t c LE
Dassault Systèmes SolidWorks Corporation
175 Wyman Street
Waltham, MA 02451 U.S.A.
In the event that you receive a request from any agency of the U.S. government to provide Software with rights beyond
those set forth above, you will notify DS SolidWorks of the
scope of the request and DS SolidWorks will have five (5)
business days to, in its sole discretion, accept or reject such request. Contractor/Manufacturer: Dassault Systèmes
SolidWorks Corporation, 175 Wyman Street, Waltham,
Massachusetts 02451 US.
t c LE
© 1995-2011, Dassault Systèmes SolidWorks Corporation, a
Dassault Systèmes S.A. company, 175 Wyman Street,
Waltham, MA 02451 USA. All rights reserved.
The information and the software discussed in this document
are subject to change without notice and are not
commitments by Dassault Systèmes SolidWorks Corporation
No material may be reproduced or transmitted in any form or
by any means, electronically or manually, for any purpose
without the express written permission of DS SolidWorks.
The software discussed in this document is furnished under a license and may be used or copied only in accordance with
the terms of the license. All warranties given by DS
SolidWorks as to the software and documentation are set
forth in the license agreement, and nothing stated in, or
implied by, this document or its contents shall be considered or deemed a modification or amendment of any terms,
including warranties, in the license agreement.
SolidWorks® 3D mechanical CAD software is protected by
U.S. Patents 5,815,154; 6,219,049; 6,219,055; 6,611,725;
6,844,877; 6,898,560; 6,906,712; 7,079,990; 7,477,262;
7,558,705; 7,571,079; 7,590,497; 7,643,027; 7,672,822;
7,688,318; 7,694,238; 7,853,940 and foreign patents, (e.g.,
EP 1,116,190 and JP 3,517,643).
eDrawings® software is protected by U.S. Patent 7,184,044;
U.S. Patent 7,502,027; and Canadian Patent 2,318,706.
U.S. and foreign patents pending.
Trademarks and Product Names for SolidWorks
Products and Services
SolidWorks, 3D PartStream.NET, 3D ContentCentral,
eDrawings, and the eDrawings logo are registered
trademarks and FeatureManager is a jointly owned registered
trademark of DS SolidWorks.
CircuitWorks, FloXpress, TolAnalyst, and XchangeWorks
are trademarks of DS SolidWorks.
FeatureWorks is a registered trademark of Geometric Ltd.
SolidWorks 2012, SolidWorks Enterprise PDM, SolidWorks
Workgroup PDM, SolidWorks Simulation, SolidWorks Flow
Simulation, eDrawings Professional, and SolidWorks
Sustainability are product names of DS SolidWorks.
Other brand or product names are trademarks or registered
trademarks of their respective holders.
COMMERCIAL COMPUTER SOFTWARE —
The Software is a “commercial item” as that term is defined at 48 C.F.R. 2.101 (OCT 1995), consisting of “commercial
computer software” and “commercial software
documentation” as such terms are used in 48 C.F.R. 12.212
(SEPT 1995) and is provided to the U.S. Government (a) for
acquisition by or on behalf of civilian agencies, consistent with the policy set forth in 48 C.F.R. 12.212; or (b) for
acquisition by or on behalf of units 3 of the department of
Defense, consistent with the policies set forth in 48 C.F.R. 227.7202-1 (JUN 1995) and 227.7202-4 (JUN 1995).
Document Number: PMT1200-ENG
Copyright Notices for SolidWorks Standard,
Premium, Professional, and Education Products
Portions of this software © 1986-2011 Siemens Product
Lifecycle Management Software Inc. All rights reserved.
Portions of this software © 1986-2011 Siemens Industry
Software Limited. All rights reserved.
Portions of this software © 1998-2011 Geometric Ltd.
Portions of this software © 1996-2011 Microsoft
Corporation. All rights reserved....