Erica Chan Sinh Nguyen Dat Nguyen Wed 2:00-5:00 02/19/2014 OHM’S LAW I. Purpose The purpose of this lab is to help understand how voltage‚ current and resistance are closely related to one another. The outcome from this lab is to be able to differentiate when to use ohmmeter and voltmeter for the individual circuit. II. Theory Ohm’s Law states that the electric current through a material is directly proportional to the voltage across a piece of material (such as wire) while the resistance is held
Premium Electrical resistance Resistor Ohm's law
Name: _____________________ Wire Resistance and Ohm’s Law PhET MiniLab Introduction: When an electrical potential exists in a circuit‚ a current may flow. Current is the flow of electrons in a circuit. Resistance in the circuit slows the flow of the electrons‚ reducing the current in the circuit. We will use the mathematical form of Ohm’s Law frequently when we investigate electric current and circuits later in this unit. • Open the PhET Simulation Electricity‚ Magnets‚ and Circuits ( Resistance
Premium Electric current Incandescent light bulb Volt
2006 "Ohm’s Law is the relationship among electric current‚ resistance‚ and voltage. The principle is named after the German scientist George Simon Ohm." Webster’s Online Dictionary. I will be discussing the uses of Ohm’s Law and why it is so important in everyday electrical problems whether it be simple or not. It is everywhere and used by many whether they notice it or not. Ohms law states that current in amperes is equal to voltage divided by resistance. This form of ohms law is most useful
Free Ohm's law Electric current Resistor
Study about Ohm’s Law: • To verify Ohm’s Law by calculating voltage‚ current and resistance based on different views of Ohm’s law as well as measuring those values to compare the theoretical results with the actual results. • To verify the relationships of R-I‚ V-I and R-V given ohm’s law by increasing one parameter while holding the other parameter constant‚ then measuring and calculating equivalent results of the third parameter. What is Ohm’s Law: Ohm’s Law is made from 3 mathematical equations
Premium Electric current Ohm's law Electrical resistance
An Investigation of Ohm’s Law Stephen McGill (22044566) Results from test using 25Ω Resistor: Voltage(Volts) | Current(mA) | Resistance(Ohms) | 0 | 0 | 0 | 0.57 | 20 | 28.5 | 1.01 | 40 | 25.25 | 1.49 | 60 | 24.83 | 2.01 | 80 | 25.12 | 2.51 | 100 | 25.1 | 3.0 | 120 | 25.0 | 3.51 | 140 | 25.0 | 4.0 | 160 | 25.0 | 4.5 | 180 | 25.0 | 5.03 | 210 | 23.95 | 5.52 | 230 | 24.0 | 6.02 | 250 | 24.08 | 6.51 | 270 | 24.1 | 7.0 | 290 | 24.13 | 7.5 |
Premium Electrical resistance Ohm's law Voltage
CONFIRMING OHM’S LAW BY ALEX KUCHMENKO 9.1 Aim – To Confirm Ohm’s Law through experimentation. Hypothesis – The More Ohms the resistor has‚ the weaker the current will become. Materials – Power pack‚ ammeter‚ voltmeter‚ resistors‚ connecting wires. METHOD – 1. POWER PACK POWER PACK RESISTOR RESISTOR VOLTMETER VOLTMETER AMMETER AMMETER A A V V Set up a known resistor
Premium Ohm's law Voltage Electric current
Ohms Law Ohms Law Thomas More College Thomas More College How it applies to different materials Lucas Cosmidis 11 physics How it applies to different materials Lucas Cosmidis 11 physics Aim/Purpose The aim is to investigate whether 12v light bulb and a ceramic resistor are either non- ohmic or ohmic. From results calculations can be made to find the resistance produced and then graphed indicating whether the light bulb and ceramic resistor is ohmic or non ohmic Background
Premium Ohm's law
is applied through them‚ these materials are known as ‘Ohmic’ resistors. This is because they are said to obey Ohm’s law‚ which states that if a voltmetre is used to measure the voltage (V) of an unknown resistance (R)‚ and an ammetre is used to measure the current (i) through the same unknown resistance‚ then ‘R’ would be given by R = V/i . The eureka wire used in this experiment is an ohmic resistor‚ so theoretically it can be used to measure the relationship between its length and resistance without
Premium Ohm's law Orders of magnitude Measurement
Experiment No: EM-1 Title: Ohm’s Law‚ Meters‚ Resistivity I Purpose: The basic of simple electrical circuits and measurements is learned. Also‚ investigating the dependence of the resistance of a wire on its length‚ cross-sectional area‚ and the material of which it is made. By examining electrical resistance (R) through a metal conductor‚ the voltage (V) and current (I) through the conductor‚ the following principles will be demonstrated: 1.) Ohm’s Law 2.) Dependence of resistance (R)
Premium Electric current Electrical resistance Resistivity
Design of Experiments (DOE) Tutorial Design of Experiments (DOE) techniques enables designers to determine simultaneously the individual and interactive effects of many factors that could affect the output results in any design. DOE also provides a full insight of interaction between design elements; therefore‚ it helps turn any standard design into a robust one. Simply put‚ DOE helps to pin point the sensitive parts and sensitive areas in designs that cause problems in Yield. Designers are then
Premium Factorial experiment Interaction Plot