Thermodynamics Essays & Research Papers

Best Thermodynamics Essays

  • Thermodynamics - 1360 Words
    Biomolecule BCH 3101 Thermodynamics of Biological Systems • Movement, growth, synthesis of biomolecules, and the transport of ions and molecules across membranes all requires energy. • All organisms acquire energy from their surroundings and utilize that energy efficiently to carry out life processes. • In order to study these bio-energetic phenomena we will require knowledge of thermodynamics. BCH3101 1 • Thermodynamics: defined as a collection of laws and principles describing the flows...
    1,360 Words | 7 Pages
  • Thermodynamics - 1889 Words
    Thermodynamics Lab Introduction: Thermodynamics is the study of energy which can exist in many forms, such as heat, light, chemical energy, and electrical energy. The variables that thermodynamics can be used to define include temperature, internal energy, entropy, and pressure. Temperature, relating to thermodynamics, is the measure of kinetic energy in the particles of a substance. Light is usually linked to absorbance and emission in thermodynamics while pressure, linked with volume, can...
    1,889 Words | 7 Pages
  • Thermodynamics - 2389 Words
    Objective: to show the relationship between pressure and temperature of saturated steam Apparatus: a Marcet boiler (Figure 1) is used. It is provided with a pressure gauge, a digital thermometer and a safety valve. An aneroid barometer is used to determine atmospheric pressure. 1 2 3 Drain valve Heater Overflow Variation of saturation temperature with pressure Thermodynamics Laboratory Manual Marcet boiler 4 5 6 7 8 9 Temperature sensor Pressure relief valve Filler opening...
    2,389 Words | 12 Pages
  • thermodynamics - 936 Words
    UNIFIED ENGINEERING Lecture Outlines 2000 Ian A. Waitz THERMODYNAMICS: COURSE INTRODUCTION Course Learning Objectives: To be able to use the First Law of Thermodynamics to estimate the potential for thermomechanical energy conversion in aerospace power and propulsion systems. Measurable outcomes (assessment method): 1) To be able to state the First Law and to define heat, work, thermal efficiency and the difference between various forms of energy. (quiz, self-assessment, PRS) 2)...
    936 Words | 7 Pages
  • All Thermodynamics Essays

  • Thermodynamics - 309 Words
    The first law of thermodynamics states that energy is neither created nor destroyed when transferred from one form to another. This means that the energy we put into a chemical or physical change will be the same energy we get out of the energy transformation. An example of the first law of thermodynamics is when you rub your hands together to generate heat on your palms. This is not creating energy instead you’ve actually moved energy from your body through your muscles and into your hands. The...
    309 Words | 1 Page
  • THERMODYNAMICS - 1480 Words
    UEME1112 Goh Sing Yau (May 2014), FES, UTAR 5 Temperature 5.1 Definition of Temperature Equality If 2 bodies are brought into contact, after a period of time, there is no observable change in their physical properties (example: length, electrical resistance, density etc). The bodies are said to be in thermal equilibrium and to be equal in temperature. The 2 systems are equal in temperature when no change in any property occurs when they are brought into communication. 5.2 The...
    1,480 Words | 15 Pages
  • Thermodynamics - 343 Words
    Thermodynamics is a branch of natural science concerned with heat and its relation to energy and work. It defines macroscopic variables (such as temperature, internal energy, entropy, and pressure) that characterize materials and radiation, and explains how they are related and by what laws they change with time. Thermodynamics describes the average behavior of very large numbers of microscopic constituents, and its laws can be derived from statistical mechanics. Thermodynamics applies to a...
    343 Words | 2 Pages
  • Thermodynamics - 3654 Words
    4/6/2014 Thermochemistry and calorimetry Chem 1 General Chemistry Virtual Textbook → Chemical Energetics →Thermochemistry Thermochemistry and calorimetry Chemical Energetics and thermodynamics - 4 The heat that flows across the boundaries of a system undergoing a change is a fundamental property that characterizes the process. It is easily measured, and if the process is a chemical reaction carried out at constant pressure, it can also be predicted from the difference between the...
    3,654 Words | 18 Pages
  • Thermodynamics - 1204 Words
    History The first established principle of thermodynamics (which eventually became the Second Law) was formulated by Sadi Carnot in 1824. By 1860, as found in the works of those such as Rudolf Clausius and William Thomson, there were two established "principles" of thermodynamics, the first principle and the second principle. As the years passed, these principles turned into "laws." By 1873, for example, thermodynamicist Josiah Willard Gibbs, in his “Graphical Methods in the Thermodynamics of...
    1,204 Words | 6 Pages
  • Thermodynamics Lab - 895 Words
    Thermodynamics- Enthalpy of Reaction and Hess’s Law Objectives: 1. To calculate the heat of reaction of a given reaction using the concepts derived from Hess’s Law. Pre-lab Questions: 1. Define Heat of Reaction. The enthalpy change associated with the completion of a chemical reaction. 2. Define Specific Heat. The energy it takes to raise the temperature of 1 gram of a substance by one degree Celsius. 3. Calculate the heat of reaction assuming no heat is lost to the calorimeter. Use...
    895 Words | 4 Pages
  • Thermodynamics Lab - 698 Words
    Wissam Kamaleddine CHM 1120 Stanley Ngeyi February 25,2012 Thermodynamics/Calorimetry Introduction: Thermochemistry investigates the relationship between chemical reactions and energy changes involving heat. The amount of heat generated or absorbed in a chemical reaction can be studied using a calorimeter. Purpose: The purpose of this laboratory was to determine the heat capacity of the calorimeter, and to understand thermodynamics/calorimetry by applying the calorimetry...
    698 Words | 3 Pages
  • Thermodynamics and Formula - 679 Words
    9. A concrete highway is built of slabs 14 m long (20Cº). How wide should the expansion cracks be (at 20Cº) between the slabs to prevent buckling if the temperature range is -30Cº to +50Cº? I know I use the formula: L = LoT L = ? (Change in length of the slabs. We are solving for this.)  = 12e-6 (Coefficient of expansion. I looked it up on page 388.) Lo = 14 m (Initial length of slabs.) T = 30 Cº (50Cº - 20Cº) (Change in temperaure. You only care about the hottest...
    679 Words | 3 Pages
  • Thermodynamics 101 - 494 Words
    COURSE INTRODUCTION Department: Department of Mechanical and Aerospace Engineering Course: Thermodynamics – I (ME 131) Credit Hours: 3-0 Course Description: Thermodynamics-I is one of the engineering foundation courses. This course deals with work / energy and their interaction. It is designed to attain knowledge about laws of thermodynamics and their application in thermal engineering. This course provides a foundation for subsequent major engineering courses like Fluid...
