Cable Essays & Research Papers

Best Cable Essays

  • QSFP Cables • QSFP+ Cables
    QSFP Cables • QSFP+ Cables QSFP/QSFP+ Active Optical Cables (AOCs) by 3M™ Interconnect Solutions Now In-Stock! Cables on Demand is pleased to now offer the latest generation of 3M™ brand 40G QSFP/QSFP+ Active Optical Cables in lengths up to 100m (330'). Enjoy throughput beyond 40.0 Gbps for the same price as our competitors' 20.0 Gbps products! Every AOC features QSFP/QSFP+ compliant connectors with 4 integrated 10.0 Gbps optical transceivers (40G+ aggregate) each; ensuring compatibility...
    474 Words | 3 Pages
  • Etectric Cables - 5903 Words
    c cabHigh Voltage Cables Next Nexans Norway AS Cable installation in Lofoten in 1961 For more than eighty years, Nexans Norway AS – formerly Standard Telefon og Kabelfabrik AS (STK) – has been the principal supplier of power cables in Norway. These eight decades have seen enormous development of the country´s hydropower resources. Today, Norway´s consumption of electricity per capita is higher than that of any other country in the world. Most of the hydro-electric power stations are...
    5,903 Words | 20 Pages
  • Cable Size - 4295 Words
    Cable Sizing Calculation From Open Electrical Jump to: navigation, search Contents[hide] * 1 Introduction * 1.1 Why do the calculation? * 1.2 When to do the calculation? * 2 General Methodology * 2.1 Step 1: Data Gathering * 2.1.1 Load Details * 2.1.2 Cable Construction * 2.1.3 Installation Conditions * 2.2 Step 2: Cable Selection Based on Current Rating * 2.2.1 Base Current Ratings * 2.2.2 Installed Current Ratings...
    4,295 Words | 14 Pages
  • Cable Tray - 30171 Words
    CT05MAN CABLE TRAY MANUAL Based on the 2005 National Electrical Code® 2005 Table of Contents Page No. Introduction ...................................................................................................................... 2 Why Cable Tray? Safety .................................................................................................................... 3 Dependability...
    30,171 Words | 102 Pages
  • All Cable Essays

  • BRB CABLES - 716 Words
    Company Profile 1 Name of the Company : BRB Cable Industries Ltd. 2 Board of Directors : Md. Mozibar Rahman - Chairman : Mrs. Selima Begum - Vice Chairman : Md. Parvez Rahman - Managing Director : Mrs. Tania Afroz - Director 3 Location of the Factory : BSCIC Industrial Estate, Kushtia-7002, Bangladesh. Tel: 071-61933,73244, 61600 Fax: 00-88-071-73641 E-mail: brbcables@gmail.com, brb@bttb.net.bd Website: www.brbcables.com 4 Registered Office : BSCIC...
    716 Words | 5 Pages
  • Jumper Cables - 795 Words
    David Xxxxxx Professor Wilson English 1010 30 October 2002 Jumper Cables There is a cold bite in the air, she draws her jacket tighter and quickly shuffles to old reliable. Once seated, she trustingly twists her key only to be greeted by the trailing off sound of a clicking solenoid as her battery makes its last dying gasps. If one has driven a car for any period of time, you are lucky if you have never lived a version of this scenario. The skill of how to properly and safely...
    795 Words | 3 Pages
  • Cable Tray - 2231 Words
    Note Created By Jignesh.Parmar www.jiguparmar.com THE NEED FOR A CABLE TRAY SYSTEM: • • • As technology advances, so too does the need for effective support systems. Today, plants and buildings are moving more and more towards automation. Requiring complex system of wiring and cable laying. Old methods of cable management become obsolete under these demanding conditions. 1. Regular inspections must be carried out, & faults located 2. Many entry/exit points are required 3. New...
    2,231 Words | 10 Pages
  • Cable Factors and Tools - 355 Words
    Factors that need to be considered when installing cable: • Jacket • Flexibility • Capacitance Aspects of proper design: • A properly designed structured cabling system is based around components or wiring units. An example of a wiring unit is a story of an office building. All the work locations on that floor are connected to a single wiring closet. All of the wiring units can be combined together using backbone cables as part of a larger system. • The transition point is where one type...
    355 Words | 2 Pages
  • The Benefits of Twisted Pair Cable
    Assignment 1: The Benefits of Twisted Pair Cable Due Week 4 and worth 100 points You are a recently hired consultant for a NCF, the Networking Consulting Firm, and your first consulting assignment is at Ocper, Inc. Upon arriving at the client, you learn from the president that there is no one dedicated to information technology or networking on the staff and there are 20 Windows peer-to-peer client computers all connected via coax cabling. The president also indicates that the company plans...
    403 Words | 2 Pages
  • The Benefits of Twisted Pair Cable
    As far as the network goes I would first suggest switching it to a LAN or local area network. This type of network is far more beneficial than the current setup as it gives you room to expand without too much of a hassle. By upgrading to this type of network you will also save money as you will be able to share hardware such as printers through multiple stations. As far as security goes, all computers will be more secure, as they will be a client of a main host on the server which will be...
    623 Words | 2 Pages
  • The Benefits of Twisted Pair Cable
    | The Benefits of Twisted Pair Cable | Tanga R. Payne | Robert WhaleIntroduction to Networking | | 4/28/2012 | | I just recently conducted an assessment at Ocper, Inc. After consulting with the president of company, it has been established that an upgrade is immensely needed for company’s current and future progress. Currently, the company has 20 Windows peer-to-peer client computers that connected by coaxial cable, in addition to projecting the company’s prospective...
    567 Words | 2 Pages
  • How to Crimp a Rj45 Cable?
    ------------------------------------------------- How to crimp a RJ45 cable? The RJ45 cable is a standard cable which has four twisted pairs of colors. It is easy to crimp a RJ45 cable and make it into a straight cable or cross the cable as required. To make a straight cable, the ends must be crimped in the same way at each end. When making a crossover cable, some wires of certain colors have to be reversed. Learning how to crimp a RJ45 cable and making straight and cross cables prove to be...
    1,109 Words | 5 Pages
  • flight control and cable system
    Flight Control And Cable Systems Cable arrangement and strands In the early day, Control cable is the only way to control flight control surfaces. Multiple strand control cables are simple, strong and reliable. Cable has several advantages over other types of linkage. It is strong and light in weight, and its flexibility makes it easy to route. In addition to primary flight controls, cable is used on engine controls emergency landing gear extension controls, trim tab system and various...
