Significance

Only available on StudyMode
  • Download(s) : 68
  • Published : February 19, 2013
Open Document
Text Preview
whatever

5.7.1: Packet Tracer Skills Integration Challenge
Topology Diagram

All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 6

CCNA Exploration
Routing Protocols and Concepts: RIP version 1

5.7.1: Packet Tracer Skills Integration Challenge

Addressing Table for R1
Device

Interface

IP Address

Subnet Mask

209.165.201.2

255.255.255.252

S0/0/0

209.165.201.1

255.255.255.252

S0/0/1

209.165.201.5

255.255.255.252

Fa0/0

209.165.200.225

255.255.255.252

NIC

209.165.200.226

255.255.255.252

S0/0/0
R1

S0/0/1
S0/1/0
S0/1/1
Fa0/0
Fa0/1

B1-R1

Fa1/0
Fa1/1
S0/0/0
Fa0/0
Fa0/1

B2-R1

Fa1/0
Fa1/1
S0/0/0
Fa0/0
Fa0/1

B3-R1

Fa1/0
Fa1/1
S0/0/0

ISP-R1

Web Server 1

All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 2 of 6

CCNA Exploration
Routing Protocols and Concepts: RIP version 1

5.7.1: Packet Tracer Skills Integration challenge Activity

Addressing Table for R2
Device

Interface

IP Address

Subnet Mask

209.165.201.10

255.255.255.252

S0/0/0

209.165.201.6

255.255.255.252

S0/0/1

209.165.201.9

255.255.255.252

Fa0/0

209.165.200.229

255.255.255.252

NIC

209.165.200.230

255.255.255.252

S0/0/0
R2

S0/0/1
S0/1/0
S0/1/1
Fa0/0
Fa0/1

B1-R2

Fa1/0
Fa1/1
S0/0/0
Fa0/0
Fa0/1

B2-R2

Fa1/0
Fa1/1
S0/0/0
Fa0/0
Fa0/1

B3-R2

Fa1/0
Fa1/1
S0/0/0

ISP-R2

Web Server 2

Introduction:
This activity focuses on subnetting skills, basic device configurations, static routing and RIP routing. Once you have configured all devices, you will test for end-to-end connectivity and examine your configuration.

Objectives
Design and document an addressing scheme based on requirements. Apply a basic configuration to the devices.
Configure static routing between ISP routers.
Configure RIPv1 routing in Region 1 and Region 2.
Disable RIP updates on appropriate interfaces.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

CCNA Exploration
Routing Protocols and Concepts: RIP version 1

5.7.1: Packet Tracer Skills Integration challenge Activity

Configure default routes and redistribute through RIP.
Verify full connectivity between all devices in the topology.

Task 1: Design and document an addressing scheme.
Step 1: Design an addressing scheme.
Using the topology and the following requirements, design an addressing scheme: The WAN links between R1 and R2 and their respective ISP routers are already configured. Also, the links between the ISPs and the Web Servers are already configured. Since RIPv1 is a classful routing protocol, you cannot implement Va riable Length Subnet Masks (VLSM). Subnet each region’s address space using the following guidelines:  The largest subnet in Region 1’s address space is 1,000 hosts. What is the subnet mask you should use for the 10.1.0.0/16 address space? _________________ _________  The largest subnet in Region 2’s address space is 500 hosts. What is the subnet mask you should use for the 172.20.0.0/16 address space? __________________________ For the LANs in Region 1, assign subnet 0 to the LAN attached to FastEthernet 0/0 on B1-R1. Continue to assign LANs in sequence. Subnet 1 is assigned to the LAN attached to FastEthernet 0/1 on B1-R1; Subnet 2 to FastEthernet 1/0; Subnet 3 to FastEthernet 1/1 and so on. For the WANs in Region 1, assign the last subnet to the link betwee n R1 and B3-R1, the second to last subnet to the link between R1 and B2-R1 and the third to the last subnet to link between R1 and B1-R1.

Record the Region 1 subnet assignments in the following table: Router

Subnet
Number

B1-R1 Fa0/0

0

B1-R1 Fa0/1

1

B1-R1 Fa1/0

2

B1-R1 Fa1/1

3

B2-R1...
tracking img