    494 Words | 5 Pages
  • Thermodynamics 1 - 7112 Words
    ENGINEERING THERMODYNAMICS FOR YEAR I ELECTRICAL 1 INTRODUCTION AND THE FIRST LAW OF THERMODYNAMICS All living things depend on energy for survival, and modern civilizations will continue to thrive only if existing sources of energy can be developed to meet the growing demands. Energy exists in many forms, from the energy locked in the atoms of matter itself to the intense radiant energy emitted by the sun. Many sources of energy exist: many are known, some perhaps unknown; but...
    7,112 Words | 30 Pages
  • Thermodynamics Lab - 1872 Words
    Abstract: This report will show the acquired understanding of the refrigeration cycle by using first and second laws of thermodynamics. In order to analyze this system several assumptions where made such like an isentropic process at the compressor an isenthalpic expansion in the throttling valve. Diagrams will be provided to depict these thermodynamic processes in addition to computing the heat transferred to the system and the work input to the compressor. Table of Contents Abstract...
    1,872 Words | 9 Pages
  • Thermodynamics by Coursera - 1546 Words
    [BLANK_AUDIO]. Welcome back. So last time we talked about work transfer as a form of energy transfer across the system boundary. Now there are a few key points we need to remember. Work transfer is not a system property. Where transfer depends on the process path and there are many different types and forms of work transfer so last time we introduced expansion and compression work and that's the work to raise or lower a piston. Now that type of work is very important...
    1,546 Words | 8 Pages
  • Thermodynamics Lab - 1032 Words
    Thermodynamics-Enthalpy of Reaction and Hess’s Law Purpose To demonstrate the principle of Hess’s Law and to find the heat capacity of the coffee cup calorimeter using three different reactions. Data Tave = (46.4-45.2)/2 = 45.8 qwater = -(100g)(4.184)(46.56-45.8) = -318 J Ccal = 318J/(46.56-21.2) = -12.53J/g*C Tinitial = (27.1+23.8)/2 = 25.45 qrxn = -(100g)(4.18)(38.43-24.45)+(-12.53x12.98) =-5400J/.1mol(1J/1000kJ) = -54.0 kJ/mol Tinitial = (26.0-24.5)/2 qrxn...
    1,032 Words | 4 Pages
  • Engineering Thermodynamics - 1012 Words
    czyET 3200 – Engineering Thermodynamics Homework Assignment #6 Due June 15, 2013 @ 5:00 PM Problem 4.8 - A Home Heat Pump for Space Heating We wish to do a preliminary thermodynamic evaluation of a 1kW input power home heat pump system for space heating using refrigerant R134a. Consider the following system flow diagram Thus the heat pump system absorbs heat from the evaporator placed outside in order to pump heat into the air flowing through the insulated duct over the condenser...
    1,012 Words | 3 Pages
  • Introduction to Thermodynamics - 2745 Words
    Chapter 6 Introduction to thermodynamics Topics First law of thermodynamics. Definitions of internal energy and work done, leading to dU = dq + dw. Heat capacities, Cp = CV + R. Reversible and irreversible processes. Various types of expansion, isothermal, adiabatic. CV and Cp according to kinetic theory, monatomic gases, other gases. The meaning of temperature, empirical temperature scale, perfect gas scale, the second law of thermodynamics, thermodynamic temperature scale. So far, we have...
    2,745 Words | 10 Pages
  • - Laws of Thermodynamics - 633 Words
    Lesson1- Laws of Thermodynamics Annette Tyler Laws of Thermodynamics Thermodynamics is the study of energy, the conversion of energy to various forms and the ability of energy to do work. The term ‘Thermodynamics’ originate from two root words ‘thermo’ which means heat and ‘dynamic’ which means power. The laws of thermodynamics are absolute and the observable universe obeys the Laws of Thermodynamics. The First Law of Thermodynamics is commonly known as the Law of Conservation of...
    633 Words | 2 Pages
  • Explaination of Thermodynamics - 633 Words
    A Layman’s Explanation of Two Laws of Thermodynamics Energy is encountered in many forms, such as mechanical, chemical (food and fuel), electrical, nuclear, heat, and radiant (light). Energy has the ability to bring about change or to do work. Thermodynamics is the study of energy. The field of thermodynamics studies the behavior of energy flow in natural systems. These studies have rendered two laws of thermodynamics. The first law of thermodynamics is also known as the law of conservation of...
    633 Words | 2 Pages
  • Thermodynamics Reviewer - 2618 Words
    [pic] |College of Engineering and Computer Science Mechanical Engineering Department Mechanical Engineering 370 Thermodynamics | | | |Fall 2010 Course Number: 14319 Instructor: Larry Caretto | Unit Three Homework Solutions, September 16, 2010 1 A classroom that normally contains 40 people is to be air conditioned with window air conditioning units of 6 kW cooling capacity. A person at rest may be assumed to...
    2,618 Words | 10 Pages
  • Thermodynamics and Marks - 987 Words
    HERIOT WATT UNIVERSITY SCHOOL OF ENGINEERING AND PHYSICAL SCIENCES DEGREE OF BENG IN MECHANICAL ENGINEERING First Year Mechanical Engineering Science 3 ??day ?? June 2007 ??:?? – ??:?? Answer TWO questions from each section A & B. Section A Q1. a) For a Newtonian fluid state an expression for the shear stress. [4 marks] b) An ice hockey puck traverses the ice on a thin sheet of water. A puck struck by an ice hockey player Initially...
    987 Words | 6 Pages
  • Thermodynamics and Thermochemistry - 423 Words
    Thermodynamics and Thermochemistry The study of energy and its transformations is known as thermodynamics. Thermochemistry is the branch of thermodynamics that relates to chemical reactions and energy changes involving heat. Most thermochemical studies are conducted in a laboratory where the transfer of heat can be carefully monitored in a closed system. The measurement of heat transfer is called calorimetry. The device in which heat transfer is measured is called a calorimeter. A calorimeter...
    423 Words | 2 Pages
  • Atmospheric Thermodynamics - 845 Words
    Introduction: In industry, a heat exchanger is used to cool down streams for temperature sensitive processes. The now hot cooling water is useless to the plant unless something is done to cool it down. In industry, cooling water towers are used to bring the water back down to a sufficient level . In a cooling tower, outside atmospheric air is flowed through a “column” while the hot water sprayed into the system. Since air is never at full saturation of water (unless it is raining), some of the...
    845 Words | 4 Pages
  • Thermodynamics Of Borax - 1375 Words
    Thermodynamics of Borax C3C Justin Nevins Chemistry 200, Section M1A Introduction The purpose of the lab was to determine how the solubility of Borax (Na2B4(OH)4) and other thermodynamic quantities such as enthalpy, entropy, and Gibbs free energy depend on temperature. When Sodium borate octahydrate (Borax) dissociates in water it forms two sodium ions, one borate ion and eight water molecules. The chemical reaction is shown as: (reaction 1) A simple acid-base...
