M2 TM 213 23 P 15 MARCH 2013 FIELD MAINTENANCE MANUAL CAL

Topics: M2 Browning machine gun, Machine gun, Spring Pages: 656 (73810 words) Published: March 22, 2015
ARMY *TM 9-1005-213-23&P
AIR FORCE TO 11W2-6-3-172
MARINE CORPS TM 02498B-OI
NAVY SW361-AC-MMM-010
TECHNICAL MANUAL
FIELD MAINTENANCE MANUAL
INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
(INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
FOR
MACHINE GUN, CALIBER .50: M2, HEAVY BARREL
FLEXIBLE, W/E, NSN 1005-00-322-9715 (EIC 4AG)
FIXED M48 TURRET TYPE, NSN 1005-00-957-3893 (EIC 4BB)
MACHINE GUN, CALIBER .50: M2, HEAVY BARREL
FLEXIBLE W/O EQUIPMENT NSN 1005-00-726-5636 (USMC)
SOFT MOUNT, NSN 1005-01-343-0747 (NAVY)
FIXED TYPE RIGHT-HAND FEED, NSN 1005-00-122-9339 (NAVY)
FIXED TYPE LEFT-HAND FEED, NSN 1005-00-122-9368 (NAVY)
*SUPERSEDURE NOTICE - This technical manual supersedes TM 9-1005-213-23&P dated 15 March 2002, including all changes. DISTRIBUTION STATEMENT C - Distribution authorized to U.S. Government Agencies and their contractors. This publication is critical technology, as determined on 17 May 2011. Other requests for this document shall be referred to the U.S. Army TACOM Life Cycle Command, ATTN: AMSTA-LCL-MPP/TECH PUBS, MS 727, 6501 E. 11 Mile Road, Warren, MI 48397–5000. Air Force requests shall be forwarded to 406 SCMS/GULA.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

HEADQUARTERS, DEPARTMENTS OF THE ARMY AND AIR FORCE,
COMMANDANT OF THE MARINE CORPS, AND
DEPARTMENT OF THE NAVY
15 MARCH 2013
wpno(Paper_frntcover)

33

PCN 184 024982 00

TM 9-1005-213-23&P

WARNING SUMMARY
This warning summary contains general safety warnings and hazardous materials warnings that must be understood and applied during operation and maintenance of this equipment. Failure to comply may result in personnel injury or death. Also included are explanations of safety and hazardous materials icons used within the technical manual.

FIRST AID
Refer to FM 4-25.11 for first aid information.
Air Force personnel, refer to AFMAN 44-163(I).
Marine Corps personnel, refer to MCRP 3-02G.
Navy personnel, refer to NTRP 4-02.1.1.
EXPLANATION OF SAFETY WARNING ICONS

EXPLOSION - Rapidly expanding symbol shows that the material may explode if subjected to high temperatures, sources of ignition, or high pressure.

EYE PROTECTION - Person with goggles shows that the material will injure the eyes.

FLYING PARTICLES - Arrows bouncing off face shield show that particles flying through the air will harm face.

FLYING PROJECTILE - Spring loaded parts could release and hit body causing injury or death.

HEAVY OBJECT - Hand with heavy object on top shows that heavy parts can crush and harm.

HOT AREA - Hand over object radiating heat shows that part is hot and can burn.

WEAPON FIRE - Accidental discharge of a weapon could cause serious injury or death.

a

03/15/2011 Rel(1.10) root(warnsum) wpno(Paper_warnsum)

TM 9-1005-213-23&P

WARNING SUMMARY - Continued
GENERAL SAFETY WARNING DESCRIPTIONS

WARNING

EYE HAZARDS
Spring-loaded parts are an eye hazard. To avoid injury to your eyes, use care when removing and installing spring-loaded parts. Wear adequate eye protection. Failure to comply may result in serious injury to personnel.

WARNING

EYE HAZARDS
Machining operations are an eye hazard. To avoid injury to your eyes, use care when machining metal parts. Wear adequate eye protection. Failure to comply may result in serious injury to personnel.

WARNING

BOLT LATCH ASSEMBLY SPRING
The spring in the bolt latch assembly is under heavy compression and could cause injury if released accidentally. Use caution when assembling or disassembling the...


References: 0030-1
03/15/2011 Rel(1.10) root(manuwp) wpno(M70023)
9525-00-249-7441
ASTM B16 (81346)
9505-00-076-8640
MS20995C41 (80205)
9505-01-556-8908
NASM20995C32 (80205)
03/15/2011 Rel(1.10) root(manuwp) wpno(M70023)
TM 9-1005-213-23&P
Continue Reading

Please join StudyMode to read the full document

You May Also Find These Documents Helpful

  • Post on November 15 2013 Research Paper
  • Electric Field
  • Cal 1000 Essay
  • March/April 2013 Ld Aff Essay
  • 2013 Assignment 4 P S Essay
  • Maintenance Essay
  • 15 Essay
  • Computer Maintenance and Training Manual Essay

Become a StudyMode Member

Sign Up - It's Free