Electric current Essays & Research Papers

Best Electric current Essays

  • Electric Current - 746 Words
    Name _____________________ Battery, resistance, and current – Lab 17 Go to http://phet.colorado.edu/en/simulation/battery-resistor-circuit and click on Run Now. Batteries, Resistance and Current “Battery-Resistor”: Check “show battery” and “show cores”, watch what happens, adjust some variables 1. Why do electrons (blue dots) move? Draw a diagram of the battery, label the flow of electrons. The flow of current (+) is opposite; draw this and note if toward or away from +...
    746 Words | 3 Pages
  • Electric Current and Current Flow
    GRADE: 8th TEACHER: Mrs. Russo I. Statement of Purpose and Hypothesis: Our purpose for this project was to find out what fruits and vegetables could generate an electric charge. We also wanted to find out which ones had the greatest and least charge. Our hypothesis stated that the potato would have the greatest...
    437 Words | 3 Pages
  • Electric Current and Resistance - 722 Words
    Batteries, Resistance and Current “Battery-Resistor”: Check “show battery” and “show cores”, watch what happens, adjust some variables 1. Why do electrons (blue dots) move? Draw a diagram of the battery, label the flow of electrons. The flow of current (+) is opposite; draw this and note if toward or away from + terminal of the battery. The electrons move because of the battery voltage. The current flows in the opposing direction of the electrons and the electrons flow towards the...
    722 Words | 4 Pages
  • Electric Current and Portable Electricity
    Electricity has had a huge impact on our lives since the day it was discovered. It has changed the way we do everything. Electricity is used today with everything, just think about how many things you use everyday that need electricity. Everything that being used in todays world is electricity from an iphone to the internet to a tv. There is a statement out there that says if all the worlds electricity was turned off for 24 hours the whole world would fall apart. This is true, for about 95% of...
    381 Words | 2 Pages
  • All Electric current Essays

  • Magnetic Effects of Electric Current
    Magnetic effect of electric current is one of the major effects of electric current in use, without the applications of which we cannot have motors in the existing world. A current carrying conductor creates a magnetic field around it, which can be comprehended by using magnetic lines of force or magnetic field lines. The nature of the magnetic field lines around a straight current carrying conductor is concentric circles with centre at the axis of the conductor. The direction of the magnetic...
    1,420 Words | 4 Pages
  • Electric Current and High Resistance
    Answers to Questions 1. Is it desirable for an ammeter to have a high resistance or low resistance? Why? ➢ Yes, it is desirable for an ammeter to have a high resistance or low resistance because the lower the resistance, the better the ammeter as it is connected in series and so its resistance will affect the current flow and thereby affect any calculations to be obtained. 2. An ammeter of resistance Ra is connected through a rheostat to a cell of negligible internal...
    297 Words | 2 Pages
  • Electric Currents Review - 1625 Words
    Name ________________________ Date ___________ Block ___ Electric Currents Review 1) When work is done on a positive test charge to move it from one location to another, potential energy ______________ (increases, decreases) and electric potential _____________________ (increases, decreases). 2) When a positive test charge naturally moves from one location to another (without the exertion of a non-conservative force), potential energy _________________ (increases, decreases) and electric...
    1,625 Words | 7 Pages
  • Resistance: Electric Current and Potential Difference
    What happens to resistance of a conductor when its area of cross-section is increased? Ans. Resistance decreases Question 2 The charge possessed by an electron is 1.6x10-19 coulombs. Find the number of electrons that will flow per second to constitute a current of 1 ampere. Ans. Question 3 Name the instrument used to measure electric current in a circuit. Ans. Ammeter Question 4 In the following table the values of current I flowing in a given resistor for the...
    914 Words | 5 Pages
  • Electricity: Electric Current and New Resistance
    COMMON MISTAKES AND HOW TO AVOID THEM Phy X: ELECTRICITY 1. Topic Direction of flow of current. Common slips made Confusion between direction of flow of current and direction of movement of electrons Confusion in use of symbols- Is ampere written as A or amp. V=W/Q is often remembered wrongly. In questions where you have to check the resistance from the graph see what is plotted along the x and y axis. Reason why alloys are used to make elements of electric irons and heaters is not...
    789 Words | 3 Pages
  • Lab 3 A Model For Circuits I Electric Current Prelab
    Name: Aaron Banks Section: Thursday PRELAB: A MODEL FOR CIRCUITS I: ELECTRIC CURRENT 1. What do you predict for the rankings of the brightness of bulbs A, B, and C in Figure 2-1? A>B>C A being the brightest 2. How do you predict that changing the direction of the current by reversing the connections to the battery in Figure 2-1 would change the rankings in (1)? I don’t think it will change at all. The brightness should be the same in diagram b and diagram a it should also...
    270 Words | 2 Pages
  • Electric Shock - 7146 Words
    Electric Shock Anyone What Is This Module About? Nowadays, electrical appliances are commonly seen in every household. In your home, you probably have a television set, a radio, a karaoke player, a VCD player and other electrical appliances. But have you ever wondered how these appliances work? All of these need electricity to work. In this module, you will be introduced to the basic concepts of electricity. You will also learn about its uses. After going through the module, you should be...
    7,146 Words | 29 Pages
  • Electric circuit - 877 Words
    Aim: To design a simple electrical circuit for Doctor's Surgery to let people know when to enter and also to research and learn more about parallel and series circuits. Introduction I am going to design an electric circuit for a Doctor's surgery. There are two types of circuit's Parallel circuit, and Series circuit. First I am going to explain what a circuit is and what the differences they have are. An electric current is a flow of charge. The charges are given energy and made of flow...
    877 Words | 4 Pages
  • Current Balance - 775 Words
    Current Balance PHY 114 10/29/2013 Abstract: The purpose of this experiment was to understand the current balance, current balance is an apparatus that allows measurement of the small force between two current carrying conductors. It consists of two parallel horizontal bars, which are connected in series. The current flows in opposite directions in the two conductors so there is a repulsive force between them, by Newton’s third law there are equal and opposite forces on both wires. In...