    1,375 Words | 6 Pages
  • Thermodynamics notes - 1955 Words
    We have criticized evolutionists for their lack of understanding of basic thermodynamic principles, and we have criticized creationists for their inadequate explanation of why thermodynamic considerations rule out any possibility of evolution. Now it is time for us to attempt to do what others have failed to do. This is no easy task. In engineering colleges, thermodynamics often turns out to be one of two "weed-out courses" that causes students to change majors. (The other is fluid...
    1,955 Words | 7 Pages
  • Application of Thermodynamics - 2065 Words
     APPLICATION OF THERMODYNAMICS THERMODYNAMIC OF GASES (ADIABATIC CHANGE) In thermodynamic of gases, we can study about the changes to the internal energy of gas and factors affecting the internal energy. Thermodynamic also involves work done and heat supplied or lost by a gas. THERMODYNAMICS The study of temperature, heat, and related macroscopic properties comprises the branch of physics. Thermodynamics deals with processes which cause energy changes (internal...
    2,065 Words | 9 Pages
  • thermodynamics and economics - 4978 Words
    ABSTRACT The paper postulates a thermodynamic theory of money and describes both quantitavely and qualitatively its mechanics that unify economic production and finance in a sustainability framework. The theory will examine various economic issues, such as, full employment, economic growth, economic development, economic justice, the role of financial institutions, technology transitions and sustainable natural resource use, and be contrasted with the dominant money theory. It is claimed...
    4,978 Words | 15 Pages
  • Thermodynamics of Colloid - 590 Words
    Introduction Colloids is a system which consist of two or more phase, which are dispersed phase and medium of dispersion. The size of colloids particle is in the range of 10-9m to 10-6m. However this molecules is too small to be viewed under ordinary optical microscopy measurement. This colloidal particles is classified into several type, based on the physical state of the dispersed phase and dispersed medium. Moreover for solution, it can be defined as a homogenous phase which is formed by...
    590 Words | 2 Pages
  • INTRODUCTION TO THERMODYNAMICS - 1518 Words
    FUNDAMENTALs of thermodynamics (meg 210) INTRODUCTION TO THERMODYNAMICS Applied Thermodynamics is the Science of the inter-relationship between Heat, Work and Properties of Systems. It is concerned with the means necessary to convert heat energy from available sources such as chemical fuel or nuclear piles into mechanical work. Classical Thermodynamics This is the transformation of work and heat in relation to the properties of matter on macroscopic or bulk basis....
    1,518 Words | 8 Pages
  • Thermodynamics: Entropy - 953 Words
    Thermodynamics is the branch of science concerned with the nature of heat and its conversion to any form of energy. In thermodynamics, both the thermodynamic system and its environment are considered. A thermodynamic system, in general, is defined by its volume, pressure, temperature, and chemical make-up. In general, the environment will contain heat sources with unlimited heat capacity allowing it to give and receive heat without changing its temperature. Whenever the conditions change, the...
    953 Words | 3 Pages
  • Thermodynamics and Ferric Oxide - 992 Words
    Chemical Energetics 1. In a certain process, 678 J of heat is absorbed by a system while 294 J of work is done on the system. What is the change in internal energy for the process? 2. 10 g of Argon gas is compressed isothermally and reversibly at a temperature of 27o C from 10L to 5L. Calculate q, W, ∆E and ∆ H for this process. R=2.0cal K-1 mol-1, At. wt of Ar=40,log 2=0.30. 3. Calculate q, W, ∆E and ∆ H for the isothermal reversible expansion of one mol of an ideal gas from...
    992 Words | 4 Pages
  • Thermodynamics and Final Volume - 928 Words
    COMSATS – LANCASTER (Dual Degree Program) EEE-112 Engineering Mechanics and Thermodynamics Assignment # 1 Submission date: Mon, Sep 17, 2012 1. A certain fluid at 10 bar is contained in a cylinder behind a piston, the initial volume being 0.05 m3. Calculate the work done by the fluid when it expands reversibly: a. at constant pressure to a final volume of 0.2 m3; b. according to a linear law to a final volume of 0.2 m3 and a final pressure of 2 bar; c. according...
    928 Words | 3 Pages
  • Thermodynamics and Heat Transfer - 1883 Words
    National Diploma in Mechanical Engineering Section A: COMPULSORY Answer ALL questions 1-12 1. A resistance temperature device has a resistance R0 = 100 Ω at 0o C. If the resistance RT = 197.7 Ω in an oil bath, what is the temperature of the oil in the bath, given that RT = R0(1+αT)? Take R0 = 100 Ω R0 = resistance at 0o C α = 3.9083 x 10-3 /o C (2 marks) NDE Thermodynamics and Heat Transfer Exam 2008 Name: _______________________________________ Read all the instructions before starting...
    1,883 Words | 13 Pages
  • Thermodynamics Lab Report - 2147 Words
     Introduction In this lab, the purpose was to verify Hess’s Law. Four main topics were covered during this experiment including enthalpy of reaction, heat of formation, Hess’s Law, and calorimetry. The enthalpy of reaction, ΔHrxn is the heat or enthalpy change for a chemical reaction. The energy change is equal to the amount of heat transferred at a constant pressure in the reaction. The change represents the difference in enthalpy of the products and the reactants and is independent of the...
    2,147 Words | 9 Pages
  • Laws of Motion and Thermodynamics - 629 Words
    When watching tennis match or any other sport who of thought science played a big part? Science is involved in many things; we just don’t see it. It’s much entertaining to watch a match then to learn from it. The way we look at science is the use of chemicals, explosions, experiments, etc. What we don’t really see is how science is related to any sport. The use of these science laws plays a big part in the way sports are played. Newtown’s laws of motion and the laws of thermodynamics set...
    629 Words | 2 Pages
  • Thermodynamics and Coffee Cup Holder
    Discussion 2mol of HCL * V = 50 cm3 * 1 mol 50/2=V V=25 cm3 Volume needed to neutralise 50 cm3 of 1 mol dm-3 of NaOH is 25 cm3 of HCL b) Independent variable: Volume of HCL Dependent variable: Temperature of mixed solution Controlled variables: Volume of alkaline, Concentration of acid, Concentration of alkaline c) Burette d)Fix the burette into a burette holder securely. Pour HCL into the burette with a funnel until it reaches the 0.0cm3 mark. e)The risk of using plastic cup...
