Lab 1 – Measurement of Space and Time Anthony Lucci Lab Partner: Amy Hayes Question 4: Both the height and diameter of the cylinder were taken to find the volume; five times for both measurements. Vernier calipers were used to get these measurements by clamping the cylinder between the jaws of the calipers. By looking at the mark of the zero‚ in relation to the main scale‚ the line best lined up with a line from the main scale was taken down. Getting
Premium Measurement Errors and residuals in statistics Volume
Experiment-5 Thermal physics is the combined study of thermodynamics‚ statistical mechanics‚ and kinetic theory. This practical is done to measure the temperature drop of water over a period of time (30 minutes). Research question- What is the rate of temperature change over a period of 30 minutes? Independent variable- time Dependent variable- the temperature of water Controlled variables- the amount of water in the calorimeter - The stop watch
Premium Temperature Thermodynamics
MAPUA INSTITUTE OF TECHNOLOGY DEPARTMENT OF PHYSICS EXPERIMENT 201 WORK‚ ENERGY AND POWER GRADE GRADE Name: CAYETANO‚ Ma. Frederiza Anne M. Program/Year: MSE-2 Course Code/Section: PHY11/B2 Student number: 2010102844 Group number: 2 Date of Performance: July 27‚ 2013 Date of Submission: August 3‚ 2013 Sir Bernard Aguirre Instructor GRAPH AND CALCULATIONS A. PART 1: DETERMINING THE FORCE‚ WORK AND POWER OF THE FAN CART F=wp+wa W=F∙s Pave=Wt where: F = Force of the Fan
Premium Potential energy Force Energy
Grade 11 physics: SPH3U1-01 | Physics Lab Report | Specific Heat Capacity of Brass | | Jin Jin Shi | 2012/12/6 | Instructor: Mr. Nailer | I. Introduction The amount of heat required to raise the temperature of a solid body depends on its change in temperature (ΔT)‚ its mass (m)‚ and an intrinsic characteristic of the material forming the body called specific heat (cp). The heat is calculated from the equation II. Purpose The purpose of this laboratory is to determine
Premium Heat Specific heat capacity Thermodynamics
Kevina Smith Lab 1: Microscopy and the Metric System Part A: Microscopy Purpose The purpose of this experiment was to learn how to use a microscope correctly and perform wet mount slides accurately‚ thus becoming more familiar with the microscope. Hypothesis It would be hard to use the microscope without any kind of previous training and the parts of the microscope and their functions must be learned in order to use it properly. Materials & Methods Materials: 1. Filter
Premium Metric system
Date:2/11/13 | Exp 1: Laboratory Techniques & Measurements | Lab Section: 73426/0 | Data Tables: Length and Measurements Object Measured | Length in cm | Length in mm | Key | 6.4cm | 64mm | Fork | 26.5cm | 265mm | CD | 17cm | 170mm | Warm Temperature Measurements Hot tap water temperature _73___˚C Boiling water temperature _101___˚C Cold Temperature Measurements Cold tap water temperature __15__˚C Ice water temperature __0__˚C Volume Measurements Volume of completely filled small test
Premium Temperature Measurement Units of measurement
April 29‚ 2014 Abstract The objective project was to use our knowledge of physic properties to create a working car that was powered by a mouse trap. I found that the lighter the car was and the more traction the car had‚ the further it travelled. Introduction The purpose of this project was to create a car that is powered by a mouse trap. We were to use our knowledge of physics laws to make the best car we can. I knew from Newton’s Law‚ F=ma‚ that if my car had a lower
Free Force Classical mechanics Potential energy
OF EXPERIMENT The purpose of this lab was to determine the magnitude of the uncertainties produced when making measurements using common lab equipment. II.APPARATUS AND MATERIALS NEEDED safety goggles distilled water (at 20°C) laboratory apron dropper laboratory balance 2 objects of unknown mass standard masses graduated cylinder‚ 10-mL graduated cylinder‚ 100-mL III.PROCEDURE Part A: Estimating the Uncertainty of a Balance 1.We put on lab aprons and goggles. Then‚ we used the
Premium Mass Measurement Uncertainty
Lab 1- Measurements of a Table ABSTRACT: The purpose of this experiment was to determine the value of the acceleration of a free falling object and to describe the range of experimental values. Within the experiment the items used to help provide the conclusion that 2/3 or our values fell within the 9.62m/s^2- 9.78m/s^2 range was a Vernier data-collection interface‚ Logger Pro Application and the apparatus Photogate. The results found within the 30 trial periods were all precise
Premium Standard deviation Measurement Arithmetic mean
Speed of Sound Lab Report Jamie Cook PHYS 1114: College Physics I Oklahoma City Community College December 10‚ 2013 Purpose: The purpose of this experiment is to measure the speed of sound in air and to determine the effects of frequency on the speed of sound. Apparatus (equipment used): Signal generator: manufacturer- EMCO‚ model number- SS-1‚ range- 20Hz-2MHz‚ least count- 1Hz Frequency meter: manufacturer- DEADALON CORPORATION‚ model number- N/A‚ range-
Premium Sound Speed Wavelength