Dot 3 Brake Fluid

Satisfactory Essays
Larry Barela
Intro auto
MSDS
Dot 3 brake fluid

Dot 3 brake fluid is an oily fluid used in hydraulic brakes to transmit pressure from the brake pedals to the brakes. Brake fluid is very hazardous and should be handled and stored properly. The chemical name is glycol ether blend. Brake fluid has a mild odor and is not flammable. It can cause severe irritation to the eyes and skin. If consumed in the eye brake fluid can cause damage to the cornea. This fluid contains 2% ethylene glycol which can be toxic if ingested. Ingestion will affect the central nervous system, lungs, and kidneys. Inhalation may cause respiratory irritation. If fluid comes in contact with eyes then flush with water for 15 minutes. If contact with skin wash with soap and water thoroughly. If inhaled remove to fresh air if breathing is affected seek medical attention.
In case of spill absorb well with suitable sorbent. Store brake fluid in a cool ventilated area. PPE includes gloves and proper safety goggles. Brake fluid is incompatible with sodium hydroxide at high temperatures. Reclaim and dispose of fluid in accordance with local and state regulations. All shops that store and require employees to handle dot 3 brake fluid must be in compliance with OSHA regulations. Anybody handling this fluid must wear proper PPE. Proper PPE can be obtained from your employer at no cost. Also employers must have MSDS information available for employees and must be willing to answer all

You May Also Find These Documents Helpful

  • Satisfactory Essays

    vc brakes

    • 592 Words
    • 2 Pages

    Ryan at VC Brakes 1. Analyze the effectiveness of the approach to change taken at VC Brakes. 2. Was Andrew Ryan effective? What could he have done differently? 3. Should Ryan stay at VC Brakes and continue to help with the TQM initiative? If so, what should he do differently? The approach taken was the right thing to do and in my opinion was well planned. The fact that it didn’t work out however means that it wasn’t the right fit for the organizational culture of VC Brakes. If VC Brakes had no division…

    • 592 Words
    • 2 Pages
    Satisfactory Essays
  • Powerful Essays

    Disk BRake

    • 14504 Words
    • 51 Pages

    Page 3-4 Material Analysis Page 5-6 Material Alternatives Page 7-8 Material Modification Page 9-10 Anti-Lock Braking system Page 11 Regenerative Braking system Page 12 Pascal’s principle Page 13 Archimedes Principle Page 14 OH&S Issues Page 15 Glossary Page 16-19 Abstract: This report presented by D Olsen Engineering Consultants covers a range of information in relation to braking systems. A disc brake has been…

    • 14504 Words
    • 51 Pages
    Powerful Essays
  • Better Essays

    Brake Assignment

    • 2092 Words
    • 9 Pages

    Historical development of vehicle brakes: The development of braking systems was synonymous with the invention of the wheel. It is assumed that some primitive methods of slowing and stoping the first vehicles and carts was to deploy a log attached by rope off the vehicle and allow it to drag along behind. Another assumed method may have been to deploy an anchor of wedge that could be stuck into the ground. As the development of brakes was becoming more of an important issue, the dragged systems…

    • 2092 Words
    • 9 Pages
    Better Essays
  • Good Essays

    Fluids

    • 2539 Words
    • 11 Pages

    statements as either true or false. If false, explain why. (a) Viscosity is a measure of how easily a fluid flows. (b) Although important, fluids are not essential to many living things. (c) A meniscus forms when water particles adhere to the sides of their container. (d) Buoyancy, like water pressure, acts in all directions. 2. Describe the relationship between mass, volume, and density of matter. 3. Use the particle theory to explain the differences between solids, liquids, and gases. 4. Comment…

    • 2539 Words
    • 11 Pages
    Good Essays
  • Good Essays

    Changing brakes

    • 572 Words
    • 3 Pages

    How to Change Brakes Intro: Brakes are the most important safety feature on any vehicle and play a huge role in all aspects of the car. Since the early 1900’s, there have been many different kinds of brakes invented and manufactured. There are two types of brakes that stuck around to still be used today, they are referred to as drum and disk brakes. Sensors and technology have improved the way brakes are made and functioned today. Although these advances are very beneficial to car buyers,…

    • 572 Words
    • 3 Pages
    Good Essays
  • Good Essays

    The brakes should be in the right condition all the time. If the problem is detected, it should be fixed immediately. Brake failure can cause accidents on the roads. In fact, 29% of large truck crashes are caused by brake failures. There are three important facts that every car owner should know about brake repair. There should be regular inspection Breaking system should be inspected regularly and not necessarily when a problem arises. Inspection is done to ensure that the Breaking system is in…

    • 406 Words
    • 2 Pages
    Good Essays
  • Better Essays

    Function of Drum Brake

    • 4652 Words
    • 19 Pages

    2003-01-3348 Drum Brake Contact Analysis and its Influence on Squeal Noise Prediction P. Ioannidis, P.C Brooks, D.C Barton University of Leeds Copyright © 2003 SAE International ABSTRACT A non-linear contact analysis of a leading-trailing shoe drum brake, using the finite element method, is presented. The FE model accurately captures both the static and pseudo-dynamic behaviour at the friction interface. Flexible–to-flexible contact surfaces with elastic friction capabilities are used to…

    • 4652 Words
    • 19 Pages
    Better Essays
  • Good Essays

    fluid

    • 512 Words
    • 3 Pages

    Fluid Balance Explain in detail the fluid compartments of the body, including distribution of fluid and electrolytes within each compartment and the movement between compartments. In the average person water constitutes 60% to the total body weight.: 42L in a 70kg individual. 40% is intracellelular fluid, while remaining 20% is extracellular. The extracellular fluid can be divided into plasma (from intravascular compartment) and interstitial fluid intracellular fluid (28 L, about 35% of lean…

    • 512 Words
    • 3 Pages
    Good Essays
  • Good Essays

    Fluid

    • 892 Words
    • 4 Pages

    Experiment 3: Fluid Flow Friction and Fitting Loss Objective To determine the pressure or head loss in different diameters pipes, joints and valves Theory Pipe flows belong to a broader class of flows, called internal flows, where the fluid is completely bounded by solid surfaces. In contrast, in external flows, such as flow over a flat plate or an airplane wing, only part of the flow is bounded by a solid surface. The term pipe flow is generally used to describe flow through round pipes…

    • 892 Words
    • 4 Pages
    Good Essays
  • Powerful Essays

    Hydraulic Brake System

    • 4566 Words
    • 19 Pages

    HYDRAULIC BRAKE SYSTEMS AND COMPONENTS FOR OFF-HIGHWAY VEHICLES AND EQUIPMENT David E. Keyser Applications Coordinator Keith Hogan OEM Sales MICO, Inc. 1911 Lee Boulevard North Mankato, MN U.S.A. 56003-2507 Fax: +1 507 625 3212 Tel: +1 507 625 6426 ABSTRACT This paper will identify some prerequisites for brake actuation circuit design, describe three basic types of brake actuation circuitry, and will point out some common problems to be avoided in brake actuation circuit design for off-highway…

    • 4566 Words
    • 19 Pages
    Powerful Essays