    334 Words | 2 Pages
  • Thermodynamics impact paper - 1008 Words
    Brittany Thomaston December 4, 2013 Chemistry 409 Dr. Doba Jackson Thermodynamics within a Heat Engine Physical chemistry can be considered anything that undergoes a physical or chemical change using the underlying concepts of mathematics and physics. According to chemist Gilbert Newton Lewis, “Physical chemistry is everything that is interesting” (ACS). When you think about it, physical chemistry is all around us in the world we live in today. Some aspects of physical chemistry can even...
    1,008 Words | 3 Pages
  • Thermodynamics and Ideal Gas - 1188 Words
    First Law-Exercise: Problem 1: A volume 10 m3 contains 8 kg of oxygen at a temperature of 300 K. Find the work necessary to decrease the volume to 5 m3, (a) at a constant pressure and (b) at constant temperature. (c) What is the temperature at the end of the process in (a)? (d) What is the pressure at the end of process in (b)? (e) Show both processes in the p-V plane. Problem 2: The temperature of an ideal gas at an initial pressure p1 and volume V1 is increased at constant volume until the...
    1,188 Words | 3 Pages
  • Thermodynamics and Ideal Gas - 5879 Words
    Thermodynamics Exam Prep 2012 Chapter 1: Basic and Ideal Gas Law 1.1 State of a System System + surroundings = Universe Open system: can exchange matter and energy with the surroundings Closed system: can exchange energy with the surroundings Isolated system: cannot exchange matter or energy with the surroundings If one knows the x/y/z position and the vx/vy/vz velocity of a particle (6 parameters) for a time point t0 it is possible to predict where the particle will be for any future...
    5,879 Words | 24 Pages
  • The application of Thermodynamics In Industry - 2038 Words
     Title : The application of Thermodynamics In Industry. Student Names Student ID’s MUHAMAD NORSAM BIN HASHIM 2012901165 SYAFIQ BIN SULAIMAN 2012503549 Lecture Name : ASNIDA YANTI ANI Date of Submission : 3/9/2014 Introduction: Thermodynamics is an exciting and fascinating subject that deals with energy, which is essential for sustenance of life and thermodynamics has long been an essential part of engineering and...
    2,038 Words | 7 Pages
  • Second Law of Thermodynamics - 1022 Words
    The first law of thermodynamics states that a certain energy balance will hold when a system undergoes a change of state or a thermodynamic process. But it does not indicate whether that change of state or the process is at all feasible or not. It is the second law of thermodynamics which provides the criterion as to the probability of various processes through the statements of Clausius that ‘’Heat does not pass from a body at low temperature to one at high temperature without an accompanying...
    1,022 Words | 3 Pages
  • Thermodynamics and Thermal Efficiency - 838 Words
    dksd dksmdfklda dksmdfmsd dfdsa sdfds sdfas d gfgdsf sd fsd d s d sd d gsdf gs d fgsd f g sd d g d g df d dfgf d g dff d sf s f sf d s f s f s f sdgfsdf sdf s d g sdf d d f f d sdddddddddd f gf d f ff f f s d gs df sdfgwsgsd gfsdfljkljgs sjgfskjflskjgsl sjflskjsjg skgsjjljdf s jskjljlsjlkjs sjfkjsdflgsenters the boiler at a pressure of 18 MPa, and saturated vapor enters the turbine. The condenser pressure is 6 kPa. Determine (a) the thermal efficiency. (b) the back...
    838 Words | 3 Pages
  • Thermodynamic Variables of KNO3 - 1541 Words
     Experiment 3: Solution Calorimetry: Thermodynamics of Potassium Nitrate II. Abstract A determination of thermodynamic variables of KNO3 is presented. KNO3 was heated and dissolved in varying volumes of distilled water. Upon dissolution, the KNO3 solution was removed from heat and the temperature was recorded once crystals formed. For each solution, ∆G the Ksp were found with the temperature and molarity values. ∆H and ∆S were found through the linearization of...
    1,541 Words | 6 Pages
  • Corolaries of 2nd Law of Thermodynamics
    Corollary 1: The clausius statement of second law of thermodynamics is the first corollary i.e. ‘It is impossible to construct a device operating in a closed cycle that performs no effect other than the transfer of heat from a cooler body to a hotter body.’ The mathematical statement of which is given by; Q1‐Q2=W Q1 W Q2 Corollary 2: It is impossible to construct an engine operating between only two heat reservoirs, which will have a higher efficiency than a reversible heat engine operating...
    648 Words | 2 Pages
  • Short Essays on Thermodynamics - 351 Words
    Short Essays on Thermodynamics 1. The two ways of transferring heat are Conduction and Radiation: Heat conduction, also called diffusion, is the direct microscopic exchange of kinetic energy of particles through the boundary between two systems. When an object is at a different temperature from another body or its surroundings, heat flows so that the body and the surroundings reach the same temperature at thermal equilibrium. Conduction happens in both fluids and solids. Thermal radiation,...
    351 Words | 2 Pages
  • Thermodynamic steady flow process
     THERMODYNAMICS - THEORY A control volume may involve one or more forms of work at the same time. If the boundary of the control volume is stationary, the moving boundary work is zero, and the work terms involved are shaft work and electric work. Another work form with the fluid is flow work. Flow Work (Flow Energy) A Flow Element Flow Work with Imaginary Piston Click to View Movie (68 kB) Work is needed to push the fluid into or out of the...
    707 Words | 4 Pages
  • Thermodynamics Of Borax LAB REPORT
     Heats Effect on Borax By: Alexis H. Prince Department of Chemistry; Coastal Carolina University, Conway, SC 29526 April 13, 2015 Introduction Borax has many uses, whether it’s being used as an antiseptic, helping to cure people, getting rid of pests, or even assisting fruit trees in their growth. It is actually the most important source of the element boron, and has been used for years as a “water softening agent.” Borax was found forming in saline lakes, or one may find it in Boron,...
    1,293 Words | 5 Pages
  • Application of 2nd Law of Thermodynamics
    Another industry related to the second law of thermodynamics is the air-conditioner. As the weather in this country, Malaysia is always hot and humid, air-conditioners are used to cool down the surrounding inside the house. In fact, the concept of air-conditioner is one of the applications of the second law of thermodynamics which stated that for any process occurring in a closed system, the entropy increases for an irreversible system and remains constant for a reversible system, but never...
    526 Words | 2 Pages
  • The second law of thermodynamics - 644 Words
    The Second law of thermodynamics There are four laws of thermodynamics, which define temperature, energy and entropy, characterizing thermodynamic systems. To understand the second law of thermodynamics we should know that on a basic level it explains the “catch twenty-twos” to the first law of thermodynamics. The first law of thermodynamics says that energy can never be created nor destroyed, only transferred to another form of energy. The second law states that some processes do not take...