    7,824 Words | 27 Pages
  • Cable and United States Department
    Unit 3 Exercise 1 Running head: SPECIFICATIONS - DEFINITIONS Specifications - Definitions Sam Smith EN1420 Specifications - Definitions Define the following terms: Application (in terms of cabling infrastructure) : It refers to the intended use of the cabling system being installed. Unshielded Twisted – Pair: It’s a type of cable that consists of several conducting cores twisted together in pairs with no surrounding shield. Shielded Twisted- pair:...
    425 Words | 2 Pages
  • Internship Study on Cables - 8292 Words
    INTRODUCTION The internship training in SBEE CABLES (INDIA) Ltd, Bangalore is a part of the academic curriculum of Bangalore University. It is undertaken for a period of 6 weeks to fulfill the course requirement. The internship training is an eye opener regarding the actual functioning of different departments in an organization where its significance is thoroughly understood during this tenure. The Internship is an organization study. It is aimed at seeking information from various...
    8,292 Words | 32 Pages
  • The Benefits of Twisted Pair Cables
    Running Head: THE BENEFITS OF TWISTED PAIR CABLE 1 The Benefits of Twisted Pair Cable Michael Modesti Instructor: Professor Lisa CIS 175 April 28th, 2012 Strayer University THE BENEFITS OF TWISTED PAIR CABLE 2 Abstract This paper discusses the computing environment of NCF (Networking Consulting Firm). The firm has 20 Windows peer-to-peer client computers, and all connected via coax cabling. The president of the firm indicated...
    889 Words | 3 Pages
  • Jha of Cable Laying and Pulling
    JOB HAZARD ANALYSIS AND CONTROL PROGRAMME ELECTRICAL INSTALLATION |ITEM # |ACTIVITY |HAZARDS |CONTROL MEASURES | |1. |CABLE LAYING AND PULLING. |BODY INJURIES |Personnel shall wear Personal Protective Equipment such as Hardhat, Eye Protection, Hand...
    472 Words | 3 Pages
  • Fiber Optic Cable - 816 Words
    Loose Tube Versus Tight Buffer Loose tube cable manufacturing processes ensure that the optical fiber to buffer tube length ratio is controlled such that no optical fiber is compressed against the tube wall when the tube expands or contracts with changes in temperature. * Enhanced operating temperatures * Maximum protection against water penetration (this prevents ice to exist inside the cable) found within the cable core and buffer tubes – prevent ice crush from within the cable,...
    816 Words | 4 Pages
  • Designing and Constructing a LAN Cable Tester
    BREF INTRODUCTION AND BACKGROUND ABSTRACT The aim of this project is to design and construct a LAN cable tester. It is a tool for testing LAN cables to find all the problems associated with the cable. The fault in any of the wire in the cable can easily be detected by the use of this small but useful instrument and the speed can be enhanced very easily which was earlier dumped by the cable fault. . One of the primary objectives of an Engineer is to endeavour to deliver the...
    2,033 Words | 8 Pages
  • CABLE JOINING BETWEEN XLPE AND PAPER IN
    TRANSITION JOINING BETWEEN XLPE AND PAPER INSULATED HT WIRE TRANSITION JOINT: Transition cable joints are designed to joint multicore Cross-linked polyethylene (XLPE) to paper (PILC) insulated, steel wire armoured (SWA) cables, 600/1000v and 3.3kV - 3M Scotchcast resin LA range transition cable joints with TX supplementary paper cable transition kits are suitable for both XLPE to paper and paper to paper 3M low voltage transition cable joints (XLPE to PILC) feature the Advanced Resin...
    317 Words | 2 Pages
  • Coaxial Cable and Data Transmission Speed
     Tiffany Conder Course: IT331 Unit: 3 Kaplan Higher Education Course: IT331 Unit: 3 1) You have been asked to design a LAN with operation over a distance of about 100m. Compare and contrast twisted pair cable, coaxial cable, fiber-optics, and wireless for this application. You should create a table or flow chart which would facilitate choosing between these options depending on circumstances. The table or flow chart should be submitted as part of your document. You...
    614 Words | 3 Pages
  • Attenuation Effects on Data Transmitted Through Cable
    Attenuation Effects on Data Transmitted through Cable Abstract Attenuation refers to any reduction in the strength of a signal. Attenuation occurs with digital or analog signals. Attenuation is the end result of signals being transmitted extended distances. Attenuation is usually expressed in units called decibels (dBs). The cable type will determine at what point along the length of the cable signal degradation occurs. Repeaters can be inserted along the length of the cable to...
    574 Words | 2 Pages
  • How to hook up a TV to a cable box
    Cable box: Cable box is a electronic device that gets connected with the TV for watching broadcast channels. Parts: Coax Cables, Yellow composite cable, Cable box, Audio cables Operation: Cable box have ability to get or convert any channels from cable company to an analog RF signal to a channel. Instructions: 1. To begin with, first step in setting up cable connection is to connect coax cable from the wall to the cable in port on the cable box. 2. Connect one end of the yellow...
    621 Words | 2 Pages
  • Unit 6 Assignment 1 Cable Test
    Unit 6 Assignment 1 Cable Testers Wire-Map Testers A wire-map tester transmits signals through each wire in a copper twisted-pair cable to determine if it is connected to the correct pin at each end. Wire-map testers detect transposed wires, opens, and shorts which are all problems that can render a cable useless. A wire-map tester consists of a remote unit that you attach to the far end of a connection and the battery-operated, handheld main unit that displays the results. Typically, the...
    474 Words | 2 Pages
  • China Power Cable Industry 2012 Market Size, Share, Growth and Forecast
    This report has firstly introduced Power Cable definition classification industry chain etc related information. Then introduced Power Cable manufacturing technology and product specifications, And then summary statistics China major Power Cable manufacturers 2009-2013 Power Cable capacity production supply demand shortage and Power Cable selling price cost profit margin and production value, and also introduced China 32 manufacturers company basic information, 2009-2013 Power Cable capacity...
    607 Words | 3 Pages
  • Unit 4 Exercise 1
     NT1310 Physical Networking Unit 4 Exercise 1: Cabling – Definitions Horizontal Cable- The cabling between and including the telecommunications outlet and the horizontal cross-connect. Backbone Cable- A cable connection between telecommunications or wiring closets, floor distribution terminals, entrance facilities, and equipment rooms either within or between buildings. Patch Cords- Any flexible piece of cable that connects one network device to the main cable run or to a patch panel that in...