    775 Words | 3 Pages
  • Resistance and Electric Circuits - 714 Words
    | Resistance and Electric Circuits | Lab 5 | | | The goal of the “Resistance and Electric Circuit” Lab was to determine the resistivity of a conducting wire given two known resistors. The main property of resistivity is that it represents how easily electrons can flow through a material. A Galvanometer is used to measure the current of the circuit and the Wheatstone Bridge is used to measure the resistances and determine the unknown resistance. This experiment also relates Ohm’s...
    714 Words | 3 Pages
  • Physics Electric Eels - 1782 Words
    Sakib Khan Electric Eels – Physics The animal that is usually known as electric eel is in fact not really an eel but a freshwater species related more to the carp family or catfish family. These unique freshwater predators got their name from the immense electrical charge that they can easily generate to stun or even kill their preys and dissuade predators. Electric eels can grow extremely large which usually can reach as high as 8 foot long and weigh a great amount of 45lbs. In addition to...
    1,782 Words | 5 Pages
  • Current Electricity Term Paper
    Current electricity: 1) Give an equation to calculate resistance. 2) Give the meaning and the unit of each symbol. 3) Complete the following table Resistance (Ω) | Current strength (A) | Potential difference (v) | | 12 | 38 | | 0.4 | 32 | 75 | 96 | | 36 | 15 | | 75 | | 0.25 | 135 | | 27 | 4) An electric frying pan is connected to a 220V power point. If the current in the element is 12 A, calculate the resistance of the element 5) What will the...
    814 Words | 7 Pages
  • Current Transformers Coursework - 671 Words
    Observation Sheet Secondary resistance measurement Protection CT secondary resistance = 0.3 Ω Measuring CT secondary resistance = 0.4 Ω Polarity check Primary current flow is from P2 → P1 Secondary current flow when, Switch ON S2 → S1 Switch OFF S1 → S2 Ratio check Protection CT secondary current = 0.6 A Measuring CT B secondary current = 0.57 A Magnetizing Curve Measuring CT Secondary voltage(V) | Secondary current(A) | 6 | 0.1 | 7.04 | 0.23 | 9.06 | 0.98 | 11.08...
    671 Words | 4 Pages
  • Eddy Current Braking System
    International Journal of Applied Engineering and Technology ISSN: 2277-212X (Online) An Online International Journal Available at http://www.cibtech.org/jet.htm 2011 Vol. 1 (1) January-April/ pp104-113/Tripathi and Raj. Research Article EDDY CURRENT BRAKING EMBEDDED SYSTEM *Virendra Kumar Maurya1, Rituraj Jalan1, H. P. Agarwal1, S. H. Abdi2, Dharmendra Pal2, G. Tripathi2 and S. Jagan Raj3 1 Department of Electrical Engineering, Shekhawati Engineering College, Dundlod, Rajasthan, India 2...
    4,993 Words | 15 Pages
  • voltage and current law - 631 Words
    Passive Electronic Components and Circuits Laboratory 5 Kirchhoff’s voltage and current laws Objective: o Kirchhoff’s voltage law (KVL), o Kirchhoff’s current law (KCL), o Verify Kirchhoff’s voltage and current laws using a given circuit. Equipment: o Digilent Electronics Explorer Board, o Digital Multi-Meter, o Assorted resistors. Theoretical support: o Laboratory 3, o Laboratory 4, o Lecture 4 (Microsoft Power Point Support):  Kirchhoff’s laws,  Applying Kirchhoff’s laws....
    631 Words | 5 Pages
  • Eddy Current: Amperage - 1200 Words
    Eddy Current 1. The principles of eddy current testing depend on the process of electromagnetic induction. 2. This process includes a test coil through which vary or alternating current (AC) is passed. 3. A varying current flowing in a test coil produces a varying electromagnetic field around the coil, As shown in this diagram Amperage * # of coils= strength of magnetic field 4. The electromagnetic field produced around the coils is directly...
    1,200 Words | 5 Pages
  • Test Question Paper on Electric Circuits
    First Summative Test in Science 5 - 3rd Grading Period Name_____________________________________________________Dat e__________________________ Teacher____________________________________________________G r.& Sec._____________________ I. Encircle the letter of the correct answer. 1. Which of these is a source of electrical energy? a. battery b. light bulb c. switch 2. Which of these controls the flow of electric current? a. battery b. light bulb c. switch 3. How does the...
    397 Words | 2 Pages
  • Electric Charge and Public Electricity Supply
    Every single day we use electricity to make the things around us work. From the tape player to the electric pumps that send hot water to each of our homes everyday. Without electricity the lights go off, water is not heated, the television goes off, and outside the traffic lights do not work and as a result the city is immediately congested with traffic jams and choke ups in the street. Without that electricity we have everyday the basic things we use do not function. The book I chose to...
    761 Words | 3 Pages
  • Electricity, Magnetism and My Electric Motor!
    Electricity, Magnetism, and My Electric Motor! The objects around us contain billions and billions of atoms, and each atom contains many protons and electrons. The protons are located in the center of the atom, concentrated in a small area called the nucleus. The electrons travel around the nucleus in orbitals. The protons are trapped inside the nucleus and can't get out. As a result, it is moving electrons that are primarily responsible for electricity. Electricity is related...
    709 Words | 2 Pages
  • Current, Voltage, Resistance and Ohms Law
    Current is a flow of electrical charge carriers, usually electrons or electron-deficient atoms. The common symbol for current is the uppercase letter I. The standard unit is the ampere, symbolized by A. One ampere of current represents one coulomb of electrical charge (6.24 x 1018 charge carriers) moving past a specific point in one second. Physicists consider current to flow from relatively positive points to relatively negative points; this is called conventional current or Franklin current....
    1,011 Words | 3 Pages
  • Prepaid Retail Electric Service Sample Survey Questionaire
    SURVEY QUESTIONAIRE Topic: PERCEPTION OF PREPAID ELECTRIC METERING SYSTEM OF LAOAG CITY RESIDENTS Name: _______________________________________Age: ____ Status: ( ) Single ( ) Married Address: _____________________________________________ Gender: ( ) Male ( ) Female Please answer the following questions: 1. Are you aware about the prepaid electrical metering system? Why? ( ) Yes ( ) No...
