Mcnum001

QCF199v2 Producing Complex Templets and Moulds in the Workplace 1.3 | State the organisational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are implemented. | | 1.4 | Describe different types of information, their source and how they are interpreted in relation to:– drawings, specifications, schedules, method statements, risk assessments, technical information and appropriate regulations. | | 2.1 | Describe their responsibilities under current legislation and official guidance whilst working:– in the workplace, below ground level, at height, with tools and equipment, with materials and substances, with movement/storage of materials and by manual handling and mechanical lifting. | | 2.2 | Describe the organisational security procedures for tools, equipment and personal belongings in relation to site, workplace, company and operative. | | 2.3 | Explain what the accident reporting procedures are and who is responsible for making reports. | | 3.2 | Explain why and when health and safety control equipment, identified by the principles of protection, should be used, relating to producing complex templets and moulds, and the types, purpose and limitations of each type, the work situation and general work environment, in relation to:– collective protective measures– personal protective equipment (PPE)– respiratory protective equipment (RPE)– local exhaust ventilation (LEV). | | 3.3 | Describe how the relevant health and safety control equipment should be used in accordance with the given instructions. | | 3.4 | State how emergencies should be responded to in accordance with organisational authorisation and personal skills when involved with fires, spillages, occupational injuries and other task-related hazards. | | 4.2 | Describe the characteristics, quality, uses, sustainability, limitations and defects associated with the resources in relation to:– sheet zinc– sheet plastic– card– profiler– measuring tape– hand and/or powered tools and equipment. | | 4.3 | Describe how the resources should be used correctly and how problems associated with the resources are reported. | | 4.4 | Explain why the organisational procedures have been developed and how they are used for the selection of required resources. | | 4.5 | Describe any potential hazards associated with the resources and method of work. | | 4.6 | Describe how to calculate quantity, length, area, volume and wastage associated with the method/procedure to produce complex templets and moulds. | | 5.4 | Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse weather conditions. | | 5.5 | Explain why the disposal of waste should be carried out safely in accordance with environmental responsibilities, organisational procedures, technical information, statutory regulations and official guidance. | | 6.2 | State the purpose of the work programme and explain why deadlines should be kept in relation to:– types of progress charts, timetables and estimated times– organisational procedures for reporting circumstances which will affect the work programme. | | 7.5 | Describe how to apply safe work practices, follow procedures, report problems and establish the authority needed to rectify them, to:– measure sizes and shapes of existing moulded stonework and produce drawings, templets and moulds for new and/or restoration work– set out complex geometrical shapes– produce templets, moulds and reverses for natural stone components with true and square surfaces; mouldings straight and curved in plan and elevation; tracery, ramp and twist and spheres– use hand tools, power tools and equipment. | | 7.6 | Describe the needs of other occupations and how to effectively communicate within a team when producing complex templets and moulds. | | 7.7 | Describe how to maintain the tools and equipment used when producing complex templets and moulds. | |