Morgan Land Elizabeth Hollis Physics II February 7‚ 2012 Electric Fields Lab Abstract: In this lab we will study the equipotential lines in an electric field in order to study the structure of the electric lines of force. We will plot the position of electric field lines in a given electric field using both a manual method and a computer software program. There is an electric field in any
Premium Electric charge Electromagnetism Magnetic field
The Purpose of lab 1.4 Measuring Volume by Displacement of Water was to determine the fraction of air in different granulated solids. The lab cocised of one test done on four different granular solid; with up to 3 trials on each solid. When all tests are done and put in tables‚ and the calculations are made‚ the conclusion is that grain size does not affect that fraction of air. To be able to find the fraction of air‚ 3 measurement had to be taken‚ the volume of the solid with air‚ the volume of
Premium Chemistry Water Test method
Pendulum Raiyan Hassan SPH3U September 20‚ 2011 Introduction A pendulum is a device which consists of a mass attached to a string from a frictionless pivot which allows it to swing back and forth. In this experiment‚ the time it takes for a pendulum to go through a period is going to be measured. The time it takes for a pendulum to go through one period can depend on factors such as the length of the string‚ mass‚ or the degree in which the pendulum is released from (amplitude). In this
Premium Mass Measurement Time
Spokane‚ Washington. Viney and Fenton (1998) defined the term electrophoresis as‚ “the migration of charged particles through a static medium under the action of an applied electric field (p. 576). Just from this definition‚ it is clear that numerous physics concepts can be used to help explain why electrophoresis works. First‚ I will discuss charge and electric fields and how these principles are utilized in gel electrophoresis. This will be followed by a
Premium Electric charge Electromagnetism Electron
Torque and Equilibrium Purpose: Apply principle of static equilibrium to determine a coefficient of friction. Research Question: What is the coefficient of friction between a meter stick and wall? Hypothesis: Tying a piece of string on to the end of a meter stick‚ put the other end of the meter stick against the wall so that the meter stick is horizontal and does not slide down the wall. Hang a weight on the meter stick sliding it to a point where the meter stick is about to come off from
Premium Mass Force Kilogram
Conclusion: Category 1: Momentum was found that after the collision was less than before the collision by 10%. This was not what has been expected‚ so the difference was fairly significant. This happened because of friction‚ when the two pucks collided‚ they have lost a bit of their momentum‚ so the momentum after the collision differed. Kinetic energy differed more than what was expected‚ it was significantly less after the collision‚ the difference before and after the collision was 63.7%‚
Premium Mass Classical mechanics Introductory physics
Parallel Forces Objective: Find FA and FB on the apparatus which are parallel to both Fulcrum A and B. Calculations: Theoretical FB Στ = 0 +FB 0.5 - (0.1kg x g x 0.1m) - (0.2kg x g x 0.4m) - (0.05kg x g x 0.7m) - (0.1kg x g x 0.3m) = 0 -[{(0.1kg x 0.1m) + (0.2kg x 0.4m) + (0.05kg x 0.7m) + (0.1kg x 0.3m)}x 9.8] + 0.5FB = 0 0.5FB = [(0.1 x 0.1) + (0.2 x 0.4) + (0.05 x 0.7) + (0.1 x 0.3)]x 9.8 FB = FB = 3.04 N Experimental FB FB = mpanB g - mfulcrumB g FB = (0.385kg x 9.8)
Premium Experiment Theory
Name: _________________ Wire Resistance and Ohm’s Law Go to http://phet.colorado.edu/simulations/sims.php?sim=Ohms_Law and click on Run Now. Wire Resistance and Ohm’s Law Procedure Part I Wire Resistance: open the PhET Simulation Electricity‚ Magnets‚ and Circuits Resistance in a Wire. As wire length (cm) increases‚ the resistance (Ω) _____increases_____ As wire area (cm2) increases‚ the resistance (Ω) _______decreases_______ As wire resistivity (Ωcm) increases‚ the resistance
Premium Incandescent light bulb Electric current Volt
Measurement of Mass‚ Volume‚ and Density through Archimedes Principle Overview: The purpose of this experiment was to measure the density of a solid and a liquid using Archimedes principle. Archimedes is one of the greatest inventors and mathematicians of all time. The principle we used in this experiment was discovered when Archimedes stepped into a full bath tub. Using Archimedes principle‚ we were able to determine the density of a lead rod‚ water‚ and an unknown liquid. Physical Data:
Premium Management Marketing Mass
DP Physics IA Thermal physics: Specific Heat Capacity of Metals Introduction: In this experiment we are going to measure the specific heat capacity of a unknown metal. To measure the specific heat capacity we will heat up the metal to certain temperature and release the metal in beaker filled with water. By knowing the mass and temperature of water filled in beaker‚ we will be able to calculate the specific capacity of unknown metal by change in temperature of beaker willed
Premium Heat Thermodynamics Specific heat capacity