    272 Words | 2 Pages
  • Cause and Effects of Electric Shock to a Human Body
    Chapter I Introduction Background of the Study Did you know that all of us are exposed to the risk of electric shock? We are all surrounded by electrical appliances and machinery which exposed us to risk. This study allows us to know the basic information, the causes and effects, and the preventive measure because according to the National Safety Council there are about 600 to 1000 people die every year from electrocution. It continues to rank as the fourth highest cause of industrial...
    1,890 Words | 5 Pages
  • Current and Resistance of a Wire and the Affects When the Length Changes
    Current and Resistance Physics Investigation Aim: Investigate how the length of a wire affects the current and resistance of a wire. Prediction and Hypothesis: I think as you increase the length of the Constatan wire, you also increase the amount of resistance. The current is the flow of electrons; the current is dependent on the amount of voltage, which is applied. Voltage is the push given to the current. The current has to go through a circuit, which contains resistance so if you...
    806 Words | 8 Pages
  • What Factors Affect the Current Flowing Through a Wire?
    I am going to investigate how the resistance of the wire affects a current flowing through a wire. I know that as resistance changes, current changes, as Ohm's law: I = V/R. If one part of an equation changes, the equal must be done to the opposite side. To detect how resistance affects current, I must first discover what factors affect resistance. These factors are: · Length of the wire – if a wire is longer; there are more particles for electrons to move through, and therefore more...
    953 Words | 3 Pages
  • Force Between 2 Parralel Current Carrying Conductors
    The Force Between Two Parallel Current Carrying Conductors Aim: To observe the direction of the forces between two parallel CCDs. Hypothesis: That the CCD with current flow in the same direction will be attracted to each other and CCDs with current flow in opposite directions will repel. Apparatus: -Variable DC power supply * Variable resistor (15ohm rheostat) * Connecting wires * Retort stand * Clamp * Two pieces of thick card or balsa wood 10cmx10cm * Two strips...
    374 Words | 2 Pages
  • Practical Applications of Heating Effects of Elecrtict Current
    The flowing of current through conductor produce heat. We are using this heat due to flow of current in our daily life as in electric iron, electric bulb, electric fuse, electric heater and more. Heating effect of electric current are below (i) Electric iron: In an iron the upper part is grooved. In this groove a coil is placed. Mica as an insulator is placed between the metal part and the coil, so that there is no electrical connection between them. Mica is a bad conductor of electricity but...
    364 Words | 1 Page
  • Magnetic Induction of a Current-Carrying Long Straight Wire Magnetic Induction of a Current-Carrying Long Straight Wire
    a) Derive an expression for the magnetic field B at a point of distance r, from an infinitely long wire that carries a current I. Your derivation should include the direction of the magnetic field with respect to the direction of current flow. Verify your expression by using the experimental results obtained. If your results do not show the expected relationship, explain why. In order to derive an expression for the magnetic field B at a point of distance r, from an infinitely long wire that...
    376 Words | 2 Pages
  • Planning & Designing Experiment: Investigating the current - potential difference relationship (IV Characteristics) for a metal wire.
    Title: Investigating the current - potential difference relationship for a metal wire. Aim: To design an experiment that will facilitate an I - V Graph to be ascertained of a metal wire and thus find the resistance of the wire by deriving the inverse of the gradient of the graph. Skill: Planning & Designing Theory: Resistance is a property of any object or substance to resist or oppose the flow of an electrical current. The quantity of resistance in an electric circuit determines the amount of...
    1,264 Words | 3 Pages
  • Resistance of a Wire Coursework - 1528 Words
    The problem with using resistance as a measurement is that it depends not only on the material out of which the wire is made, but also the geometry of the wire. If we were to increase the length of wire, for example, the measured resistance would increase. Also, if we were to decrease the diameter of the wire, the measured resistance would increase. We want to define a property that describes a material's ability to transmit electrical current that is independent of the geometrical factors....
    1,528 Words | 4 Pages
  • Does Electricity Move Better Through Thick Wires or Thin Ones
    My research is to determine if electricity moves better through thick wires or through thin wires. For this experiment I used two size D batteries, two flashlight bulbs, one 6.5 inch thin steel wool piece, one 6.5 inch thick steel wool piece, two 2 inch pieces of straw, and some electrical tape. Steel wool is a material made from thin fibers of steel made into a pad. (http://www.wisegeek.com/l-what-is-steel-wool.htm) There are many uses for steel wool. It can be used for sanding furniture,...
    448 Words | 2 Pages
  • OHMS LAW - 571 Words
    Study about Ohm's Law: • To verify Ohm’s Law by calculating voltage, current and resistance based on different views of Ohm’s law as well as measuring those values to compare the theoretical results with the actual results. • To verify the relationships of R-I, V-I and R-V given ohm’s law by increasing one parameter while holding the other parameter constant, then measuring and calculating equivalent results of the third parameter. What is Ohm's Law: Ohm's Law is made from 3 mathematical...
    571 Words | 3 Pages
  • Science Practical - 539 Words
    Science practical report (The relationship between voltage and Current) Aim: To find out how current, voltage and résistance in a electric circuit are related. Hypothesis The reading for both voltmeter and ammeter will have complete different results in relationship to the resistor, voltage and current. That voltmeter will have a higher reading than ammeter. Materials * Power pack * Piece of nidrome * 50 cm long or a resistor * Hear proof mat * 6 connecting wires...
    539 Words | 3 Pages
  • Conductor Investigation - 1053 Words
    Science February 6 2009 - February 19 2009 Conductor Investigation Calvin Chang 8.2 Stage 1: Planning the Experiment Introduction ! By “electric current”, I mean by the rate at which electric charges moves through a circuit, the electric charges can either be ions or electrons. They are measured in ammeters and the unit that is measured in is ampere which is the number of charges that passes through per second. There are many factors which would affect the electric current, like the voltage...
    1,053 Words | 3 Pages
  • Reverse Engineering Paper - 2103 Words
    For our project we decided to disassemble and understand a Memphis 1 Channel Mono Block Amplifier. First we started by disassembling the amp down to the main circuit board. From there we assigned ourselves different components to understand what they were and how they worked inside the amp. We all researched our components and got back together to discuss and figure out the flow of power and operations of the amp worked. A general idea of what the amp does is as follows. Power comes into the...
