The main aim of this project will be to design a SMS driven automatic display board which can replace the currently used programmable electronic display. It is proposed to design receiver cum display board which can be programmed from an authorized mobile phone. The message to be displayed is sent through a SMS from an authorized transmitter. The microcontroller receives the SMS, validates the sending Mobile Identification Number (MIN) and displays the desired information. Started off as an instantaneous News display unit, we have improved upon it and tried to take advantage of the computing capabilities of microcontroller. Looking into current trend of information transfer in the campus, it is seen that important notice take time to be displayed in the notice boards. This latency is not expected in most of the cases and must be avoided. It is proposed to implement this project at the institute level. It is proposed to place display boards in major access points. The electronics displays which are currently used are programmable displays which need to be reprogrammed each time. This makes it inefficient for immediate information transfer, and thus the display board loses its importance. The GSM based display board can be used as an add-on to these display boards and make it truly wireless. The display board programs itself with the help of the incoming SMS with proper validation. Such a system proves to be helpful for immediate information transfer. The system required for the purpose is nothing but a Microcontroller based SMS box. The main components of the kit include microcontroller, GSM modem. These components are integrated with the display board and thus incorporate the wireless features. The GSM modem receives the SMS. The AT commands are serially transferred to the modem through Rx-Tx connection. In return the modem transmits the stored message...