    798 Words | 3 Pages
  • Data Communications - 469 Words
    Introduction Data communications (Datacom) is the engineering discipline concerned with communication between the computers. It is defined as a subset of telecommunication involving the transmission of data to and from computers and components of computer systems. More specifically data communication is transmitted via mediums such as wires, coaxial cables, fiber optics, or radiated electromagnetic waves such as broadcast radio, infrared light, microwaves, and satellites. Data Communications...
    469 Words | 2 Pages
  • Automotive Wiring Harness Market in APA
    Automotive Wiring Harness Market in APAC Region 2015-2019 An automotive wiring harness, usually the last component to be finalized on a vehicle prototype, is an assemblage of cables or wires used in automobiles to transfer signals or electric power. It is also known as a wiring loom for automobiles. Electric wires are tied together with the help of different components such as cable ties, electrical tape, conduits, or a combination of these to form the complete wiring assembly. An automotive...
    399 Words | 3 Pages
  • NT1310 Building Codes - 486 Words
    Telecommunications Cabling Building Codes Kevin Wingate – NT1310 Introduction • The information in this presentation should be useful in making design-related decisions that will not only satisfy the move to our new building Information Technology (IT) requirements but also meet the needs of the building and its future occupants with respect to voice, video and data communications ANSI/EIA/TIA standards • * ANSI/EIA/TIA standards 568-C-Commercial Building Telecommunications Cabling Standard...
    486 Words | 4 Pages
  • Baldeo PersaudNT 1210Lab 4Exercise 411Why Are
    Baldeo Persaud NT 1210 Lab 4 Exercise 4.1.1 Why are standards so important for NICs, connectors, and media? Use your textbook and Internet research to justify your answer. So that NIC’s on different service providers can communicate with each other. Exercise 4.1.2 The voltage for registering a bit of 1 on Ethernet can be as low as 2.5 volts or even 1 volt. Why is this so low when the capacity for transmitting electricity on the copper wire is so high? Use your textbook and Internet research to...
    195 Words | 2 Pages
  • building codes - 2961 Words
    Constructing a new Structure- Building Codes The information in this document should be useful in making design-related decisions that will not only satisfy the move to our new building Information Technology (IT) requirements but also meet the needs of the building and its future occupants with respect to voice, video and data communications. The intention of this document is to provide a comprehensive understanding and reference guide that can be referred to when moving to our new...
    2,961 Words | 16 Pages
  • pepsi cola - 1153 Words
     FINOLEX CABLES Ltd. Finolex Cables Ltd, the flagship company of the Finolex Group was established in 1958 in Pune. Today, it is India's largest and leading manufacturer of electrical and telecommunication cables with a turnover in excess of Rs.16 Billion Starting with a modest beginning way back in 1958, Finolex has steadily grown and transformed to post a Rs. 2,100 crore turnover in 2011-12. From modernizing plants with state of the art technology to offering innovative solutions...
    1,153 Words | 5 Pages
  • Unit 4 for Nt 1310cabling -Definitions
    unit 4 for NT 1310Cabling -Definitions 1. Horizontal cable: The wiring/cabling between the telecommunications outlet/connector and the horizontal cross-connect. 2. Backbone Cable: Backbone Cabling is the inter-building and intra-building cable connections in structured cabling between entrances. 3. Patch Cords: Insulated cord with a plug at each end, for use with a patch panel. 4. Connectors: Cable connectors are devices for keeping two parts of an electric circuit in contact....
    836 Words | 3 Pages
  • Capturing TNF area demands by using private RF modems in local lead
    PROPOSAL ON CUSTOMISED SOLUTION FOR TNF AREA DEMANDS Purpose : To provide connectivity (p2p / internet) in remote / newly developed area locations in a cost-effective way mutually beneficial for both customer & BSNL. Method : Private RF modems in local lead from nearest Mobile BTS by customer Procedure : 1. Customer will apply higher BB, ILL or P2P leased line with own RF arrangement in end link / local lead. 2. BSNL will provide output on E1 or Ethernet from OFC CPE of nearest BTS and...
    509 Words | 2 Pages
  • Cabling and Factor Tools - 285 Words
    Unit 5 Assignment Cabling Factors and Tools When choosing cabling for a network, there are several factors to consider: cost, Expansion capabilities, bandwidth, signal attenuation, and EMI (Electro- Magnetic Interference). Each type of cable has different specifications that affect these factors, and each organization has different needs. Considering Cable system factors is very important for building a network system that meets an organization’s needs. Now in the design of the...
    285 Words | 1 Page
  • Ojt Weekly Report - 636 Words
    Last week we were grouped into twos and were given schedules to operate in the Video Tape Recording (VTR) room for three(3) days each pair. Me and my partner Roldan Tocmo were scheduled to operate on April 15-17, 2013 (Monday to Wednesday). We started on Monday as VTR Operators and went to the operating room. There are two(2) televisions used in the VTR room. One for entertainment purposes and the other for tuning in to Channel 6(BCCTV's Channel) only. There we met Sir "Ete", one of the...
    636 Words | 2 Pages
  • Nt 1310 Midterm Exam Review
    1. Plenum and coaxial cable are not common cables used today. 2. A decibel is the unit of measurement that is a tenfold logarithmic ratio of power output to power input. 3. Frequency increases does not contribute to attenuation. 4. Mutual crosstalk is not a type of crosstalk. 5. The Federal Communications Commission (FCC) is part of the US government. 6. The National Fire Protection Association (NFPA) is responsible for the development and publication of the National Electric Code....
    670 Words | 1 Page
  • Mid term - 234 Words
    NT 1310 Mid-term Hint : most of questions are NOT) 1. Twisted-pair, Fiber and Coaxial Cable are all common cables used…. Answer : NOT PLENUM 2. DECIBEL – is a tenfold logarithmic ratio of power OUTPUT to power INPUT Answer : Statement 3. An INCREASE in frequency DOES NOT contribute to ATENUATION. Answer : Statement 4. MUTUAL CROSSWALK is not a type of CROSSTALK Answer : Statement 5. The FCC is part of the US Government Answer : FCC (Federal Communications Commission) – regulates interstate and...
