Preview

A Technical Comparison of 802.11n to 802.11g

Powerful Essays
Open Document
Open Document
1325 Words
Grammar
Grammar
Plagiarism
Plagiarism
Writing
Writing
Score
Score
A Technical Comparison of 802.11n to 802.11g
A Technical Comparison of 802.11n to 802.11g

A Technical Comparison of 802.11n to 802.11g Abstract 802.11n was developed to address issues of distance and speed. These were issues with wireless g and especially big issues with legacy devices that were used previously. Wireless N devices allow for a wider range by using multiple-input multiple-out and multiplexing allowing more data to be sent at a given time than before in previous a/g devices. It also allows for better communication between the radios and receivers to modify the signal so that noise becomes less of an issue and getting the best signal to the receiver is more of the issue. This 802.11n development led to a faster more evolved internet solution and will lead us to even faster solutions and even great distances spanned due to the distances already accomplished by this top of line, high-speed solution. It accomplishes all of this while still maintaining a high-level of security and not compromises on speed or power consumption.

A Technical Comparison of 802.11n to 802.11g

In less than a decade, wireless LANs have evolved from an interesting idea to an indispensable technology for millions of businesses and consumers. So it is just a matter of what technology to use. Currently there are two heavily used technologies which are wireless g and wireless n. This will be explained in full detail below as we look at the breakdown between both of these. Wireless g was created to increase a powerful tool for increasing the mobility and productivity of users, and have unlocked a new generation of wireless-enabled applications. Its characteristics are depicted in the table below. Frequency Spread Spectrum Technology 2.4GHz ISM band ERP; ERP-OFDM , ERP-DSSS/CCK are mandatory ERP-DSSS/CCK:1,2,5.5 and 11Mbps Data Rates ERP-OFDM:6,12,24Mbps Also supported: 9,18,36,48 and 54Mbps Backwards Compatibility Date Ratified 802.11 HR-DSSS and DSSS 2003 802.11g Characteristics Wireless G is still used today but is



References: Coleman, D. D., & Westcott, D. A. (2009). Certified Wireless Network Administrator Official Study Guide. Indianapolis, IN: Wiley Publishing, Inc.

You May Also Find These Documents Helpful

  • Satisfactory Essays

    Nt1310 Unit 2 Case Study

    • 257 Words
    • 2 Pages

    3. The 802.11n standard is the fastest. It is 4–5 times faster than 802.11a or 802.11g, and perhaps 20 times faster than 802.11b.…

    • 257 Words
    • 2 Pages
    Satisfactory Essays
  • Good Essays

    The IEEE 802.11n draft standard is intended to improve WLAN data rates and range without requiring additional power or RF band allocation.…

    • 2145 Words
    • 9 Pages
    Good Essays
  • Better Essays

    Week 3 iLab Report

    • 1123 Words
    • 4 Pages

    Ciampa, M. (2013). WNA Guide to Wireless LAN’s (3rd ed.). [VitalSource Bookshelf]. Retrieved from http://www.devryu.net/…

    • 1123 Words
    • 4 Pages
    Better Essays
  • Satisfactory Essays

    In the healthcare field the wireless technology is being used extensively, with a broad assortment of situation. The Wi-Fi exposure has to be accessible from the emergency room all the way to the pediatric ward over to the intensive care unit, with every location containing different requirements as well as deliberation (Buck, C., 2012).…

    • 500 Words
    • 2 Pages
    Satisfactory Essays
  • Satisfactory Essays

    IST 220

    • 369 Words
    • 2 Pages

    4: A friend wants to install a wireless home network. The friend wants to use either 802.11g or 802.11n. What advice would you give your friend? (8pts)…

    • 369 Words
    • 2 Pages
    Satisfactory Essays
  • Good Essays

    The first type of wireless radio wave transmission to describe in this paper is 802.11B. The 802.11B was an amendment to the original 802.11 standard released in because the original did not have fast enough speeds to be sufficient to support the needs that the technology required. 802.11B added speeds of 5.5 and 11 Mbps. The 802.11B standard also supports wireless devices that are up…

    • 764 Words
    • 4 Pages
    Good Essays
  • Satisfactory Essays

    Wireless Signals

    • 551 Words
    • 3 Pages

    Wireless signals are all around us as we walk or drive around the city or town where we live. The four types of wireless technologies that are out there are Wi-Fi, Cellular, Bluetooth, and WiMAX. We will be looking at these types of wireless technologies a little more in depth, where are they most commonly used, and how they differ from one another. The first wireless technology that we will be looking at is the Wi-Fi wireless signal. The Wi-Fi signal is mainly associated with computer networking, the specification used to create a wireless local area network is the IEEE 802.11. One would use this type of wireless technology if you were a business owner opening up a coffee shop and needed a public network. The network would have a wired connection to an internet source, then leading to a wireless router that transmits and receives the data from all of the customer’s devices that want to use the Wi-Fi. This will also connect all of the devices to one another through the network. The next type of wireless technology that we will be looking at is Cellular. This type of wireless technology is most often associated with wireless telephones. The cellular network is connected to cells that will enable a user to move around freely while staying connected to the network. This type of signal is used everywhere you go nowadays and are used by everyone. There are a multitude of devices that use these networks at one time and those include, smart phones, tablets, and some computers can use the cell towers to get a signal to be able to use the internet. The first generation of cellular signals was completely analog, and from there with the growing demand of faster speeds and better connectivity technology brought us 2G, 3G, and the ever popular 4G phones. Bluetooth is the next technology that we will touch on and is very similar to the Wi-Fi and cellular networks but on…

