Lab 7: Determination of Water Hardness Using a Titrator Name: Kyndal Petrie Lab Partners: None Date of Experiment: July 19‚ 2013 Location: My house Course Number: Che112 Abstract: This experiment was to determine the hardness of the local water supply. I determined that from the 1mg of EDTA used to turn the mixture blue‚ that the water from my tap is moderately soft. Experiment and Observation: In this experiment I developed a familiarity with the concept
Premium Water Hard water Calcium
Water “hardness” was analyzed in this experiment‚ through the determination of CaCO3 concentration. This was achieved by the titration of an unknown solution using a standardized 0.1M EDTA‚ and addition of Eriochrome Black T to the unknown‚ to indicate the endpoint of the titration. The average concentration of CaCO3 obtained was 1034 ppm‚ with a standard deviation of 2.4495. The results indicate that the unknown solution can be considered as hard water. Introduction The hardness of water
Premium Titration Calcium Calcium carbonate
Complexometric Determination of Water Hardness Mike Monaghan CHM 152LL 01/27/2013 Abstract: What can be found from this experiment is as follows‚ Introduction/Background: This lab was about determining water hardness. Water hardness is the amount of metal ions in the water. The most common found ion in the water is calcium ions and typically with a charge of +2. Water hardness plays a big significance in our daily life because to many metal ions in our drinking water can have adverse
Premium Water Titration Calcium
The objective of this lab is to determine the hardness of water‚ using the data collected from each titration performed with the unknown sample. Since the hardness of water arises from the presence of metal ions‚ we can use disodium salt of EDTA and the indicator Eriochrome Black T to determine the concentration of M 2+ ( Mg 2+ or Ca 2+) metal ion impurities. Chemical principle or theory involved in this lab: To determine waters hardness we will use a technique called a chelometric titration
Premium Calcium Water Hard water
Complexometric Determination of Water Hardness. Abstract: Using complexometric method of calculating water hardness‚ an EDTA solution was made and calculated to be around .00209M. This EDTA solution was then used to titrate a water sample with unknown hardness. The sample used was sample #18. The hardness of the sample was calculated to be 180505 ppm. This is within normal levels for the Mesa area. Introduction: This experiment focuses on titration with EDTA. Titration
Premium Titration Water Calcium
Quantitative Determination of Total Hardness In Drinking Water By Complexometric EDTA Titration R. A. J. Cadiz1 and J. M. Nael2 1Institute of Biology‚ College of Science 2National Institute of Geological Sciences‚ College of Science University of the Philippines‚ Diliman‚ Quezon City‚ Philippines Date Submitted: May 9‚ 2013 Abstract This experiment is about the determination of water hardness through the use of complexometric EDTA titration. Determination of water hardness is important to
Premium PH Water
Complexometric Determination of Water Hardness by EDTA Titration Bonnie Abella Dr. Asmita Kane Budruk 2/09/2014 Abstract: the complexometric EDTA titration was used to determine the salt substance in the water. This technique for the unknown sample 154 produced a water hardness of 8.43 x105=mg/L CaCO3 from the collected data which corresponds to the typical value from the city of Tempe. Introduction When the water from the rain collects impurities by dissolving the
Premium Calcium Water Hard water
Complexometric Determination Of Water Hardness By Angelica Aquino CHM 152 LL January 5‚ 2013 METHODS: 1. Prepare an approximate 0.004 M disodium EDTA solution. To prepare this solution‚ weigh about 0.7-0.8 g of Na2EDTA and dissolve in 500 mL deionized water in your plastic bottle. Make to to shake the bottle to dissolve the salt. 2. Obtain a 250-mL Erlenmeyer flask and transfer a 10 mL of CaCO3 using a buret into the flask. 3. Measure 30 mL of deionized water and add it into
Premium Titration Water Erlenmeyer flask
Experiment # 4a Title: Determination of the Hardness of Water from a Waterfall Aim: To determine the molarity of EDTA and to determine the hardness of water by measuring the concentrations of calcium and magnesium in a water sample by titration. Abstract: The aim of this experiment was to determine the molarity of a sample of EDTA and then to use this sample to determine the hardness of a sample of water. This was done using a titrimetric method. This was standardized using calcium chloride.
Premium Calcium Calcium carbonate Water
Water Technology Hardness of Water: Natural waters containing large quantities of dissolved salts of Calcium (Ca) & Magnesium (Mg) is called hard water. It is a characteristic of preventing lather formation of water with soap. Ca2+ & Mg2+ ions react with soaps which are salts of fatty acids (stearic or palmitic acid) to give insoluble scums or precipitates of calcium or magnesium stearate or palmitate. 2C17H35COO- + Ca2+ → (C17H35COO)2 Ca (scum) 2C17H35COO- + Mg2+ → (C17H35COO)2
Premium Water Chlorine