    234 Words | 1 Page
  • Suzuki Gsxr - 278 Words
    2001-2003 Suzuki GSXR600 Installation Instructions Button Adjustment Display Parts List Power Commander USB Cable CD-ROM Installation Guide Power Adapter Power Commander Decals Dynojet Decals Velcro® Strip Faceplate Buttons Alcohol Swab Expansion Port USB Port 1 1 1 1 1 2 2 1 1 The ignition MUST be turned OFF before installation! You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING...
    278 Words | 3 Pages
  • Transmitting Bits - 2211 Words
    Dennis Thrane NT 1210 Unit 4 Lab 10/12/2014 Exercise 4.1.1 Why are standards so important for NICs, connectors, and media? Use your textbook and Internet research to justify your answer. The physical level determines how the 0 and 1 bits are identified. So both ends need to know the voltage range for a 1 and for a 0. If they used different values then the data would be lost, or the voltage at the destination may be so high that the current delivered to the destination could destroy the...
    2,211 Words | 6 Pages
  • How to build a computer - 943 Words
     How to Build A Computer Building a computer from scratch is very complex, but also interesting. It gives you the ability to customize and personalize it to make it one’s own. In this “How To” instructional, I will be showing taking you through various steps needed in order to make this happen. This instructional will help you in designing a system targeted toward your own use. Why build ones own PC? You can upgrade easily with a custom one You will end up with a faster computer by...
    943 Words | 4 Pages
  • Setting Up a Network at a New Office
    1.1 General Setting up a new network at a new office will require the purchase of new workstations, installing a new server, or implementing network security and virus protection systems network wide. LC Comm primary goal is to translate the technology needs of your building into an industry standard solution that produces clear, tangible results for the business. It is also my goal to educate and help you understand some of the more technical aspects of your network upgrade by putting it into...
    1,105 Words | 5 Pages
  • Subscriber Loop - 322 Words
    CHAPTER 3: SUBSCRIBER LOOP DESIGN Subscriber loop – is a pair of lines connecting the subscriber to the local exchange. It is a dc loop that serves as the path for the following. 1. Talk battery 2. AC signaling 3. DC signaling 4. Varying dc signaling Commonly used Term in Subscriber Loop Design * Cable – it is an assembly of conductor in protective coverage sheet arranged so that the connection can be used singly or a combination of it. * Underground cable - it is...
    322 Words | 2 Pages
  • Netw410 Week 3 Lab
    NETW410, Farooq Afzal 07/28/13 Lab 3: Designing the Infrastructure for the Network 1. Draw a diagram the new network. 2. Will the current horizontal cabling suffice for the new network? If it will not, what type of cable should be used for the horizontal cabling? Provide detailed specifications for this cable. In my opinion Cat 6 cable should be used instead the Category 5 CM-rated UTP cable as the horizontal cables that are connected to the patch panel mounted in a relay rack in...
    629 Words | 3 Pages
  • Wiring Harness - 1411 Words
    BSA Corporation Limited ( Earlier BSA Facilities Limited ) Wiring harness Division www.bsagroup.in December 8, 2011 Company profile BSA Facilities Ltd. is a fast growing diversified professional organization established in the year 1995 outsourcing various activities related to human resources based on the skills requirement of customers. BSA Wiring harness is formed after Acquisition of Tyco Electronics Wiring harness Business at PAN India Level. BSA acquired the Plant in July-2009....
    1,411 Words | 13 Pages
  • Telecommunications Law and Regulations - 794 Words
    Steve Gelin Telecommunications Law & Regulation NETW-584 Natural Monopoly What is Natural Monopoly? A Natural Monopoly transpires where the largest supplier of the production of a product (i.e. goods or a service) in a business regularly becomes the first provider in a marketplace and has a tremendous cost advantage over other actual and prospective competitors. Natural Monopolies are companies that provide a service to an area. It increases the setup costs, it lays all the...
    794 Words | 3 Pages
  • Sms Online Grade Inquiry
    Twisted Pair Wire Physical Specification Twisted Pair Wire is a type of wiring in which two conductors of a single circuit are twisted together for the purposes of canceling out electromagnetic interference (EMI) from external sources; for instance, electromagnetic radiation from unshielded twisted pair (UTP) cables, and crosstalk between neighboring pairs. It was invented by Alexander Graham Bell. Advantages 1. Cheaper and far easier to splice 2. Less susceptible to electrical...
    1,779 Words | 7 Pages
  • Nt1310 - 932 Words
    Define the following terms: 1. Horizontal Cable : A type of inside cable designed for horizontal use in non-plenum areas. While horizontal cable must be fire retardant, the National Electrical Code (NEC) specifications are not as demanding as those governing the use of plenum cable or riser cable. See also NEC, plenum, plenum cable, and riser cable. 2. Backbone Cable : Backbone cabling is the inter-building and intra-building cable connections in structured cabling between entrance...
    932 Words | 4 Pages
  • Flexi Power - 3923 Words
    Module 2 Flexi EDGE BTS Installation Planning Confidential – IPR applies 1 © Nokia Siemens Networks Module 2 - Installation Planning / MNa / 2007-05-08 Module 2 - Flexi EDGE BTS installation planning After completing this module, the participant will be able to: Theory: • Describe the site requirements for Flexi EDGE BTS • Describe installation options for Flexi EDGE BTS • Describe the DC Power options for Flexi EDGE BTS • Describe transmission options for Flexi EDGE BTS • Describe...
    3,923 Words | 22 Pages
  • unit 6 assignment 1
     It is important to test the cables before you install them and after they are installed. Although there are many tools that are used for testing the cables in a network this paper is only going to talk about three. The first one is the multifunction cable scanner, they are available for testing both copper and fiber optic cable. One such model is the Hobbes 258898 it can test every pin of almost 20 often used cables from coax to 40 pin ribbon cables. It identifies opens, shorts and...
    667 Words | 2 Pages
  • Copper Vs Fiber - 267 Words
    Des Parks NT1310 Week 4 Activity 1: Copper Vs. Fiber Paper bandwidth demands continue to rise, both copper and fiber cable manufacturers are developing products that offer greater capacity and flexibility. In the interest of providing expanding coverage for an increasingly bandwidth-hungry world, the copper cable industry is talking about a potential Category 8 twisted-pair copper cable. Cat 8 would more than double the capacity of the Cat 6a version, offering a bandwidth of up to 2,000...
