the ideal gas equation‚ and plugging the slope value from the graph into the Clausius-Claypernon equation‚ enthalpy of vaporization was determined to be 10kJ/mol. The percent error was determined to be 76.0%. Introduction: The purpose of this lab is to investigate vapor pressures and the partial pressure of gas produced from liquids at different temperatures. These pressures vary at different temperatures. In any given liquid there is a vapor that is produced above directly above the liquid
Premium Ideal gas law Gas Pressure
Chemistry 121 Colligative Properties Lab Demonstration of Selected Calculations from Choice I Determination of Kf for Naphthalene To determine the Kf for naphthalene‚ we need to find the difference in the freezing point of pure naphthalene and the solution of 1‚4-dichlorobenzene in naphthalene. Let’s say that we did this experiment‚ used 1.00 g 1‚4-dichlorobenzene in 10.00 g naphthalene‚ and found that the freezing temperature of pure naphthalene was 78.2°C‚ while that of the solution was 75
Premium Chemistry Atom Oxygen
that may expose you to splashes or sprays of blood or body fluids 2. Why should you consider a body fluid capable of infecting you with disease? o I think you should be aware and alert because its precaution to practice when youre working in a lab setting. 3. Describe how to dispose of waste material contaminated with body fluids. o You should dispose all waste material in the correct disposal area‚ and you can throw away the waste materials in the biohazard container. 4. Explain how to
Premium Waste Goggles Blood
Lab #5 Questions and Answers 1. Which tool is better at performing protocol captures and which tool is better at performing protocol analysis? Wireshark is better for performing protocol analysis and Netwitness Investigator is best at performing protocol captures. Wireshark does well at both aspects‚ which makes it a little better. 2. What is promiscuous mode and how does this allow tcpdump‚ Wireshark‚ and NetWitness Investigator to perform protocol capture off a live network? Promiscuous
Premium Transmission Control Protocol Wireshark
Lab 1: Microscopy and the Metric System Part A: 1. List the components of the compound microscope and their function. 2. determine the total magnification given that you are using a compound microscope with the following objectives: 4x‚ 10x‚ 40x‚ and 100x 3. what is meant by the depth of field? 4. what is meant by the field of view? 5. describe the process of making a wet mount. ________________________________________________________________________________ 1. -Focal adjustment; used
Premium Microscope Optics Lens
Lung Capacity in this lab‚ I learned about lung capacity and CO2 production. Lung capacity simply means the maximum amount of air you can take into your lungs. Lung capacity and CO2 production closely relate to the respiratory system. The respiratory system is the system in which oxygen goes into your body and carbon dioxide comes out; In short it’s breathing. The structures involved in the respiratory system are mouth/nose‚ mucus/cilia‚ pharynx‚ larynx‚ bronchi‚ bronchioles‚ alveoli‚ pleura‚ and
Premium Respiratory system Respiratory physiology Oxygen
Determining the Melting Point of a Substance Purpose The purpose of this lab is to determine the melting point of the substances naphthalene‚ biphenyl and a mixture of C. Data/Observation Sample | Melting Point Range (°C) | | Accurate trialStart Done | Naphthalene | 81 | 85 | Biphenyl | 71 | 73 | Mixture C | 42 | 56 | Questions: 1. The effect of the impurity on the mixture caused the melting point of the mixture to be lowered. 2
Free Solid Liquid
the most energy per gram because they are mostly made of sugar and glucose which tends to release high amounts of energy when consumed since they are monosaccharide’s. Materials and Procedure List of materials used: * Safety Goggles * Lab apron * 10 cm by 10 cm piece of cardboard * Aluminum foil * 2 Large paper clips * Tape * Calorimeter (aluminum can‚ paper clips‚ copper string) * Ring stand * Thermometer * Electronic balance * Glass stirring rod
Premium Energy Carbohydrate Thermodynamics
PHY 101 Lab Report Waves Lab Purpose The purpose of this laboratory experiment is to “investigate how the vibrating source affects selected characteristics of the sound produced” (Giancoli‚ 2006). Materials The following materials were used in the completion of this laboratory experiment: * Meter stick * Two paper towel rolls / cardboard tubes * Scissors * Two rubber bands * Wax paper * Transparent tape * Flashlight * Balloon Procedure Part 1:
Premium Sound Wavelength Wave
LAB 1 Background and Hypothesis: I know I haven’t passed the lab 1 H and B but I really do not want to lose points again just for the fact I didn’t get it done in time. I already lost -5 pts and I really don’t want to lose -20 pts. So I am just gonna go on a whim here and just get it done through here so it doesn’t automatically fail me without me at least trying. Background: Test to see if people who are Left Handed would be left thumb dominant and compare to see people who are Right Handed
Premium Scientific method Left-handedness Handedness