant Economic Characteristics of the Steel Industry Environment 4 Competition analysis in the Steel Industry 5 SWOT Analysis 6 Recommendations 9 Introduction Nucor's History Nucor Corporation is the second-largest steel producer in the United States and has had net sales of $4.6...
    1,908 Words | 6 Pages