    267 Words | 1 Page
  • NT1310 Unit 3 Exercise 1
    Unit 3 Exercise 1: Specifications – Definitions Define the following terms: Application (in terms of cabling infrastructure) – systems supported by telecommunications cabling; includes Ethernet, Token ring, Fiber Distributed Data Interface (FDDI), and Asynchronous Transfer Mode (ATM) Unshielded Twisted-Pair (UTP) – a type of cabling containing pairs of copper wires that are twisted together with plastic casing but without an electromagnetically shielded jacket; typically used in Ethernet...
    443 Words | 2 Pages
  • Electrical Design - 1923 Words
    Electrical Design Mini Project–Stage2 Part A :ElectricalLoading estimation Total Tenants load of flat : 41x8X6.5K=2132KVA Load of car park :1000+0.03K=30KVA Total loading of landlord supply Loading | no | Total Power | Designed current for one component | Total Designed current | MCB rated Current | Passenger Lifts | 2 | 30kW | 15k/(0.9 X 0.85 X 380 X √3)= 29.79A | 59.58A | 63A | Fireman lift | 1 | 15kW | 15k/(0.9 X 0.85 X 380 X √3)= 29.79A | 29.79A | 32A | Fresh water...
    1,923 Words | 7 Pages
  • INTERNSHIP REPORT IUIU - 4397 Words
    ISLAMIC UNIVERSITY IN UGANDA FACULTY OF SCIENCE DEPARTMENT OF COMPUTER SCIENCE INTERNSHIP REPORT Bachelor of Computer Science BY GWADYA HUSSEIN REG.NO: TELEPHONE: E-mail: 112-063061-07348 0703590221, 0779062099 technician.utcelgon@yahoo.com, technician.elgon@gmail.com SUPERVISOR MR. OMUJAL MARTIN START: 2nd JUNE END: 15th JULY 2014 DECLARATION I Gwadya Hussein, do hereby declare that this Industrial Training Report is original and has not been published and or submitted for any other...
    4,397 Words | 26 Pages
  • Paper Bag - 1476 Words
    Advantages and Disadvantages of Internet Advantages Faster Communication The foremost target of Internet has always been speedy communication and it has excelled way beyond the expectations. Newer innovations are only going to make it faster and more reliable. Now, you can communicate in a fraction of second with a person who is sitting in the other part of the world. For more personal and interactive communication, you can avail the facilities of chat services, video conferencing and so...
    1,476 Words | 5 Pages
  • NT1310 Unit 6 Exercise 1
    Silaba Mpasu Physical Networking Unit 6 Exercise 1 Connector Installations Twisted-pair cable On a TWISTED PAIR CABLE I chose to install an RJ-45. This is the standard Ethernet connector for most systems used today. I would first measure out the length of cable that I would need. I would then use a wire cutter to cut the length that I need, leaving enough room for corrections and to open the wire. I would then use wire strippers to remove a small piece of the outer most jacket. I would then...
    419 Words | 2 Pages
  • Is3120 Unit 2 Assignment 2
    Is3120 Unit 2 Assignment 2 - Evolution of Ethernet Evolution of Ethernet Given the speeds of today’s Ethernet and the progression of the speeds, 10 to 100Gigs over 8 years and 100Gig to 1Tb since, transmission rate will double again in about 8 years. Although this seems true, I read that Ethernet fabric will rival fiber optic transmission capabilities. We must keep in might that a network is only as fast as its slowest component. This means computers will have to continue to get faster at...
    304 Words | 1 Page
  • Market Brief - Copper Wire
    MARKET BRIEF COPPER WIRE IN THE PHILIPPINES Table of Contents 1. Overview a. Description about the Copper in the Philippines b. Trade Data c. State Competitors 2. Consumer tastes 3. Trade policy and its derivatives products in the Philippines 4. Marketing Distribution Channels 5. Analysis a. Strength; b. Weakness; c. Opportunities; d. Barriers; 6. Recommendations; 7....
    6,856 Words | 40 Pages
  • NT1310 Unit 3 Exercise 1
     Cabling – Definitions 1. Application- A program running on a computer. 2. Unshielded Twisted-Pair- A pair of copper wires twisted together with no shielding. 3. Fiber-Optic Cable- Cable with one or more glass fibers that uses light to transfer data. 4. Dark Fiber- A fiber that is not carrying light. Used when extra fiber capacity is installed. 5. Coaxial Cable- Twisted-Pair cabling. It’s called coaxial because it has a single conductor surrounded by insulation and then a layer of shielding....
    311 Words | 1 Page
  • NT1310 Unit 6 Assignment 1
    Wire-Map Testers: The Wiremap test is used to identify physical errors of the installation; proper pin termination at each end, shorts between any two or more wires, continuity to the remote end, split pairs, crossed pairs, reversed pairs, and any other mis-wiring. It tests four-pair data and voice cable links terminated with standard, modular, eight-position RJ45 jacks. Shielded ports test both shielded and unshielded cabling. This is essential for just about any network as...
    256 Words | 1 Page
  • NT1330 Week 3 exercise
    Specifications – Definitions 1. Application – A system of transmission method of which is supported by telecommunications cabling such as 100base-Tx Ethernet or digital voice over IP. 2. Unshielded twisted pair – Twisted pair cabling is a type of wiring in which two conductors are twisted. 3. Shielded twisted pair – Twisted pair cabling is a type of wiring in which two conductors are twisted 4. Fiber optic cable – a cable made of optical fibers that can transmit large amounts of...
    251 Words | 2 Pages
  • Importance of Network Documentation - 1165 Words
    Importance of Network Documentation Undocumented networks are extremely common. Many times this is related more to the difficulty of keeping the documentation up to date rather than to the difficulty of the documentation process itself. Many LAN Administrators had big dreams at one time of keeping elaborate drawings detailing every last aspect of the network. However, networks tend to change too frequently for such drawings to stay current. In spite of the difficulty, having a well documented...
    1,165 Words | 4 Pages
  • Career Episode One For Electrical Engin
    Career Episode 1 Introduction Chronology : Geographical Location : Organization : xxxxxxxxxxxxxxxxxxx : Senior Engineer (Technical Support) Project : xxxxxxxxxx Customer : xxxxxxxx Title of Position ` This is the premier healthcare institution project fromxxxxxxxxxx. All the major healthcare providers in the country bided to undertake the project. I supported our sales team in preparing the technical presentation. I had presented the technical presentation to technical...
