Assignment
CCNA Routing and Switching
Routing and Switching Essentials
Practice Skills Assessment – Packet Tracer
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button in the browser window to submit your work.
Introduction
In this practice skills assessment, you will configure the Our Town network with single-area OSPFv2. In addition, you will configure router-on-a-stick routing between VLANs. You will also implement NAT, DHCP and access lists.
All IOS device configurations should be completed from a direct terminal connection to the device console.
Some values that are required to complete the configurations have not been given to you. In those cases, create the values that you need to complete the requirements. These values may include certain IP addresses, passwords, interface descriptions, banner text, and other values.
For the sake of time, many repetitive but important configuration tasks have been omitted from this activity. Many of these tasks, especially those related to device security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations.
You will practice and be assessed on the following skills:
Configuration of initial device settings
IPv4 address assignment
Configuration and addressing of router interfaces
Configuration of a router as a DHCP server
Implementation of static and dynamic NAT
Configuration of the single-area OSPFv2 routing protocol
Configuration of a default route and static summary routes
Configuration of VLANs and trunks
Configuration of routing between VLANs
Configuration of ACL to limit device access
You are required to configure the following:
Police:
Configuration of initial router settings
Interface configuration and IPv4 addressing
Routing and Switching Essentials
Practice Skills Assessment – Packet Tracer
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button in the browser window to submit your work.
Introduction
In this practice skills assessment, you will configure the Our Town network with single-area OSPFv2. In addition, you will configure router-on-a-stick routing between VLANs. You will also implement NAT, DHCP and access lists.
All IOS device configurations should be completed from a direct terminal connection to the device console.
Some values that are required to complete the configurations have not been given to you. In those cases, create the values that you need to complete the requirements. These values may include certain IP addresses, passwords, interface descriptions, banner text, and other values.
For the sake of time, many repetitive but important configuration tasks have been omitted from this activity. Many of these tasks, especially those related to device security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations.
You will practice and be assessed on the following skills:
Configuration of initial device settings
IPv4 address assignment
Configuration and addressing of router interfaces
Configuration of a router as a DHCP server
Implementation of static and dynamic NAT
Configuration of the single-area OSPFv2 routing protocol
Configuration of a default route and static summary routes
Configuration of VLANs and trunks
Configuration of routing between VLANs
Configuration of ACL to limit device access
You are required to configure the following:
Police:
Configuration of initial router settings
Interface configuration and IPv4 addressing