METRIS BASED ADAPTIVE ROBOT CONTROL BRINGS AEROSPACE
TOLERANCES TO AUTOMOTIVE ROBOTS
Metris has taken part in a major Airbus research project that results in greater level of automated drilling and riveting within the aerospace giant. Since industrial robots do not meet Airbus process specifications, Airbus, Metris, KUKA and Delmia partnered to develop a new aerospace grade robotic platform. This patent-applied-for solution establishes a dynamic on-line link between a KUKA robot and a Metris K-series Optical CMM based metrology solution. This will result in a robotic platform that features adaptive real time motion control. Airbus expects that the flexible and low cost robotic solution – operating on aerospace accuracy tolerance – will reduce cost, cut production time and improve quality once being deployed. “Company-wide, we drill around
50 million holes per year and
half of these are manually
Summers, Engineering Group
Robotics, Airbus UK. “Our
research is part of a drive to
significantly reduce manual
processing across current and
future aircraft programs as our
build rate increases to meet
accurate enough for our process
Airbus, Metris, KUKA and Delmia partnered to develop a
new aerospace grade robotic platform.
positional accuracy of ±0.2 mm
is required in many application
areas. Our team has brought together two developmental partners, KUKA UK and M3 (now acquired by Metris) to address this problem. We believe we have come up with a winning solution, which could bring a flexible low cost robotic platform into the aerospace sector."
Metris Headquarters | Geldenaaksebaan 329 | B-3001 Leuven | Belgium | Tel +32 16 74 01 01 | Fax +32 16 74 01 03 | www.metris.com
A flexible, low cost robotic platform for the aerospace sector M3 is a DELMIA UK Service
Partner and a former Metris...
Please join StudyMode to read the full document