The powder grinding production line is made up of main engine, analytical engine, plumbing installation, air blower, jaw crusher, elevator, stock bin, electromagnetic vibrating feeder and power distribution cabinet.
1.Firstly Large materials are crushed by jaw crusher to the needed sizes. 2.Then the materials are elevated to storage hopper by bucket elevator. 3.Thirdly, the materials are fed into the grinding chamber for grinding by vibrating feeder evenly and continuously. 4.The powder after grinding goes upwards together with the airflow, after separated by powder separator, the powder which can meet the fineness requirement enters the cyclone powder collector through pipe together with the airflow, and then is discharged from the discharge valve as final products.
1.The powder grinding production line is to grind materials in the fields of building material, mining, metallurgy and chemical industry. 2.The materials must be non-flammable and non-explosive materials such as limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, medical stone, rock phosphate, manganese ore, iron ore, glass, ceramics, active carbon, fireproof materials, heat preservation materials, chemical materials and so on. 3.The material hardness should be below 9Moh and the moisture should be below 6%. The fineness of the finished products can be adjusted between 30 mm and 400 mm. Features:
2.The screen-passing rate can reach 99%
3. Lower oil and power consumption
4. Unique design more effective than traditional machines
5. The transmission device of mainframe adopts airtight gear case and zonal wheel 6. Centralized control for the electric system, convenient to operate 7. Higher productivity and capacity utilization
8. Meet the latest environmental standard
Please join StudyMode to read the full document