    • 551 Words
    • 3 Pages
    Satisfactory Essays
  • Powerful Essays

    WIRELESS LAN PROPOSAL

    • 6190 Words
    • 18 Pages

    The purpose of this proposal is to determine if implementing a Wireless LAN in the Bank 's T-4 conference center will not only improve LAN services for employees, tenants, and visitors, but also determine if this can be a self funding and secure initiative. In order to make this determination, we desire to perform a small research experiment that we believe will clearly illustrate the need for pursuing the full implementation of a Wireless LAN. We also believe that this experiment will provide the justification to obtain full management support to pursue this initiative.…

    • 6190 Words
    • 18 Pages
    Powerful Essays
  • Powerful Essays

    Web Design

    • 3110 Words
    • 13 Pages

    WLAN design has come a long way in the last couple of years with fundamental changes and acceptance in terms of the setting of design requirements, goals and methodologies for successful WLAN deployments. Before there were professional and purpose-built tools like AirMagnet Survey for WLAN design and deployment, the entire WLAN design and decision making process was very rough and rudimentary. Most users responsible for WLAN deployment employed a so-called “back-of-a-napkin” technique or did not design the network at all before deployment. This led to improper deployments of the network, which in turn led to wasted time, money, effort, and most importantly, a lack of positive results for the users in terms of connectivity or optimum performance. “Back-of-a-napkin” technique In the “napkin” technique, the user responsible for WLAN design drew the floor map on a piece of paper. In most cases, this map was simply a square or a rectangleshaped box that represented the 4 walls of a building. Next, the designer would mark 4 locations at the corners of the building and 1 in the center representing locations where APs needed to be placed. This design method would then be repeated for every floor. This method has some major shortcomings that must be overcome in order to have a WLAN that provides optimum security, performance and compliance to the user. Shortcomings include: 1. No consideration into the actual capabilities of the AP (channels, media, transmit power, etc.); 2. No consideration into locations where APs could be placed dependent on availability of the power or Ethernet cable drop points; 3. No consideration into coverage bleed-over outside the corporate building, which is a major security risk; 4.…

    • 3110 Words
    • 13 Pages
    Powerful Essays
  • Better Essays

    Wimax

    • 2102 Words
    • 9 Pages

    The other name of WiMax is IEEE 802.16 and it is anticipated for the metropolitan area where they can experience heavy traffic and broad reach. WiFi can be sustained by WiMax without problems. The interference decreases and can access both recognized and unrecognized frequencies and can call for synchronized surroundings. It guarantees the fact that wireless is mass-produced for consumers use can be used from retailer to retailer. The WiMax ensured that the standards are maintained by testing and experimenting. The more topical Long Term Evolution (LTE) standard is same as the term unfolding comparable equipment to WiMAX that is being technologically advanced by…

    • 2102 Words
    • 9 Pages
    Better Essays
  • Good Essays

    Wap Architecture

    • 7984 Words
    • 32 Pages

    Compared to the wired networks there are many constraints in this wireless world. * Less band width * More latency * Less connection stability * Less predictable availability…

    • 7984 Words
    • 32 Pages
    Good Essays
  • Powerful Essays

    Brown, Clint W, “802.11ac: Wi-Fi® for the Next-Generation of Wireless Connectivity”, Wi-Fi Alliance, October 02, 2013, November 8, 2013…

    • 2064 Words
    • 9 Pages
    Powerful Essays
  • Good Essays

    Gi Fi

    • 1095 Words
    • 5 Pages

    Standard 802.11a 802.11b 802.11g Throughput Up to 54 Mbps Up to 11 Mbps Up to 54 Mbps Range Frequency Up to 300 ft Between 5 and 6 Ghz Up to 300 ft 2.4 Ghz Up to 300 ft 2.4 Ghz…

    • 1095 Words
    • 5 Pages
    Good Essays
  • Better Essays

    Network

    • 912 Words
    • 4 Pages

    The most prevalent is 802.11b. Equipment using 802.11b is comparatively inexpensive. The 802.11b wireless communication standard operates in the unregulated 2.4 GHz frequency range. Unfortunately, so do many other devices such as cordless phones and baby monitors which…

    • 912 Words
    • 4 Pages
    Better Essays
  • Satisfactory Essays

    My Project Abstract

    • 224 Words
    • 1 Page

    The purpose of this project is to gather in-depth knowledge of the of the selected topic which is , “Wireless Technology”. The points that are covered in detail under this study project are, Wi-Fi 802.11, Mobile IP Infrastructure , Distributed Systems , Antenna Technology , Authentication and Encryption .…

    • 224 Words
    • 1 Page
    Satisfactory Essays

Related Topics