    644 Words | 2 Pages
  • Thermodynamics and Electronic Ear Thermometer
    THE MERCURIAL THERMOMETER The principle of the mercurial thermometer is that mercury when heated expands more than glass. If, therefore, a glass-tube having a bulb blown at one end be partially rilled with mercury and immersed in a bath at a higher temperature than its own, the mercury will rise in the tube. If the bath have a lower temperature, the mercury will fall. If the mercury neither rise nor fall we may fairly conclude that the mercury and the bath are each at the same temperature. The...
    836 Words | 3 Pages
  • A Brief Explanation of Engineering Thermodynamics
    JEPPIAAR ENGINEERING COLLEGE CHENNAI DEPARTMENT OF MECHANICAL ENGINEERING 113301 – ENGINEERING THERMODYNAMICS UNIT – 1 : ASSIGNMENT QUESTIONS 1. A piston and cylinder machine contains a fluid system which passes through a complete cycle of four processes. During a cycle, the sum of all heat transfers is -170kJ. The system completes 100 cycles per min. Complete the following table showing the method for each item, and compute the net rate of work output in kW. |Process...
    580 Words | 3 Pages
  • Thermodynamics of a laptop computer - 475 Words
     Thermodynamics of a laptop computer Electronic computers currently have many orders of magnitude more thermodynamic process of freedom than information-bearing ones (bits).Because of this, these levels of description are usually considered separately as hardware and software, but as devices approach fundamental physical limits these will become comparable and must be understood together. Using some simple test problems, I explore the connection between the information in a laptop...
    475 Words | 2 Pages
  • Basic Concepts of Thermodynamics - 2753 Words
    Thermodynamics Basic Concept and Definition Thermodynamics is known as a branch of the physics and also conceptualise engineering science. Scientists are normally interested in understanding fundamentals of physical as well as chemical behavior of the fixed and the quiescent quantities of matter and also use principles of the thermodynamics to relate properties of the matter. Whereas, engineers are in general interested in studying the systems and their interaction with the surroundings. In...
    2,753 Words | 9 Pages
  • LAB REPORT THERMODYNAMIC - 1399 Words
    Thermodynamics- Enthalpy of Reaction and Hess’s Law December 5, 2011 Kylie Case, Emma McKee, Rebecca Smith Purpose: In this lab, the purpose was to verify Hess’s Law. Theory: Four main topics were covered during this experiment including enthalpy of reaction, heat of formation, Hess’s Law, and calorimetry. The first being enthalpy of reaction, ΔHrxn, which is the heat or enthalpy change for a chemical reaction. The energy change is equal to the amount of heat transferred at a...
    1,399 Words | 7 Pages
  • Thermodynamics and Chemical Reactions - 367 Words
    Energy, often in the state of heat, is involved in chemical reactions and phases changes. Changes in energy, can translate in temperature differentiations. In such a case, energy is transferred as heat. The quantity of heat exerted in a reaction referred to as (joules) can be identified through the following equation: Heat Exerted= (Mass of Sample) x (Specific Heat) x (Change in Temperature) q=msΔT Within a calorimeter is where the reactions within this lab take place. A calorimeter allows...
    367 Words | 2 Pages
  • Thermodynamics Lab Manual - 2591 Words
    CHEMICAL LABORATORY EXPERIMENTS FOR (EP 205/EG207) LABORATORY MANUAL Lecturer/Instructor: Name: Student ID: Course: FACULTY OF ENGINEERING, ARCHITECTURE & BUILT ENVIRONMENT UCSI UNIVERSITY 2013 TABLE OF CONTENT General Instructions Experiment 1 Experiment 2 Experiment 3 Experiment 4 Experiment 5 Experiment 6 Isentropic Expansion Process Brief Depressurization The Fundamental Pressure-Temperature Relationship of Saturated Steam in Equilibrium Determination of Ratio of Volume...
    2,591 Words | 10 Pages
  • Exothermic: Thermodynamics and Data Table
    Heidi Duncan 11/24/13 Exothermic and Endothermic Reactions Lab The purpose of this lab is to observe how heat is released or absorbed with different chemicals. Data Table 1 – HCI and NaOH Trial 1 Trial 2 Avg Volume 1.0 M HCI(ml) 25 25 - Volume1.0 M NaOH (ml) 25 25 - Ti of HCI before mixing 20 20 - Ti of NaOH before mixing( 20 20 - Average Ti before mixing( 20 20 - Tf of mixture ) 26 26 - T ) 6 6 - Specific Heat (J/g) 4.184 4.184 - Heat, q (J) 1255.2...
    777 Words | 8 Pages
  • identify laws of motion thermodynamics
    Identify Laws of Motion and Thermodynamics The first example is oscillating a pendulum, which is categorized in the law of motion due to the object remaining in that state unless an external force is applied. The second example stating cooling food and drinks in a refrigerator is categorized in the laws of Thermodynamics due to thermalization. The third example of using the coffeemaker can be a combination of both laws due to moving touching to coffeemaker to make create an action is Law of...
    277 Words | 1 Page
  • chapter 5 thermodynamic - 11807 Words
    5-1 Chapter 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Conservation of Mass 5-1C Mass, energy, momentum, and electric charge are conserved, and volume and entropy are not conserved during a process. 5-2C Mass flow rate is the amount of mass flowing through a cross-section per unit time whereas the volume flow rate is the amount of volume flowing through a cross-section per unit time. 5-3C The amount of mass or energy entering a control volume does not have to be equal to the amount...
    11,807 Words | 129 Pages
  • Boilers: Thermodynamics and Marine Propulsion Plant
    Topic: Principles of Steam Plant Technology Learning Objectives: • Develop an understanding of the principles of thermodynamics and mechanical engineering related to the design of marine propulsion and auxiliary boilers. • Become familiar with the factors affecting overall efficiency of the generation system, and the measures taken to optimize the performance of a steam propulsion plant. Reading Assignment: • Modern Marine Engineer's Manual – MMEM Chapter 1 Chapter 3 - pages 1...
    392 Words | 2 Pages
  • Refrigeration: Thermodynamics and Simple Vapor Compression
    Refrigeration Cycles Prof. U.S.P. Shet , Prof. T. Sundararajan and Prof. J.M . Mallikarjuna 6.5 Simple Vapor Compression Refrigeration System: A simple vapor compression refrigeration system consists of the following equipments: i) Compressor ii) Condenser iii) Expansion valve iv) Evaporator. B COMPRESOR C ∆Q1 200C FLUID TO BE COOLED EVAPORATOR (-300C) w CONDENSER (350C) COOLING WATER 00C ∆Q2 A EXPANSION VALVE D Fig.6.5. Simple vapour compression system...