    2,463 Words | 9 Pages
  • Cabling - 2318 Words
    CABLING 1. Describe the three most common types of cabling media used in LANs. Coaxial Cable. Coaxial cable comes in two versions: Thinnet and Thicknet. Thinnet looks like regular TV cable.* It is about 1/4 inch in diameter and is very flexible and easy to work with. In contrast, Thicknet is about 1/2 inch in diameter and not very flexible. Thicknet is older and not very common anymore except as a backbone within and between buildings. Coax transmits at 10 Mbps.. Twisted Pair. Twisted pair...
    2,318 Words | 7 Pages
  • Receivables Management - 10040 Words
    INTRODUCTION: UNIFLEX CABLES LIMITED appointed interns to study the receivables position of their company. I was asked to analyze the data of the past six months starting from October’08 to March’09. I had to analyze the debtors’ payment pattern for that period and find out the reasons why there was a delay in receiving payments from the debtors’. OBJECTIVE OF THE STUDY: • Compare Actual Date of Receipt from customers with the Payment Due Date. • Find out the number of days...
    10,040 Words | 38 Pages
  • NT1310 Unit 3 Lab 1
    Eric Scantlebury NT1310 Physical Networking Unit 3 Lab 1: Building a New Structure-NFPA 4/8/14 There are a lot that goes into making a new structure. Codes and standards that we need to know before we can even start making it. Organizations like the FCC, NFPA, UL and NEC are very important. You can’t just run cables any way you want. Safety is very important when running lines. The FCC has a lot to do with cabling a new structure. Title 47 §68.213 is for new installations and modifications...
    579 Words | 2 Pages
  • unit 5 assignment1 - 309 Words
    Unit 5 Assignment 1 Cabling Factors and Tools Discussion Week 5 Flexibility What type of install is the cable going into? Is everything in a fixed position? If you have an install where items are moved around without being disconnected, using highly flexible cable is necessary. Cables in these scenarios need to be flexible to meet those demands of mobility, and also for the life of the wire so that it does not crack, break, fray or short. We had a job at a university where we moved flat...
    309 Words | 1 Page
  • Structured Cabling Rfp - 3326 Words
    A Request for Proposal (RFP) is a formal invitation issued by a business or agency requesting interested vendors to submit written proposals meeting a particular set of requirements. If interested in bidding for the project, vendors respond with a description of the techniques that they would employ to meet the requirements, a plan of work, and a detailed budget for the project, including supporting information. An RFP may form part of the final contract once negotiations between the enterprise...
    3,326 Words | 16 Pages
  • NT 1310 Unit 4 LAB 1
     Unit 4. Lab 1 New Building –Tools and Wiring The type of cabling used to design a building that will house computers and electrical engineering labs will be mostly copper and some fiber optic cabling. Out of all of the different metals and wire out there, copper is the best conductor out of all of them. You can get more power in a piece of copper than with any other option you have. This makes it efficient and helps you get the job done better than you could otherwise. A lot of...
    416 Words | 1 Page
  • Electrical Engineering Handbook - 16466 Words
    BECHTEL CORPORATION ELECTRICAL ENGINEERING HANDBOOK COMPARISON OF IEC- ANSI/NEMA Prepared by : M McLaughlin (LOEU) Special Recognition to: B. Hibbett (LOEU) M. Donati (HOEU) 0 A 13-Jan-00 12-NOV-99 REV. DATE LORO ISSUED FOR CORPORATE USE ISSUED FOR COMMENT REASON FOR REVISION MM MM BY BP BP CHECK BECHTEL CORP KGH KGH APPR REV 000 ELECTRICAL ENGINEERING HANDBOOK 3DG-E15-00002 COMPARISON OF IEC - ANSI/NEMA Page 1 of 44 E BECHTEL CORPORATION E&C CENTRAL...
    16,466 Words | 70 Pages
  • NT1210 Midterm study guide
    NT1210 Mid-Term Exam Study Sheet Chapter 1 1.Kilobye (KB), Megabyte(MB),Gigabyte(GB), Terabyte (TB) –Approx. number of bytes in each 2.Capacitor charge to represent 0 or1 3. Convert binary to decimal 4.Hexadecimal 5.Disk drive – platters, tracks, sectors Chapter 2 6.Digital voice calls 7.Video compression 8.Web address – identify protocol, server, web page 9.Internet core 10.Device drivers 11.Network topologies Chapter 3 12.Networking standards 13.De Facto standard...
    720 Words | 7 Pages
  • FOUR NODE BUS NETWORK
     INSTALLING A FOUR NODE BUS NETWORK WESLEY CURRY SEPTEMBER 30, 2013 Wesley Curry Professor Pelosi Introduction to Data Communication September 30, 2013 Installing a network can be very complicated. There are many different types and ways you can wire a network. The network I’m going to describe is fairly simple and easy to install. This network is called a bus network, and will be used on a service counter, like you see at Verizon or somewhere similar. First, you need three 10Base-2...
    249 Words | 1 Page
  • Network Cabling - 640 Words
    Cabling ABC Inc. is a company on the rise. With the growth you have already experienced, as well as the prospective growth you are expecting to accrue within the coming months, you will need to continue moving towards a more robust and reliable network for your employees. It is because of this growth that you will need to choose a wiring solution suitable for those needs. There are several wiring options that are available for what your company needs. It is in this proposal, that I will...
    640 Words | 2 Pages
  • It320 Unit 1 - 298 Words
    Homework 5.1 Pg 205 "Master it" 1. What are the three basic tools required to install a plug for a UTP wire? A. Wire Stripper B. Wire Cutter C. Cable crimper 2. What type of fiber-optic tester should you purchase to make sure the cable was installed without any fault and that enough light is being transmitted through the fiber, and what three things should you know before buying a cable? Attenuation tester, the tester should include capability for the correct...
    298 Words | 1 Page
  • Guided Transmission Media - 609 Words
    1- Describe each type of guided transmission media (structure, characteristics, pictures, examples) 1) Twisted Pair: Most common medium, two separately insulated copper wires twisted together and it’s often “bundled” into cables. * Unshielded Twisted Pair (UTP) - Ordinary telephone wire - Cheapest - Easiest to install. - Suffers from external EM interference * Shielded Twisted Pair (STP) - Metal braid or sheathing that reduces interference - More expensive...
