Sole E35 Elliptical Trainer Installation Guide

Only available on StudyMode
  • Topic: Screw, Heart rate, Henry F. Phillips
  • Pages : 28 (8641 words )
  • Download(s) : 374
  • Published : December 27, 2011
Open Document
Text Preview
Z100 / Z300



Installation Guide

For More Information on Sole E35 Elliptical trainer:


Important Electrical Information
NEVER remove any cover without first disconnecting AC power supply. If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other environment that may cause the machine to get wet. The maximum operating temperature specification is 40 degrees C (104 F), and humidity is 95% non-condensing (no water drops forming on surfaces).

Grounding Instructions E35 only
This product must be grounded. If the E35 s electrical system should malfunction or breakdown grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician. This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. Grounded Outlet Adapter

Metal Screw

Tab of Grounding Screw

Grounding Pin

Grounded Outlet Box


For More Information on Sole E35 Elliptical trainer:


Important Operation Instructions
NEVER operate this elliptical without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in resistance do not occur immediately. Set your desired level on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your elliptical during an electrical storm. Surges may occur in your household power supply due to lightening strikes that could damage elliptical components. Unplug the elliptical during an electrical storm as a precaution. Use caution while participating in other activities while using your elliptical such as watching television, reading, etc. These distractions may cause you to lose balance which may result in serious injury. Always hold on to a handrail or hand bar while making control changes. Do not use excessive pressure on console control keys. They are precision set to properly function with little finger pressure. If you feel the buttons are not functioning properly with normal pressure, contact your SOLE dealer.


The elliptical is equipped with two transport wheels which are engaged when rear of the Elliptical is lifted.

For More Information on Sole...
tracking img