    1,611 Words | 10 Pages
  • Thermodynamics: Entropy and Suggested Reading Problems
    Chapter 1 Introduction and Basic Concepts 1-1 Thermodynamics and Energy Application Areas of Thermodynamics 1-2 Importance of Dimensions and Units Some SI and English Units Dimensional Homogeneity Unity Conversion Ratios 1-3 Systems and Control Volumes 1-4 Properties of a System Continuum 1-5 Density and Specific Gravity 1-6 State and Equilibrium The State Postulate 1-7 Processes and Cycles The Steady-Flow Process 1-8 Temperature and the Zeroth Law of Thermodynamics Temperature Scales The...
    506,121 Words | 2088 Pages
  • Unit 08 Thermodynamics Students Manua
    CBSE-i CLASS XI UNIT-8 CHEMISTRY Thermodynamics Student's Manual Shiksha Kendra, 2, Community Centre, Preet Vihar, Delhi-110 092 India CLASS CBSE-i XI UNIT-8 CHEMISTRY Thermodynamics Student's Manual Shiksha Kendra, 2, Community Centre, Preet Vihar, Delhi-110 092 India The CBSE-International is grateful for permission to reproduce and/or translate copyright material used in this publication. The acknowledgements have been included wherever appropriate and sources from where the...
    24,553 Words | 184 Pages
  • Calorimetry: Thermodynamics and Specific Heat Value
     Calorimetry and Specific Heat Tessa Williams Chemistry 111 11/13/13 Abstract: In this experiment, the specific heat and the density of an unknown metal was determined in order to identify the unknown metal. The average specific heat of the unknown metal was 0.197˚C and was determined using a calorimeter. The density of the unknown metal was 6.57 g/mL and was determined using a cylinder and displacement. Using the specific heat value of the unknown...
    983 Words | 5 Pages
  • Basic Principles and Definition (Thermodynamics 1)
    LESSON 1 BASIC PRINCIPLES, CONCEPTS AND DEFINITION OF THERMODYNAMICS OBJECTIVES The study of this lesson will enable the students to: 1. define thermodynamics and other terms necessary in the study of thermodynamics; 2. know the approaches in the study of thermodynamics; 3. state the difference between dimension and unit; 4. explain the different thermodynamics system; 5. differentiate homogenous system to a non homogenous system; 6. know the different thermodynamic properties and...
    3,920 Words | 16 Pages
  • Rice: Thermodynamics and Grain Drying Rate
    General: Drying: Drying is the process that reduces grain moisture content to a safe level for storage. Drying is the most critical operation after harvesting a rice crop. Delays in drying, incomplete drying or ineffective drying will reduce grain quality and result in losses. Drying and storage are related processes. Storage of incompletely dried grain with a higher than acceptable moisture content will lead to failure regardless of what storage facility is used. In addition, the longer the...
    1,222 Words | 5 Pages
  • Thermodynamics Section/Chapter Review(S)
    Thermodynamics Section Review 9A: 1. Scientists believed that the caloric was a material but mainly that it was an invisible fluid consisting of self-repelling particles. Two examples include how gases expand according to Newton’s laws, and determining the speed of sound in air. 2. The first person to successfully challenge the caloric theory was Benjamin Thompson. Benjamin observed that a dull boring bit could generate more hat than needed to melt the entire cannon barrel. 3. The...
    1,700 Words | 6 Pages
  • Thermodynamic Investigation of the Joule-Thompson Effect
    Thermodynamic Investigation of the Joule-Thompson Effect and Coefficient Determination for Helium and Carbon Dioxide Niki Spadaro, Megan Cheney, and Jake Lambeth University of North Florida, CHM4410C Fall 2010 The Joule-Thomson coefficient explains the behavior of any real gas when changes in intensive properties, such as temperature and pressure, occur. The coefficients for helium and carbon dioxide were determined using a Joule-Thomson apparatus that created constant enthalpy within the...
    2,206 Words | 10 Pages
  • Physics: First Law of Thermodynamics Assignment Solutions
    CHAP. 20] 207 FIRST LAW OF THERMODYNAMICS The Carnot cycle is the most efficient cycle possible for a heat engine. An engine that operates accordance to this cycle between a hot reservoir (Til) and a cold reservoir (Te) has efficiency ef' lmax = In Tc I - -T II Kelvin temperatures must be used in this equation. Solved Problems 20.1 III In a certain process, 8.00 kcal of heat is furnished to the system while the system does 6.00 kJ of work. By how much does...
    2,110 Words | 25 Pages
  • Thermodynamic Exam Paper 2012- Level 1
    School of Engineering and Design SED06: Examinations Cover Sheet SUBJECT AREA: MECHANICAL ENGINEERING Module Code: Module Title: ME1301 THERMOFLUIDS Date-Month: MAY Year: 2012 Time allowed Hours: THREE Answer FOUR questions: TWO from Section A, TWO from Section B. Examiner(s): Prof. T. Megaritis and Dr R. Kirby Special Stationery Requirements: Thermodynamic and Transport Properties of Fluids, GFC Rogers and YR Mayhew. Only School approved calculators are allowed....
    1,649 Words | 7 Pages
  • Thermodynamic Modeling: a Unique Tool to Study Magma Evolution
    Thermodynamic Modeling: A Unique Tool to Study Magmatic Systems Nikitha Susan Saji Given a set of variables - temperature, pressure and concentrations of chemical components forming the system – thermodynamic theory has the rigorous theoretical framework that can simulate chemical evolution of magmatic systems. This is what thermodynamic modeling does. Equilibrium phase composition of the system is calculated as a function of existing conditions. This article primarily explains the theory and...
    2,882 Words | 10 Pages
  • The relevance of Statistics and Probability for the study of the thermodynamics properties
    Course paper in Philosophy of Science and Ethics Title: The relevance of Statistics and Probability for the study of the thermodynamics properties (The Maxwell-Boltzmann Theory) Abstract There are many philosophical debates as to the appropriateness of the use of statistics and probability as scientific research measures. Many renowned philosophers believe that since scientific investigation aims at the ultimate goal of presenting truth about the observations and processes in our...
    5,872 Words | 17 Pages
  • Practical Writeup Experiment 2, Thermodynamics of the Rhodamine B Lactone Zwitterion Equilibrium
    AIM: The aim of the experiment was to determine the enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) for the Rhodamine β-Lactone Equilibrium. To accomplish this, a manual spectrophotometer was used to determine the maximum absorbance of a sample of Rhodamine β-Lactone. The absorbance of the sample was then measured over a range of temperatures from which the equilibrium constant (K), enthalpy (ΔH), entropy (ΔS) and Gibbs free energy were then calculated. INTRODUCTION: The...