    609 Words | 3 Pages
  • Steel Plant EAF Electrical System
    The modern steel plant receives low current, high voltage power from the generators of the electrical utility company. The purpose of the steel plant primary transformer is to step-down this voltage. The transformer thus provides high current, low voltage power for the EAF furnace. Large furnaces with transformers rated at 100MVA or higher is not uncommon. There are usually two stages to this process. The transformer first steps-down the voltage from high to medium levels. There are...
    399 Words | 1 Page
  • Tirfir Coilomatic - 1477 Words
    SERVICE TECHNICAL BULLETIN : 18 ROAD TRAFFIC ACCIDENT/RESCUE EQUIPMENT SECTION 18.3 : TIRFOR T516 COILAMATIC CONTENTS 18.3.1 INTRODUCTION 18.3.2 DESCRIPTION/SPECIFICATION 18.3.3 OPERATIONAL USE 18.3.4 CLEANING/TESTING 18.3.5 HEALTH AND SAFETY 18.3.1 INTRODUCTION The Tirfor is a light duty winch, able to be used for many lifting and pulling jobs. This Service Technical Bulletin outlines the basic capacities and safe working procedures for the Tirfor T516 as used...
    1,477 Words | 8 Pages
  • Twisted Pair and Stripe Green Stripe
    Exercise 4.1.1 The NIC works at the physical and Data Link Layer only and does not use TCP or IP those are programs that are on your computer. Exercise 4.1.2 Because one is trying to transmit information and the other is transmitting power. Two completely different things. Exercise 4.1.3 Applicators can steel reinforced concrete in a building, elevators, high capacity radio transmitters, and more expensive cables lessen the changes of interference. Exercise 4.1.4 Table 4-1 UTP...
    333 Words | 2 Pages
  • Short Report Sample - 664 Words
    The Weekly Progress Report | | |Progress Report # | 03 | | | |Reporting Period: |02.08.2011 |to |08.08.2011 | | | |Submittal Date : |August 09, 2011...
    664 Words | 3 Pages
  • Data Communication - 758 Words
    02. Compare and contrast between the bus and star topology.  A network architecture in which a set of clients are connected by a shared communications line, called as a bus.  A network consists of one central switch, hub or computer which acts as a conduit to transmit messages, called as a star.  Bus networks are the simplest way to connect multiple clients, but often have problems when two clients want to transmit at the same time on the same bus.  The star topology is a...
    758 Words | 2 Pages
  • copper versus fiber - 510 Words
    When trying to decide between copper and fiber cabling, there are several things to think about for which one best will fit your needs. A few things you will need to take into consideration when making your decision are what do you need your cable to be capable of, how far do you need your cable to run from point to point, what is your budget, and always think about the future with room to expand your business. Both copper and fiber cabling have pros and cons. Copper cabling has been around...
    510 Words | 2 Pages
  • Siwes Report at Cyberspace Network Ltd
    REPORT ON STUDENT INDUSTRIAL WORK EXPERIENCE SCHEME (SIWES) TRAINING PROGRAMME (MARCH 2012-AUGUST 2012) AT CYBERSPACE NETWORK LTD. BY ONIMOE ANN CHINYERE 09CH010437 COMPUTER & INFORMATION SCIENCES COVENANT UNIVERSITY BEING A REPORT SUBMITTED TO DEAN COLLEGE OF SCIENCE AND TECHNOLOGY IN PARTIAL FULFILMENT OF THE...
    3,648 Words | 13 Pages
  • StatementofWork - 619 Words
     Network Solutions Retail/Wholesale Sales Copyright The concepts and ideas submitted to you by us are of a confidential nature and are submitted to you on the understanding that they are to be considered by you in the strictest confidence and that no use shall be made of the said concepts and ideas, including communication to a third party, without our prior consent. Version [1.0] Date [20 November 2014] Change history Version Date Author 1.1 20 Nov 2014 Team network Contents 1....
    619 Words | 4 Pages
  • NT1210 Lab 7 - 346 Words
    Chapter 7 Lab 7.1.1 Why is it impractical for an organization to own the entirety of a WAN? There are no limitations on WANs so they can be custom built for the size of the organization. Why is it favorable for an organization to maintain ownership of the entirety of the LAN? Because the purpose of organizational expansion. Table 7-1 WAN Physical Media Media Infrastructure Summary UTP Phone lines The quality of UTP may vary from telephone-grade wire to extremely high-speed cable. The...
    346 Words | 2 Pages
  • Copper vs Fiber - 281 Words
    NT1310 Unit 4 Copper vs Fiber Copper cabling comes in many forms such as coaxial (Unshielded Twisted Pair), and STP (Shielded Twisted Pair). Coaxial has been in use for the longest period of time and one of the first types used in networking. CAT5e is the most common used today in networking with the bandwidth it supports and is available in UTP or STP. CAT6 can support any application that “lower” cables can and also has a higher bandwidth and is available in UTP and STP as well. UTP is...
    281 Words | 1 Page
  • My Life - 1283 Words
    ACL INDUSTRIAL SALES BUSINESS NAME:ACL INDUSTRIAL SALES(Formerly Steelworks Industrial Sales) | TELEHONE NUMBER:(02) 413-7422 / 412-2569 / 415-2094 / 4141874TELE/FAX NUMBER:(02) 732-8984 / 732-9053 / 732-9206 / 732-8605 743-2506 | BUSINESS ADDRESS:#6 Macopa Street Brgy.St. Peter Banawe Quezon City | E-MAIL ADDRESS:acl_industrial@yahoo.com.ph | YEARS IN BUSINESS(12) TWELVE | FORM OF BUSINESSSingle Prop. | NATURE OF BUSINESSTrader/Importer | PRODUCTS...
    1,283 Words | 13 Pages
  • Yhft - 4494 Words
    Name: Jeremiah Edison D. Pascua Course & Year: BSIT-3 Date Submitted: June 24, 2013 1. Twisted Pair Wire Physical Specification: -Twisted pair wire is a type of wiring in which two conductors of a single circuit are twisted together for the purposes of canceling outelectromagnetic interference (EMI) from external sources; for instance, electromagnetic radiation from unshielded twisted pair (UTP) cables, and crosstalk between...
    4,494 Words | 16 Pages
  • Chapter 4 Transmitting Bits
    Exercise 4.1.1 Because those same standards define how communication between different hardware and software involved, will take place. 4.1.2 The difference is between signal circuits and power circuits. Signal circuits operate at extremely low current levels and use digital logic voltage levels. Power circuits on the other hand require larger amounts of current to operate electrical devices such as motors, heating units 4.1.3 A very common application is the health care field. Shielded...