    2,103 Words | 6 Pages
  • Essay - 463 Words
    I plan to pursue a degree in Computer Engineering with an emphasis in technology engineering. I have been interested in this field from the time I work fixing my brothers bikes and mine and, most recently days helping my father after school. Just working with my hands is something that gets my attention and enjoy many new things. This is why I believe that computer engineering is the right career for my future. Ever since I was in seventh grade electronics has been one of my favorite subjects....
    463 Words | 2 Pages
  • The Starting and Operation of China Jaw Crusher Is Very Important
    The Starting and Operation of china Jaw Crusher is very important The correct starting and operation of china jaw crusher has great influences on making sure that the crushing equipment has the best working performance, and incorrect operation or the mistaken operation is often the main reason for the breakdown of the crushing machine. In addition, correct starting and operation of a crusher is conducive to improving the production capacity of the crushing equipment, for this reason, it is...
    347 Words | 1 Page
  • An Investigation Into Electrical Resistance
    Background Knowledge Resistance, in electricity, is a property of any object or substance to resist the flow of an electrical current. The quantity of resistance in an electric circuit determines the amount of current flowing in the circuit for any given voltage applied to the circuit. The resistance of an object is determined by the nature of the substance of which it is composed, its resistivity, accounting for its dimensions and its temperature. Resistivity is expressed in terms of...
    1,182 Words | 4 Pages
  • Hai by the Water 345 - 634 Words
    Chapter 3: Current and Resistance Quick Quizzes - QUESTIONS 1. Consider positive and negative charges moving horizontally through the four regions in Figure 17.2. Rank the magnitudes of the currents in these four regions from lowest to highest. (Ia is the current in Figure 17.2a, Ib the current in Figure 17.2b, etc.) (a) Id , Ia , Ic , Ib (b) Ia , Ic , Ib , Id (c) Ic , Ia , Id , Ib (d) Id , Ib , Ic , Ia (e) Ia , Ib , Ic , Id (f) none of these [pic] Figure 17.2 2. Suppose a...
    634 Words | 3 Pages
  • How Does the Diameter of a While Affect the Resistance in a Circuit
    How Does The Diameter Of Wire Affect The Resistance In A Circuit? Introduction: Some metals such as copper, silver and gold are very good conductors of electricity. This is because they all have only one electron on the outer shell. This means that they need only a tiny amount of energy in order to allow the electron to move. Non-metals, however, do not have free electrons, so even non-metals that only have one electron on their outer shell can still hold onto them tightly. Aim Of The...
    1,602 Words | 7 Pages
  • Resistance of a Wire - 2028 Words
    Physics Coursework Objective: My objective in this experiment is to investigate one of the factors that affect the resistance of a piece of wire; the one I am investing is the length at constant temperature. My objective in this experiment is to investigate one of the factors that affect the resistance of a piece of wire. The factor I chose was length. Factors: There our four different things that affect the resistance of a wire: 1. The Length – because the wire is thinner than...
    2,028 Words | 6 Pages
  • Voltmeter and Ammeter - 556 Words
    How voltmeter and ammeter work Measuring Voltage Measuring the voltage between two points of an electrical current can be done with an instrument called a voltmeter. One type of voltmeter is a direct-current voltmeter. When taking a voltage reading the instrument is placed across the portion of the circuit that is to be measured. Direct-Current Voltmeter The direct-current voltmeter has a horseshoe shaped magnet, with a semicircular piece of soft iron attached to each end of the magnet. The...
    556 Words | 2 Pages
  • DC Electrical Measurements - 1217 Words
    Ana Patrizzi 02/19/2014 PARTNER: DC Electrical Measurements 1. Purpose: The purpose of this experiment is to learn and be familiar about the methods used in measuring Direct Current quantities as current and voltage and to calculate the resistance. We worked with the essential electrical instruments like the galvanometer, ammeter and voltmeter. 2. THEORY: Electric...
    1,217 Words | 9 Pages
  • Nanogenerators - 4298 Words
    1. INTRODUCTION Nanotechnology is a field whose theme is the control of matter on an atomic and molecular scale, nanotechnology deals with structures of the size 100 nanometers or smaller. Nanotechnology is extremely diverse ranging from novel extensions of conventional device physics. Nanogenerator is a prototype nanometer-scale generator that produces continuous direct-current electricity by harvesting mechanical energy from such environmental sources as ultrasonic waves,...
    4,298 Words | 15 Pages
  • Conductor Investigation Experiment Lab-Report
    Conductor Investigation Experiment LabReport Introduction This experiment is about to test how will the nichrome wire effect the ampere of the electric current. All the possible factor that will effect to the volt of the current • The Length of the wire • The Diameter of the wire • Temperature • Magnetism Aim To determine the effect of the length of the wire on the ampere of the electric current. Hypothesis Nichrome is an alloy(a metal made by combining two or more metallic elements)...
    594 Words | 3 Pages
  • Factors affecting the resistance of a wire
    Factors affecting the resistance of a wire Introduction: Resistance is a force, which opposes the flow of an electric current around a circuit. Resistance is measured in Ohms. George Ohm discovered that a circuit sometimes resists the flow of electricity. He called this 'RESISTANCE.' He even came up with a rule for working out the resistance of a circuit, which was: R= V ÷ I V- Volts I- Current R- Resistance Ohms law says the more resistance means more energy is needed for the current to...
    1,210 Words | 7 Pages
  • Rc Circuits - 875 Words
    RC Circuits •In this presentation, circuits with multiple batteries, resistors and capacitors will be reduced to an equivalent system with a single battery, a single resistor, and a single capacitor. Kirchoff's laws will be stated, and used to find the currents in a circuit. In addition, the equation for the time-constant of an RC circuit will be derived. Ohm's Law  When a battery is connected to a resistor, the battery will cause a current to flow through the resistor. The larger the...
    875 Words | 5 Pages
  • rfffgdgs - 1922 Words
    CBSE Sample Paper-05 (Unsolved) SUMMATIVE ASSESSMENT –I SCIENCE (Theory) Class – X Time allowed: 3 hours Maximum Marks: 90 General Instructions: a) All questions are compulsory. b) The question paper comprises of two sections, A and B. You are to attempt both the sections. c) Questions 1 to 3 in section A are one mark questions. These are to be answered in one word or in one sentence. d) Questions 4 to 6 in section A are two marks questions. These are to be answered in about 30...