    1,923 Words | 6 Pages
  • cbse class 11 physics thermodynamics important question and sample paper
    CHAPTER 6 THERMODYNAMICS” Brief Summary of the chapter: 1. Thermodynamics: Science which deals with study of different forms of energy and quantitative relationship. 2. System & Surroundings: The part of universe for study is called system and remaining portion is surroundings. 3. State of system & state function: State of system is described in terms of T, P, V etc. The property which depends only on state of system not upon path is called state function eg. P, V, T, E, H,...
    2,369 Words | 26 Pages
  • IB Physics Thermodynamics Lab- "The purpose of this lab is to determine the identity of an unknown metal, and to prove whether the laws of thermodynamics hold when determining this identity."
    Thermodynamics Lab Purpose: The purpose of this lab is to determine the identity of an unknown metal, and to prove whether the laws of thermodynamics hold when determining this identity. Using the accepted specific heat of water (4186 J/kg · oC), heat flow between two different sets of water though the conduction of an unknown metal can provide useful data in determining the identity. The heat transfers can be calculated to approximate the specific heat of the unknown metal. When heat is...
    1,069 Words | 7 Pages
  • Thermodynamic Properties of 1 Ethyl-3Methylimidazolium Ethylsulphate: Water-Based Working Pair for an Absorption Refrigeration System
    Thermodynamic Properties of 1 Ethyl-3Methylimidazolium Ethylsulphate - Water Based Working Pair for an Absorption Refrigeration System Gorakshnath D. Takalkar* and Sunil S. Bhagwat  Abstract— Absorption refrigeration systems (ARS) are alternative systems to conventional compression cycles in which the energy necessary for the refrigeration is provided through heat instead of mechanical power. The present work deals with thermodynamic properties evaluation of Ionic liquid 1...
    1,364 Words | 5 Pages
  • Hess's Law - 1439 Words
    Enthalpy and Hess’s Law Lab Introduction Every chemical reaction is accompanied by a change in heat. Thermochemical reactions include the heat of reaction as part of the equation. The heat released or absorbed in a reaction at constant pressure is the Enthalpy change (∆Hrxn) for the reaction. The enthalpy change for each reaction is unique to that reaction. Many values for ∆Hrxn were experimentally determined, and many were calculated used Hess’s law. This lab will illustrate the principle...
    1,439 Words | 7 Pages
  • Designing a Handwarmer Lab Report (AP Chemistry)
    Lab 5 Julia (hour 2) TITLE: INVESTIGATION – Hand Warmer Design Challenge: Where does the heat come from? PURPOSE: to determine which of the 3 ionic compounds (NaCl, LiCl, or NaCH3COO) is most suitable for use as a hand warmer PROCEDURE: DAY 1 (Part 2 only): 1) Measure out 2 separate samples of 100.0 mL of distilled water 2) Heat one to about 50˚C, and place other one in calorimeter (at around 20˚C) 3) Add heater water to calorimeter,...
    1,784 Words | 24 Pages
  • Chemistry - 1031 Words
    Constructing Distillation Diagrams to Determine Activity Coefficients of the Real solution of Binary Liquids Kim Shannon Nguyen, Kim Shannon Nguyen* and Heenal Shah 4000 Richmond Ln, Blacksburg, VA 24060 Colmbns@vt.edu Supporting Information available ABSTRACT: This experiment attempted to determine the relationship between vapor pressure and the composition of the solutions of cyclohexane and ethyl acetate at various concentrations. This was achieved through an experimental analysis...
    1,031 Words | 4 Pages
  • Physics Investigation SHC - 379 Words
    An investigation into the specific heat capacity of a solid Introduction: In this experiment I investigated the specific heat capacity of brass and aluminium, in order to do this I arranged a series circuit with a heater, the heater would go inside the brass and aluminium and heat it for an amount of time in which I decided, I also used the voltmeter in parallel. This arrangement made me able to arrange the equation VIT= mcΔθ, since the electrical energy in would be equal to the mass times...
    379 Words | 2 Pages
  • Thermal Expansion - 644 Words
    Thermal expansion is the tendency of matter to change in volume in response to a change intemperature.[1] All materials have this tendency. When a substance is heated, its particles begin moving more and thus usually maintain a greater average separation. Materials which contract with increasing temperature are rare; this effect is limited in size, and only occurs within limited temperature ranges. The degree of expansion divided by the change in temperature is called the material's coefficient...
    644 Words | 2 Pages
  • How to Carry Out Aseptic Techniques in a Batch Culture and in the Laboratory
    How to Carry Out Aseptic Techniques in a Batch Culture and in the Laboratory | | | | | | | | | |The batch vessel should be sterilised beforehand using steam. The nutrient medium that is added to the vessel |...
    265 Words | 2 Pages
  • Problems On Nozzles - 431 Words
    Problems 1-5 are from ‘Applied Thermodynamics - For Engineering Technologists’ by Eastop TD & McConkey, page 325. Problem 1 Calculate the throat and exit areas of a nozzle to expand air at a rate of 4.5 kg/s from 8.3 bar, 327 0C into a space at 1.38 bar. Neglect the inlet velocity and assume isentropic flow. 3290 mm2; 4840 mm2 Problem 2 It is required to produce a stream of helium at the rate of 0.1 kg/s travelling at sonic velocity at a temperature of 150C. Assume isentropic flow, negligible...
    431 Words | 2 Pages
  • lab manual - 17113 Words
    ETME 3252 , Fall 2004 Thermodynamics and Heat Transfer Laboratory Manual – 11th edition Edited by: Professor Ed Braun Department of Engineering Technology Copyright ©2004. Material in this document is for your educational use only. This document contains copyrighted and other proprietary information. You may not in any way make commercial or other unauthorized use, by publication, re-transmission, distribution, caching, or otherwise, of this material, except as permitted by the...
    17,113 Words | 103 Pages
  • ammonia-water - 21726 Words
    Renewable and Sustainable Energy Reviews 31 (2014) 681–707 Contents lists available at ScienceDirect Renewable and Sustainable Energy Reviews journal homepage: www.elsevier.com/locate/rser An overview of ammonia-based absorption chillers and heat pumps Wei Wu, Baolong Wang, Wenxing Shi, Xianting Li n Department of Building Science, School of Architecture, Tsinghua University, Beijing 100084, PR China art ic l e i nf o a b s t r a c t Article history: Received 27 January...
    21,726 Words | 142 Pages
  • Energetics and Alcohols - 610 Words
    Planning Exercise 2: Energetics & Alcohols The enthalpy change of combustion of ethanol, ∆Hc, can be determined experimentally under laboratory conditions using the following apparatus. (a) Using the apparatus shown above and any other apparatus required that is normally found in a school laboratory, plan a step-by-step method to determine the enthalpy change of combustion of ethanol, ∆Hc. [4] 1. 2. 3. 4. 5. Measure 50.0 cm3 water with a measuring cylinder and fill into the copper can. Set...
