1.1 Scope of project:
Today automation used in every industrial and many other application such as loading ,shifting the material in various application point and also transferring the material from one place to another place for saving time ,cost ,labor work, and do not cause any damage to the material while shifting the material.
Scientific automation includes integration of additional functions in the software PLC. In addition to sequential control, motion control and control technology, the software PLC also includes measurement technology and other components
1.2 Introduction about project:
In various section there is a problem of availability of space for shifting the material or transferring the material from down side to upside so we here use to shift the material from down to up by pneumatic cylinder. First off all the material is loaded on conveyor belt that loaded material moves towards the flat platform which situated on pneumatic cylinder. The pneumatic cylinder applying the pressure to move the material upward direction, then there is one another pneumatic cylinder which place horizontally in front of second conveyor belt .The second pneumatic cylinder push the material on second conveyor belt which pass the material at target point .
1.2.1INTRODUCTION ABOUT CONVEYOR: The belt consists of one or more layers of material they can be made out of rubber. Many belts in general material handling have two layers. An under layer of material to provide linear strength and shape called a carcass and an over layer called the cover. The carcass is often a cotton or plastic web or mesh. The cover is often various rubber or plastic compounds specified by use of the belt. Covers can be made from more exotic materials for unusual applications such as silicone for heat or gum rubber when traction is essential. Material flowing over the belt may be weighed in transit using a belt weighter. Belts with regularly