    1,922 Words | 10 Pages
  • Physics Ohm Law - 457 Words
    Experiment No: EM-1 Title: Ohm’s Law, Meters, Resistivity I Purpose: The basic of simple electrical circuits and measurements is learned. Also, investigating the dependence of the resistance of a wire on its length, cross-sectional area, and the material of which it is made. By examining electrical resistance (R) through a metal conductor, the voltage (V) and current (I) through the conductor, the following principles will be demonstrated: 1.) Ohm’s Law 2.) Dependence of resistance...
    457 Words | 3 Pages
  • The effect of Length on the overall resistance of a circuit Rachit withcomments
    The effect of Length on the overall resistance of a circuit. Research question: How does the length of the conductive putty affect the over all resistance of a circuit? This experiment will be discussing how the length of the conductive putty wire affects the overall resistance of a circuit. The variables for this experiment are being used for a number of reasons, however one of the main reasons behind choosing this experiment is investing how length of an object is affected be the resistance....
    1,080 Words | 5 Pages
  • Due Process of the Law - 286 Words
    Experiment 3: Oscillators and timers Introduction The NE555 chip which operates at 5v, utilizes two comparators for temperature stability. This chip is capable of producing oscillations. It is made up of 8 pins and its oscillation mode is controlled by two resistors and a capacitor. Each pin is set to perform a function. Pin 1 serves as ground. Pin 2 is the trigger - the input to the lower comparator which sets the latch that causes output to go high. Pin 3 serves as the output....
    286 Words | 1 Page
  • emt1255 experiment #1 - 554 Words
     Linearity and V-I Curves Experiment #1 Name Bikash kc 9/10/2013 1255L Table of Contents Objective: To get familiarize with the meaning of linearity by plotting the V-I (volt-ampere curves) characteristics of a linear device. We will plot the V-I curves of a few resistors to gain experience in plotting, and also to learn what is meant by Linearity. Equipment Low-Voltage dc supply (1-15v) VTVM Milliammeter...
    554 Words | 4 Pages
  • Gsce Physics Coursework - 1140 Words
    GCSE Physics Coursework: PLANNING SECTION: Variables: Controlled variable- What you are keeping the same in your experiment to make it a fair test. In this experiment, I will keep the materials used to make the resistors and the temperatures to carry out the results the same throughout the process of the experiment and I will also keep the same thickness of wire. Independent variable- What you are going to change during the experiment to influence your results until you get an...
    1,140 Words | 4 Pages
  • Common Electrical Devices Used in Physics
    Experiment #7 "Electric Devices and Meters" Physics – PHA202 – PT2E Santos, Nickerson Jeff F. February 27, 2002 0001864 Experiment No. 7 Electric Devices And Meters OBJECTIVE: To familiarize the students with the different types of electric devices and meters. FOREWORD: In order to perform experiments dealing with electric circuits, you must become familiar first with the devices and meters needed for such experiment. Some of the...
    1,851 Words | 8 Pages
  • Physics Resistivity of a Wire - 1959 Words
    AIM- OUR AIM WAS TO FIND OUT WHICH VARIABLES AFFECT RESISTANCE, AND WHICH ONE HAS THE GREATEST EFFECT. BACKGROUND INFORMATION: Resistance is the force that opposes the flow of electrons in a circuit. The equation for resistance is Ω=V/A. (Ohms equals Voltage divided by amps). Resistivity is a measure of how strongly a material opposes the flow of electrical current, There are four main factors that affect resistance: Length – this is because the electrons would bump into more atoms, the...
    1,959 Words | 8 Pages
  • Science Invesstigatory Project - 425 Words
    HUMAN BATTERY OBJECTIVE: The experiment will prove which gender produces the most electric current and in which condition do they have a greater current. The testing is done with two different types of metal plates hooked up to an ammeter. The subject then places his/her hands on the plates which gives the ammeter a reading of how strong the electric current is in the subjects body. Methods/Materials [1] Copper Plate [1] Aluminum Plate [1] Large block of wood [1] Micro Ammeter[x] Human test...
    425 Words | 2 Pages
  • Electrical Apparatus - 531 Words
    familiarization of electrical apparatus. Name Image Symbol Uses of functions Galvanometer A galvanometer is a very sensitive meter which is used to measure tiny currents, usually 1mA or less. Ammeter An ammeter is used to measure current. Voltmeter A voltmeter is used to measure voltage. Resistor (Fixed and Variable) Fixed Variable A resistor restricts the flow of current, for example to limit the current passing through an LED. A resistor is used with a capacitor...
    531 Words | 3 Pages
  • Revison Notes Physics Class 10 Chapter Eletricity
    Grade 10 Electricity I Q t I = current Q = net charge flowing t = time 1A 1C 1s Unit: Q = Coulomb (C) I = Ampere (A) t = Second (s) Potential difference  Work done to move a unit charge from one point to another V W Q Unit  Volt 1 Volt 1 joule 1 coulomb 1V 1J C 1 Ohm’s law Current potential difference V I V = IR (R = resistance) Unit (R)  1 1V 1A (Ohm) Factors on which resistance depends 1. 2. R R l, when A and material constant l = length A, when l and material...
    294 Words | 2 Pages
  • Electrical Technology - 9993 Words
    Table of Contents Objective – Chapter 1 1 1.0 INTRODUCTION TO ELECTRICAL CIRCUITS 2 Basic Quantities and Units in Electrical 2 Quantities 2 Units 3 Factors Affecting Resistance 4 Length of the Conductor: 4 Area of Cross-Section of the Conductor: 4 Electrical Resistivity of Substances 5 Effect of Temperature 5 Components of Electrical Circuits 6 Components of an Electric Circuit 7 Measuring Current, Voltage and Resistance 8 Measuring voltage 8 Measuring current 9...
    9,993 Words | 40 Pages
  • Gumamela - 347 Words
    Voltage, electrical potential difference, or an electric tension (denoted ∆V and measured in units of electric potential: volts, or joules per coulomb) is the electric potential difference between two points, or the difference in electric potential energy of a unit test charge transported between two points.[1 An electronic circuit is composed of individual electronic components, such as resistors,transistors, capacitors, inductors and diodes, connected by conductive wires or traces...