    610 Words | 3 Pages
  • Bio Lap Report on Thermo Regulation
    Year 10 MYP Chemistry Investigating Thermoregulation Research Question. How does varying the surface area to volume ratio (2.0046: 1, 1.4923: 1, 0.9425: 1, 0.6480:1, 0.5970:1) affect the amount of heat lost over a period of 6 minutes of 50cm3 water with a temperature above 50? b. Prediction and Hypothesis. Make a prediction about what you expect to be the outcome. Explain your prediction using scientific ideas. I predict that the bigger the surface area to volume ratio, the...
    1,633 Words | 6 Pages
  • Determination of Heat of Solution - 1156 Words
    DETERMINATION OF THE HEAT OF SOLUTION BY THE VANT HOFF ISOCHORE METHOD Jan Vincent Arafiles, Merry Joy Arzaga, Anne Louise Ayson, Lovely Jenny Buenaflor Group 2 3A-Biochemistry chem401 laboratory ABSTRACT Thermodynamic values can be determined using the Vant Hoff isochore method. This method entails the use of equilibrium systems to determine the change in enthalpy of the solution, which can b related to the change in internal energy of the solution. The van't Hoff isochore relates...
    1,156 Words | 4 Pages
  • General Chemistry Ii - Midterm 1 Answ
    ersStudent name: ________________________________ Student ID Number: ________________________________ Length: 1.5 hours Instructor: Sandra Warren Instructions: Please use pen. Calculators allowed. Part A: (3 marks each) Q. 1 | Q.2 | Q.3 | Q.4 | Q.5 | Q.6 | Part B: (10 marks each) Q.1 | Q.2 | Q.3 | Q4. | Total: / 52 marks Part A: Short Answer. Only answer 4 of the 6 questions. (3 marks each) A1. Under standard state conditions, predict which...
    1,257 Words | 5 Pages
  • Thermometric Titration - 704 Words
    Date: October 29, 2014 Title: Thermometric Titration Purpose: To determine the concentration of sulphuric acid by thermometric titration Background Information: A thermometric titration is a titration technique where the endpoints of the reaction are located from the enthalpy change between the reagents. In thermometric titration we make use of the fact that reactions in solution are accompanied by temperature changes and thus it is possible to follow the course of the reaction with a...
    704 Words | 4 Pages
  • Rdr 1 - 1041 Words
    DATE PERFORMED: NOVEMBER 14, 2012 CALORIMETRY INSTITUTE OF CHEMISTRY, COLLEGE OF SCIENCE UNIVERSITY OF THE PHILIPPINES, DILIMAN QUEZON CITY, PHILIPPINES RECEIVED NOVEMBER 20, 2012 INTRODUCTION Heat is a form of energy that can be passed from an object with high temperature to an object with low temperature. The heat required to change the temperature of a substance by 1 K is called heat capacity. A calorimeter is a device commonly used to measure the amount of heat...
    1,041 Words | 5 Pages
  • Hello - 678 Words
    -425.93 -92.30 -407.27 -285.83 Hess's Law: ΔH(rxn) = Sum[ΔH(f) products] - Sum[ΔH(f) reactants] ΔH(rxn) = [(1 mol)(-407.27 kJ/mol) + (1 mol)(-285.83 kJ/mol)] - [(1 mol)(-425.93 kJ/mol) + (1 mol)(-92.30)] = - 359.47 kj/molWhy are there energy changes when a chemical reaction takes place? Do physical state changes involve energy changes? Exothermic energy changes and endothermic energy changes in chemical reactions are described, and exothermic reactions and endothermic reactions are discussed...
    678 Words | 3 Pages
  • Graphical Representation of Data - 921 Words
    LECTURE 7 GRAPHICAL REPRESENTATION OF DATA 1. Pressure versus temperature (P-T) 2. Pressure vs. volume (P-v) 3. Temperature vs. volume (T-v) 4. Temperature vs. entropy (T-s) 5. Enthalpy vs. entropy (h-s) 6. Pressure vs. enthalpy (P-h) The term saturation temperature designates the temperature at which vaporization takes place. For water at 99.6 C the saturation pressure is 0.1 M Pa, and for water at 0.1 Mpa, the saturation...
    921 Words | 4 Pages
  • GCII Lab 1 - 4059 Words
    Experiment I: Thermochemistry Background: Thermochemistry is the branch of chemistry that focuses on the studies of chemical reactions or physical changes and heat associated with chemical reactions. According to the first law of thermodynamics, energy cannot be created or destroyed but it can be converted from one form into another and/or transferred between different atoms, molecules, or substances. In general, energy can be classified into two categories: kinetic and potential. Kinetic energy...
    4,059 Words | 22 Pages
  • Open and Closed System - 260 Words
    OPEN SYSTEM: A system that allows third parties to make products that plug into or interoperate with it. For years, the term "open systems" (plural) referred to the Unix world because Unix ran in more types of computer hardware than any other operating system OR Open systems are computer systems that provide some combination of interoperability, portability, and open software standards. It can also mean specific installations that are configured to allow unrestricted access by people...
    260 Words | 2 Pages
  • Phsical Chemistry Laboratory - 291 Words
    CHEM 323 PHSICAL CHEMISTRY LABORATORY Name: PINAR AYDOĞAN Date of experiment: 03/10/2011 Date of submission: 10/10/2011 Accompanying TA: Gözde Barım Experiment Title: Thermal Equation of State and Critical Point PURPOSE: Determining the...
    291 Words | 2 Pages
  • Pressure-Temperature Relationship for Steam
    EXPERIMENT-1 Pressure-Temperature Relationship for Steam OBJECT: The objective of this experiment is to determine the relationship between saturation pressure and saturation temperature of the wet steam. APPARATUS: Pressure-temperature apparatus with pressure gauge and thermometer. [pic] THEORY: In order to determine the relationship between the saturation temperature and pressure of wet steam it is necessary to obtain a number of corresponding values of...
    1,148 Words | 9 Pages
  • 2 HEAT EFFECTS AND CALORIMETRY
    MA, PAULINE Date Performed: 10 SEPTEMBER 2014 NACIONGAYO, DANIELLE Date Submitted: 17 SEPTEMBER 2014 TEDERA, YVES HEAT EFFECTS AND CALORIMETRY Experiment No. 2 I. RESULTS A. Determination of Heat Capacity In this experiment, an improvised calorimeter was used to determine the heat capacity. The calorimeter weighed 4.47 grams prior to the addition of water. Tap water, 40 mL to be exact, was added to the calorimeter which increased the weight to 43.87 grams. The water was measured...
    2,511 Words | 11 Pages


All Thermodynamics Essays