    315 Words | 2 Pages
  • Unit 8 Lab 1
    Fiber Optic Connector Assembly Oven-Cured Epoxy Application and Connector Assembly: 1. Set the curing oven to the temperature recommended by the epoxy manufacturer. 2. Follow manufacturer’s instructions for mixing the epoxy. 3. Secure needle to the syringe and load the syringe with epoxy while ensuring it is free of air pockets. 4. Insert the needle tip into the back of the connector until it bottoms out against the ferrule. Maintain pressure and slowly inject epoxy until a bead appears on the...
    662 Words | 2 Pages
  • NT1310 Unit 4 Lab 1
    Eric Scantlebury NT1310 Physical Networking Unit 4 Lab 1: New building – Tools and Wiring 4/8/14 Now that we understand the codes and standards needed to create this building, it’s time to put stuff in it. Our task at hand is to start wiring the building for a new computer science and electrical engineering labs. This building will have a lot of devices that need to be connected to the school campus network and we will need a lot of tools to do it. First off I think since our building is...
    556 Words | 2 Pages
  • Company History Diamond Power InfrastructureThe Company
     Company History - Diamond Power Infrastructure The Company traces its origins to M/s. Diamond Cables (DC), a Partnership Firm established in 1971. DC was later converted into a proprietory firm in 1984 which Shri S.N. Bhatnagar as a sole proprietor. On 1st October, 1992, Diamond Cables Private Limited (DCPL), a Company incorporated under the Act on 26th August, 1992, acquired the current assets and current liabilities of DC. DC was subsequently incorporated under the Act as a Private...
    814 Words | 6 Pages
  • 310 network lab 3
    NETW310 Week 3 Lab Report NETW310, Lab #3, Installation of Structured Cabling Lab Report Each answer is worth 2.8 points. Use a red colored font for you answers. Place the answers below the questions 1. How often are network standards reviewed? It would be every other 5 years 2. What category of UTP cabling is the minimum for a telephone cable? The cable would be a category 3 3. What category of cabling should be installed as a best practice for a telephone cable? It...
    533 Words | 3 Pages
  • NT 1210 Lab 4
    NT1210 Chapter 4 Lab 4.1.1 Why are standards so important for NICs, connectors, and media? Use your textbook and Internet research to justify your answer. Standards are put in place to make everything work together error free. Because Stability, Consistency, Minimization of packet errors. 4.1.2 The voltage for registering a bit of 1 on Ethernet can be as low as 2.5 volts or even 1 volt. Why is this so low when the capacity for transmitting electricity on the copper wire is so high? Use...
    667 Words | 3 Pages
  • Dgfdggdfg - 320 Words
    List of works I am currently involved: 1. Supply & Installation of Split type AC at different Depot, SPL 2. Installation of Light Fixture at Liquid QC Project, SPL-Pabna 3. Processing of Bill for Generator Servicing at different depots. 4. Purchasing of spare parts for Siemens Magnetic Contactor of SPL, Pabna. 5. Processing of Bill for the Supply of Under Voltage Coil, 220V for Square Herbal Project at Pabna. 6. Preparing documents & L/C related task for Computer...
    320 Words | 1 Page
  • NT1210 Unit 3 Homework
    Jennifer Nelson Unit 3 Assignment 1 Date due: July 12 Date submitted: July 12 Define Key Terms Electrical circuit: A complete loop of material that conducts electricity. Frequency: When describing energy that acts like waves, the number of times that the entire waveform repeats per second. Amplitude: When describing energy that acts like waves, when graphing the waveform centered on the X axis, and graphing some kind of power (for example, voltage) on the Y axis, the amplitude is the...
    350 Words | 1 Page
  • Ojt Term Paper - 1911 Words
    Urdaneta City University College of engineering and architecture BASIC CONCEPT OF ELECTRICAL ENGINEERING SYSTEM Bryan M. Legaspi Bsee – V Eng’r. Dennis M. Pascua Instructor Electrical system design is the design of electrical systems. This can be as simple as a flashlight connected through two wires to a light bulb or as involved as the space shuttle. Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with...
    1,911 Words | 7 Pages
  • Boq of a Retail Store - 4038 Words
    INTERART FINAL BILL - 500 sqft Annexure A- Civil & Electrical SR.NO. 1 1.1 ITEM CIVIL WORK Doors P / F Glass Door - 1000x2100, 12mm thk. Toughened glass (Trutuf / Gurind) door with patch fittings , door spring ( DORMA) comprising of locking arrangement and SS handles 900mm long, 25 mm dia. Of Dorset make, including mirror edge polishing etc com P / F Flush Door - 750x2100, 35mm thk. flush door, of make Kitply/Greenply or equivalent, with Merino Vertiline 21065 & 21069 laminates on both sides...
    4,038 Words | 19 Pages
  • swag - 621 Words
    Dom ------------------------------------------------------ Jan.19 1. What is a computer network? A computer network consits of a number of computers linked together using special ha`rdware and software to enable them to share computing resources. 2. List four main hardware and three software components on a network. 1. Hardware -Personal computers, mainframes, printers, and navigational control systems. 2. Software - Application software, desktop software, and networking...
    621 Words | 3 Pages
  • Unit 3 Exercise 1
    1. Application (in terms of cabling infrastructure) – A system the transmission method of which is supported by telecommunications cabling, such as a 100base-TX Ethernet, or digital voice. 2. Unshielded Twisted-Pair – (UTP) a pair of copper wires twisted together with no electromagnetic shielding around them. Each wire pair is twisted many times per foot to cancel out electrical signal. 3. Shielded Twisted-Pair – A type of twisted pair cable in which the pairs are enclosed in an outer...
    483 Words | 2 Pages
  • unit 4 - 426 Words
    Unit 4 Assignment 1 Copper vs. Fiber Paper Copper wire is found in most household electric or electrical related devices. One advantage of copper wire is its conductivity. Copper wire is second only to silver wire in level of conductivity meaning it will accept a current more so than almost any other type of wire. Copper wire is also heat resistant and can handle high levels of charge without many issues with overloading the wire. Copper in itself is also resistant to corrosion. This...
    426 Words | 2 Pages


All Cable Essays