    347 Words | 2 Pages
  • Physics Ib Chapter 4 Notes
    CSimple Harmonic Motion and Waves Kinematics of simple harmonic motion: Oscillation: an effect expressible as a quantity that repeatedly and regularly fluctuates above and below a average value, as the pressure of an alternating current. Examples include: • Cycle: One cycle is defined as one complete oscillation of the pendulum (A-B-A) • Equilibrium Position: the position where the pendulum would be at rest when undisturbed (O) • Amplitude (x0): maximum displacement from...
    829 Words | 3 Pages
  • 08 Making Use Of Electricity
    Living Science (Second Edition) Unit Test 2 8ʳ Making use of electricity S2 Science Test Unit 8ġ Making use of electricity Name:____________________________ ΰʳ ʳ ʳ α Time and Marks Class: ____________________________ Part A: 35 min / 100 marks Date: ____________________________ Parts A & B: 45 min / 120 marks Note: ʳ 1 Attempt ALL questions. 2 Write your answers in the spaces provided on the Answer Sheets. ʳ Part A (Level 1) A True or false questions (5 marks, 1 mark each)...
    1,934 Words | 31 Pages
  • Electricity and Magnetism - 1210 Words
    Electricity and Magnetism Electricity Circuit symbols Potential difference The energy which is delivered to an electric circuit comes from the supply. The greater the potential difference of the power supply the more energy is delivered. Potential difference is measured in volts, which has the unit symbol V. Cells in series The more chemical cells that are connected in series the greater the potential difference that they supply. The potential difference of a number of cells...
    1,210 Words | 6 Pages
  • Resistance of a Wire - 4052 Words
    Introduction The resistance of a wire depends on certain factors. Some of these variables are listed below: • Length of wire • Diameter or thickness of wire • Temperature at which wire is kept • The material of which wire is made out of. • The potential difference or voltage. • Humidity • Cross sectional area. • Voltage across circuit All these factors will have to be kept constant except the diameter of the wire whilst doing the experiment to ensure that the investigation is...
    4,052 Words | 11 Pages
  • Reprocudtive Health Bill - 1286 Words
    Chelsea Samatra, Kenneth Ragus Samatra,Ragus 1 Ms. Daligcon Period 4 A Battery That Makes Cents Abstract Many coins in the pile will make the most electricity. If there are more coins in the pile, then the more electricity it can produce, because the more electrons you have, the more electricity you will get. Batteries are expensive, but you can make one for exactly 24 cents! In this experiment, you will make your own voltaic pile...
    1,286 Words | 5 Pages
  • Physics Ia Design - 469 Words
    Introduction Background Theory The usual equation for measuring electric current flowing through a series is I = V/R. The current flowing in a series is affected by the voltage and the resistor that is also creating the series. Electric current is a flow of electric charge through a conductive medium. These charge is in a form of moving electrons in a wire. The SI unit for electric current is ampere (A) and can be measured by using a device called ammeter. Change in temperature can...
    469 Words | 2 Pages
  • Ch 11 Homework Assignments
    HOMEWORK ASSIGNMENTS 1. CONSIDER A VERTICAL CONTACT BETWEEN TWO GEOLOGIC UNITS OF GREATLY DIFFERENT RESISTIVITIES P1 AND P2 . A. CALCULA TE THE DIRECTION THAT ELECTRICAL CURRENT WILL LEAVE THE BOUNDARY INTO P2 IF IT APPROACHES THE BOUNDARY AT AN ANGLE OF 45° TO THE NORMAL. B. CALCULATE THE ELECTRICAL POTENTIAL AT POINT A FROM A SINGLE SOURGE OF CURRENT ( +I ) A T POINT B. REMEMBER THAT THE BOUNDARY WILL CREATE A REFLECTED IMAGE OF THE CURRENT SOURCE WITH MAGNITUDE KI. FOR P1 = 100 Ωm AND P2 =...
    1,363 Words | 13 Pages
  • Electrical Circuit - 513 Words
    1. Conductor - is a material which contains movable electric charges. In metallic conductors such as copper or aluminum, the movable charged particles are electrons (see electrical conduction). Positive charges may also be mobile, such as the cationic electrolyte(s) of a battery, or the mobile protons of the proton conductor of a fuel cell. In general use, the term "conductor" is interchangeable with "wire. 2. Insulators – are non-conducting materials with few mobile charges and which...
    513 Words | 2 Pages
  • Wind - 2617 Words
    Submitted By A Minor Project Report On “DIGITAL SOIL MOISTURE TEST” In partial fulfillment of requirements for the degree of Bachelor of Technology In Electrical Engineering Guided by Prof. VINEET MEHTA Name of the student: BHOMARAM BHISNOI (10EJIEEOO6) JAGDEV(10EJIEE022)...
    2,617 Words | 10 Pages
  • Sample Paper - 615 Words
    ELECTRICITY (CLASS – X) QUESTIONS FOR PRACTICE 1. State the law that governs the strength of the current passing through a metallic conductor when a p.d is applied across its end. Illustrate this law graphically? 2. Why is an ammeter connected in series and voltmeter in parallel in a circuit? 3. In an experiment the current flowing through a resistor and potential difference across it are measured. The values are given below. Show that these values confirm Ohm’s Law and also find the resistance...
    615 Words | 2 Pages
  • Brandico Barr Module 3
    Brandico Barr Part 1: Answer the following questions (20 points) 1. Name and describe the components needed to make a complete circuit. You would need a bulb(converts electrical energy to radiant energy), a battery(possible power source), a switch(used to connect and disconnect the circuit), a buzzer(converts electrical energy to mechanical energy), a motor(converts electrical energy to mechanical energy), a resistor(slow down electron movement), a voltmeter(measures the voltage) and an...
    608 Words | 3 Pages
  • Resistance in a Conductor - 513 Words
    Resistance in a Conductor: The electrical resistance of an electrical conductor is the opposition to the passage of an electric current through that conductor. Electrical resistance shares some conceptual parallels with the mechanical notion of friction. The SI unit of electrical resistance is the ohm (Ω).An object of uniform cross section has a resistance proportional to its resistivity and length and inversely proportional to its cross-sectional area. All materials show some resistance, except...
