Suzuki Gsxr

2001-2003 Suzuki GSXR600
Installation Instructions
Button Adjustment Display Parts List Power Commander USB Cable CD-ROM Installation Guide Power Adapter Power Commander Decals Dynojet Decals Velcro® Strip Faceplate Buttons Alcohol Swab Expansion Port USB Port

1 1 1 1 1 2 2 1 1

The ignition MUST be turned OFF before installation!
You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 [phone] www.powercommander.com i307-411 2001-2003 Suzuki GSXR600 - PCIII USB - 1

1
Unplug this connector

Remove the main seat and the passenger seat. Hold the front of the fuel tank up using the prop rod located in the trunk area. Locate the connector from the main wiring harness to the injector rail and uplug this connector (Fig. A).

2

Fig. A

3

NOTE: This connector is black in color. 4 Plug the connectors from the PCIII in-line of the stock wiring harness (Fig. B).

Stock connector

Fig. B

PCIII connector

View from LH side

5

Route the PCIII wiring along the inside of the frame towards the battery. Attach the ground wire from the PCIII to the negative side of the battery (Fig. C).

6
Fig. C

Ground wire from PCIII

i307-411

www.powercommander.com

2001-2003 Suzuki GSXR600 - PCIII USB - 2

7

Install the PCIII in the rear section of the trunk using the supplied velcro (Fig. D). Make sure to clean both surfaces with alcohol first.

i307-411

Fig. D

www.powercommander.com

2001-2003 Suzuki GSXR600 - PCIII USB - 3