all three solids precipitated at the bottom was heated‚ which allowed the PbCl2 to dissolve. The supernatant fluid containing the Pb(II) ions was then separated from the solid mercury(I) ions and solid silver ions decanting‚ adding a drop of acetic acid to the supernatant fluid‚ and also adding two drops of K2CrO4 to the test tube. A milky yellow mixture was observed as this indicated the presence of the lead (II) ion. This insoluble yellow precipitate was the insoluble compound of PbCrO4. In part
Free Solubility Solid Precipitation
The Virtual Lab – ELISA Test Lab: Immunology 09/04/2013 Instructors: Dr. Charlie Wilson Written by: Dipen Patel I. Objective: The purpose of the lab was to learn the procedure of performing an ELISA test to determine whether a particular antibody is present in a patient’s blood sample. ELISA is an abbreviation for “Enzyme-linked Immunosorbent Assay." II. Introduction: The interaction of antigen and antibody outside the body can be used to determine if patient
Premium Antibody Immune system ELISA
Name: Danielle Title: Unknown Lab Report Introduction: There are many reasons for identifying an unknown bacterium. The reasons range from medical purposes‚ such as determining if the unknown could cause ailments in living things or knowing what microorganisms are needed to make antibiotics. The experiment was done by applying methods in order to identify an unknown bacterium. An unknown bacterium was handed out by Dr. Honer. The appropriate tests were prepared and applied. The
Premium Bacteria Escherichia coli Microbiology
STANDARDISATION OF HYDROCHLORIC ACID REPORT Aim: To standardize an unknown solution of hydrochloric acid Method: See INSTRUCTIONS for practical 6.2 & 6.3 Results: Attempt No. | Titre (mL) | | 1 | 20.9 | Rough Titration | 2 | 20.5 | | 3 | 20.7 | Concordant Titres | 4 | 20.7 | | 5 | 20.7 | | (1) Tabled Results (2) Concordant Titrations Results 20.7 mL | 20.7 mL | 20.7 mL | Average of Concordant: (20.7 + 20.7 +20.7) 3= 20.7 mL Calculations:
Premium Chlorine Measurement Mole
McLean 1 Creating Acetylene Gas Introduction The purpose of the lab was to determine the ratio of air to acetylene results in complete combustion of acetylene gas. The balanced chemical equation for this experiment was C2H2(g) + O2(g) --> CO2(g)+ H2O(l). Complete combustion is the reaction of an element or compound with oxygen to produce the most common oxides and energy. Complete combustion occurs when the fuel and oxygen combine in exact proportions to completely burn the fuel
Premium Oxygen Combustion
Experiment 3: ANALYSIS OF UNKNOWN ACID SAMPLE USING TITRATION METHOD Date of Experiment: 4 September 2012 Introduction An acid-base titration is a procedure used in quantitative chemical analysis to determine the concentration of either an acid or a base. Titration is the slow addition of an acid (or a base) of known concentration from a burette (a narrow graduated cylinder) to a base (or an acid) of unknown concentration fin an Erlenmeyer
Premium Titration Sodium hydroxide
Introduction In the amylase lab‚ it was being tested if amylase‚ an enzyme found in saliva‚ would be denatured by being put in an acid or high temperatures. This lab is about denaturing amylase. It is tested by exposing it to pH and temperature changes. It is then mixed with Benedict’s solution‚ is a solution that changes color from blue to reddish brown when maltose is present. Amylase breaks starch into maltose‚ so is the amylase isn’t denatured‚ it should change colors. Amylase is an enzyme
Premium Enzyme Starch Amylase
One of the main learning experiences of this lab is to learn the importance of calibrating a sensor. In most cases‚ a sensor will not have an output that is exactly what you need. An example of this is a strain gage. A stain gage gives back a voltage‚ but with that given voltage a distance can be found. Introduction: In this experiment‚ the QNET-MECHKIT was used. This board has multiple compact sensors that can be used for experiments. For this lab we will be using the strain gage to find the
Premium Metrology Measurement Angle
I.Purpose The purpose of this lab is to show how potential energy and kinetic energy is shown and transferred using a model rollercoaster. This lab also demonstrates the Law of Conservation of Energy. II.Introduction Potential and Kinetic energy have a very big relationship. The Law of Conservation of Energy states that “Energy cannot be destroyed or created‚ but can be transformed or transferred.” This lab will help demonstrate this law and show the conversion between Kinetic and Potential
Free Energy Potential energy Conservation of energy
Ashley Spees CHM 261- Batzer Chem Final Write Up- Kool Aid Lab Total Acid This part of the lab requires titration of Kool Aid with an NaOH solution. The reason titrations are used is to determine the concentration of an unknown solution by reacting a strong acid with a strong base. Titrations are hard to accomplish‚ though‚ due to the fact that indicators used to show the endpoints are very sensitive and one drop could make the solution titrate past its endpoint. Blue stock solution: 3 mg/L
Premium Sodium hydroxide Base Titration