    513 Words | 2 Pages
  • Filipino Scientists: Contributions in the Field of Electricity
     Filipino Scientists Contribution in the field of electricity Gregorio Zara Holder of doctorate in physics. Among Filipino Scientists, he is perhaps the most notable in the field of electricity. Zara formulated the Law of electrical resistance or what is known as the Zara Effect. This law states that all moving contacts between conductors produce a resistance to the passage electrical current which may be kinetic or permanent electrical...
    303 Words | 2 Pages
  • Project on Ohms Law - 453 Words
    Ohms law V=i×R Hypothesis Volts equal amps multiplied by resistance. if voltages are kept constant and current is decreased and temperature is kept at a mere 15C and the circuits resistance will increase. In the same way if resistance is increased current strength would decrease accordingly. Can I prove that in circuit volts equal amps multiplied by resistance? Aim To determine the volts in a circuit I will attempt an experiment, to design a circuit where volts are kept constant and...
    453 Words | 3 Pages
  • City and Guilds 2330 Level 2.01 Question Paper and Answers
    ity C&G 2330 202 REVISION QUESTIONS The relationship between the mass of a body (m), the applied force to the body (F) and the acceleration of the body a. is given by the formula: a. Force = mass x acceleration, F = m x a b. mass = Force x acceleration, m = F x a c. acceleration = mass x Force, a = m x F d. acceleration = mass / Force, a = m / F answer: a The SI unit of time is the second. Express 0.00001 seconds in a suitable sub multiple: a. 10 milliseconds, 10 ms b. 100...
    1,234 Words | 7 Pages
  • ECT122 W1 ILab 2
    ECT 122 Week 1 iLab #2 Part 1 1. Calculate the conductance of the following resistors: Note: don’t forget the units! Resistance Conductance 108,342,000 Ω 9.23µS 10 kΩ 100µS 2.2 kΩ 4.55µS 2. Calculate the resistance of a circuit that has the following conductance of. Note: don’t forget the units! Conductance Resistance 25 mS 40Ω 235 nS 4.26MΩ 50 S 20Ω 3. Describe a Conductor. A conductor is made of materials that have...
    302 Words | 2 Pages
  • Electrical Safety - 1096 Words
    Electrical Safety in the Operating Room Perioperative Staff Education 01/04 Winifred Wilt, RN, MSN, CNOR Education  Required by JCAHO  Required during orientation  Annual review required Electrical Hazards  Fires  Burns  Electrical shock  Explosions  Power failure Outcomes  Damage to or malfunction of equipment  Possibility of patient and staff injury, disability, or death Electrical Shock  Shock occurs when a person becomes the final...
    1,096 Words | 11 Pages
  • Cbse Term 1 Question Paper
    Neeru2012-10-23T12:15:00 CLASS 10 ELECTRICITY 1. How much current will an electric heater coil draw from a 220 volt line, if the resistance of the heater coil is 40? (1 Mark) (Ans) Given, R= 40, V=220 V We have the relation, I = V/R = 220/40 = 5.5 A 2. What is electric current? (1 Mark) (Ans) The rate of flow of charge per unit time through a conductor is called electric current. 3. What is the SI unit of electric current? (1 Mark) (Ans) The SI unit of electric current is...
    2,376 Words | 8 Pages
  • Automotive E-Coat Paint Process Simulation Using FEA
    Finite element analysis (FEA) is widely utilized in the automotive industry to study a variety of engineering design activities such as crash test simulations and optimization of manufacturing processes. One of the latest areas to benefit from FEA technology is the E-coat paint process. E-coat paint provides for excellent corrosion resistance and is the first of several different protective paint layers applied to an automotive body. During the E-coat paint process, an entire automotive body is...
    927 Words | 3 Pages
  • Engineering Lab Report - 347 Words
    9/23/12 Lab Report #1 Meter Reading Summary The objective of this experiment was to learn how to read different meters like the D.C. volt meter and the D.C. amperes meter. In all meters each big line is a major division and each little line in between is a minor division, and if there is a line smaller than the minor division lines then that would be a sub minor division. Each meter has a low, medium, and high range. For example on the D.C. volt meter the ranges go from top to bottom 150, 15,...
    347 Words | 1 Page
  • Physics Coursework - 2110 Words
    GCSE Physics Coursework - Resistance of a Wire Coursework Resistance of a Wire Task To investigate how the resistance of a wire is affected by the length of the wire. Theory What is resistance? Electricity is conducted through a conductor, in this case wire, by means of free electrons. The number of free electrons depends on the material and more free electrons means a better conductor, i.e. it has less resistance. For example, gold has more free electrons...
    2,110 Words | 17 Pages
  • Electrolysis - 1156 Words
    Electrolysis of Copper (II) Sulphate By: Celeste Matete Year 10 Electrolysis Electrolysis is a process in which electrolytes are broken down/ decomposed when an electric current passes through them. Electrolytes are substances that ionize when dissolved in solvents like water. Electrolytes include * Acids * Ionic compounds i.e. Bases and salts For example if an electric current is passed through lead bromide, an ionic compound, the substance is decomposed to form lead and...
    1,156 Words | 4 Pages
  • ac ammeters - 776 Words
     A.C current meters Introduction An ammeter is a measuring instrument used to measure the electric current in a circuit. Electric currents are measured in amperes (A), hence the name. Neither type of basic dc PMMC meter movement will correctly indicate an alternating current. There are, however, four basic types of meter movement that will indicate ac values:- Thermocouple Hot wire Electrodynamometer Iron-vane Electrodynamic...
    776 Words | 3 Pages
  • Kirchhoff's Law - 1024 Words
    I. Title: Kirchhoff’s Law II. Objectives: To study the application of Kirchhoff’s Law to a D.C. network by comparing the observed and the computed values of the currents in the circuit. III. Apparatus: Resistance Module, 1pc. Battery of two cells (3 volts), 1pc. Dry cell (1.5 volts), Multitester, 4 pairs connectors IV. Procedure with Experimental Setup: Part A. 1.) The apparatus was arranged as in diagram 1. The switches were left open until it is...
    1,024 Words | 5 Pages
  • Resistivity of Conductive dough - 1026 Words
    Tive dough Background theory An electric circuit is formed when a conductive path is created to allow electron movement. This movement of electrons, carrying an electric charge through a conductive material is called an electric current. Electrons in motion experience collisions with the lattice ions of the conductor which slows their progress. This opposition to the flow of electric current a conductor produces is called its electrical resistance (Walding, 2004). The amount of current in...
