Si4010 K EY F O B D EVELOPMENT K IT U SER ’ S G UIDE
1. Key Fob Development Platform
The Si4010 key fob development platform is a flexible platform for comfortably developing software and testing the whole system using the Silicon Laboratories software development IDE. The platform also allows programming of the NVM on chip. The kit has two versions: one for the 434 MHz band (P/N 4010-DKKF_434) and one for the 868 MHz band (P/N 4010-DKKF_868).
1.1. Kit Content
Table 1. Kit Content
Qty Part Number 4010-DKKF_434 2 1 1 1 1 1 1 1 1 1 2 1 2 1 5 1 1 1 1 1 1 1 2 1 4010-UBPB_434 MSC-DKPE1 Si4010-C2-GS 4010-DKPB434-BM 4313-DAPB_LB MSC-PLPB_1 MSC-BA5 MSC-BA4 EC3 MSC-DKCS5 CRD2032 MSC-DKSW1 4010-DKKF_868 4010-UBPB_868 MSC-DKPE1 Si4010-C2-GS 4010-DKPB868-BM 4313-DAPB_HB MSC-PLPB_2 MSC-BA5 MSC-BA4 EC3 MSC-DKCS5 CRD2032 MSC-DKSW1 Description Si4010 Key Fob Development Kit 434 MHz Si4010 key fob demo board 434 MHz w/o IC SOIC/MSOP socketed development board Si4010-C2-GS transmitter IC, SOIC Package Si4010 MSOP key fob development board 434 MHz, SMA Si4313 LED receiver board low band pcb ant Key Fob Plastic Case (translucent grey) Programming interface board Burning adapter board USB Debug Adapter USB Cable CR2032 3 V coin battery Wireless Development Suite disc Si4010 Key Fob Development Kit 868 MHz Si4010 key fob demo board 868 MHz w/o IC SOIC/MSOP socketed development board Si4010-C2-GS transmitter IC, SOIC Package Si4010 MSOP key fob development board 868 MHz, SMA Si4313 LED receiver board high band pcb ant Key Fob Plastic Case (translucent red) Programming interface board Burning adapter board USB Debug Adapter USB Cable CR2032 3 V coin battery Wireless Development Suite disc
Rev. 0.2 4/11
Copyright © 2011 by Silicon Laboratories
1.1.1. Burning Adapter (P/N MSC-BA4) The programming interface board serves as an interface in between the debug adapter and the Socketed Key Fob Development Board or the Development Key Fob. It provides 6.5 V for NVM programming. The power source is activated by a sliding switch on the board. It is required when the user wants to program the internal NVM memory on the chip. The programming interface board contains an 8-pin header, to which GPIO0 to GPIO5, along with power and ground, are connected from the socketed or battery platform. Therefore, the user can tap to that header to control or monitor the chip pins.
1.1.2. Si4010 Socketed Key Fob Development Board (P/N MSC-DKPE1) Socketed (both SOIC and MSOP) key fob board with SMA connector.
1.1.3. Si4010 MSOP Key Fob Development Board 434 MHz, SMA (P/N 4010-DKPB434-BM) This development board has an unburned soldered Si4010, five push buttons, SMA RF output, battery clip, and battery switch. This board allows running user application from RAM during program development even while board is disconnected and powered by the battery. The SMA output connector allows wired measurements of the RF output signal.
1.1.4. Si4313 LED Receiver Board Low Band PCB Ant (P/N 4313-DAPB_LB) Receiver board for link testing with the key fob development board loaded with the rke_demo example program.
1.1.5. Programming Interface Board (P/N MSC-BA5) Adapter board for interfacing customer PCB to the debug adapter.
1.1.6. 4010 Key Fob Demo Board 434 MHz without IC (P/N 4010-UBPB_434)
1.1.7. Key Fob Plastic Case (translucent grey) (P/N MSC-PLPB_1)
1.1.8. Wireless Development Suite Disc (P/N MSC-DKSW1) Wireless Development Suite CD including Si4010 documentation kit, NVM burning application, example projects, and header files. 1.1.9. Si4010 sample, SOIC package (P/N Si4010-C2-GS)
1.1.10. USB Cable (P/N MSC-DKCS5) Cable to connect EC3 Debug Adapter to PC. 1.1.11. EC3 Debug Adapter (P/N EC3) Silicon Labs debugging adapter, used by other Silicon Labs’ MCU products as well, compatible with the development platform.
Please join StudyMode to read the full document