    1,026 Words | 4 Pages
  • Electrical Formula - 747 Words
    CHAPTER 1 ELECTRICAL FORMULAS OHM’S LAW/POWER FORMULAS R x I2 E x I P R P E E2 RxI R P I P x R E I P I E R E R P I2 E2 P P = Power = Watts R = Resistance = Ohms I = Current = Amperes E = Force = Volts 1-1 OHM’S LAW DIAGRAM AND FORMULAS E I E = I x R I = E ÷ R R = E ÷ I R Voltage = Current x Resistance Current = Voltage ÷ Resistance Resistance = Voltage ÷ Current POWER DIAGRAM AND FORMULAS P E I = P ÷ E E = P ÷ I P = I x E I Current = Power ÷...
    747 Words | 5 Pages
  • 3 - 764 Words
    Alexandria Hayford Honors Physical Science Instructor Durbin 03/06/15 3.03 Build Your Own Circuit Wokrsheet Part 1: Answer the following questions (20 points) 1. Name and describe the components needed to make a complete circuit. In order to make a complete circuit, you must include a voltage source and an unbroken path. The voltage source is typically a battery, and it is where the electric current is first created by the moving electrons. The unbroken path is generally made out of wire, and...
    764 Words | 3 Pages
  • Lemon as Battery - 447 Words
    It is possible to get electricity from a lemon (and a few other acidic fruits and vegetables) using two strips of metal. The most readily available combination is copper and zinc. The zinc piece can be taken from the casing of an old carbon "D" cell (battery); some zinc coated nails may work as well. The copper can be a coin containing a high amount of copper. (Note: some recent copper coins, including the newer U.S. pennies, contain low amounts of copper mixed with zinc. If in doubt, use a pure...
    447 Words | 2 Pages
  • Resistance in a Wire Coursework - 1526 Words
    Resistance in a Wire Coursework In this investigation we are trying to look for resistance in a piece of wire, and how the length of a wire can increase or decrease the resistance. The things that affect the resistance in a wire are: • the length of the wire • a certain amount of wire • cross sectional area of the wire (thickness) • temperature • material What things can affect the resistance in a wire? The temperature can affect the resistance in a wire, because the more...
    1,526 Words | 6 Pages
  • Wolf Creek Dam - 5685 Words
    The Sustainability of Experience — Investing in the Human Factor 28th Annual USSD Conference Portland, Oregon, April 28 - May 2, 2008 Hosted by Portland General Electric On the Cover Portland General Electric’s North Fork Dam, on the Clackamas River southeast of Portland, is a thin, variable-radius concrete arch dam with a maximum height of 207 feet and a thickness varying from 32 feet at the base to 8 feet at the crest. The spillway is a 200-foot-long gated ogee-type structure...
    5,685 Words | 18 Pages
  • electrical conductors - 2055 Words
    ELECTRICAL CONDUCTORS A conductor is an object or type of material which permits the flow of electric charges in one or more directions. For example, a wire is an electrical conductor that can carry electricity along its length. Physics All conductors contain electrical charges, which will move when an electric potential difference (measured in volts) is applied across separate points on the material. This flow of charge (measured in amperes) is what is meant by electric current. In...
    2,055 Words | 7 Pages
  • Voltage: Ohm's Law and Kirchhoff's Rules
    Voltage: Ohm's Law and Kirchhoff's Rules ABSTRACT Ohm's Law and Kirchhoff's rules is fundamental for the understanding of dc circuit. This experiment proves and show how these rules can be applied to so simple dc circuits. INTRODUCTION In the theory of Ohm's Law, voltage is simply proportional to current as illustrated in the proportionality, V=RI. As shown in this relation, V represent voltage which is the potential difference across the two ends of a electrical conductor and between...
    925 Words | 3 Pages
  • Lab Report Physic - 719 Words
    Post lab 4. If we increase the temperature of a conductor, its resistance will increase. In a semiconductor, resistance will decrease as temperature increases. Read more: http://wiki.answers.com/Q/What_is_the_effect_of_increasing_temperature_on_resistance#ixzz1u3megHV5 1. Resistors Resistors are the most commonly used component in electronics and their purpose is to create specified values of current and voltage in a circuit. A number of different resistors are shown in the photos....
    719 Words | 3 Pages
  • Ohms Law - 345 Words
    Name: _____________________ Wire Resistance and Ohm’s Law PhET MiniLab Introduction: When an electrical potential exists in a circuit, a current may flow. Current is the flow of electrons in a circuit. Resistance in the circuit slows the flow of the electrons, reducing the current in the circuit. We will use the mathematical form of Ohm’s Law frequently when we investigate electric current and circuits later in this unit. • Open the PhET Simulation Electricity, Magnets, and Circuits (...
    345 Words | 2 Pages
  • Lab 10 - 329 Words
    Name: Conductivity Lab Procedure: Go to: http://phet.colorado.edu/simulations/sims.php?sim=Conductivity and click on Run Now Part I—Conductors 1. Check that the battery voltage menu is set to 0 2. Under the materials menu, select metal. What, if anything, happens? 3. Now, set the battery voltage to 0.5. What, if anything, happens? Illustrate with a diagram....
    329 Words | 2 Pages
  • Ampere's Law - 320 Words
    Ampere’s Law Jessica Warfield Partner: Rachel Beckner TA: Joel Mazer March 15, 2012 Conclusion: This experiment clearly demonstrated how Ampere’s Law relates the magnetic field to the current using the relationships stated in the formula B= μ0I2πr. This relationship allowed to the experiment to calculate the value of permeability of free space in order to verify the relationship that is outlined in Ampere’s Law. This lab also allowed us to measure magnetic field strength as a function...
    320 Words | 1 Page
  • Brief History Of Electricity. - 753 Words
    Electricity is important in our everyday lives. It is essential for almost everything in our modern world. The knowledge learned in the past about electricity enabled such things as engines, telephones, radios, computers, and much, much more. As early as 600 B.C., the Greeks were already studying electricity. They noticed that if you rubbed a piece of amber with fur, it had a charge with the ability to attract small objects. Many years later, in the 16th Century, William Gilbert discovered many...
    753 Words | 3 Pages

All Electric current Essays