#04-07-30-024E: No Movement in Drive or Reverse
with or without DTC P0741, P0742, P0841, P1756,
P1758 or P1882 (Replace case Cover Assembly and
Filter) - (Jun 9, 2006)
This bulletin is being revised to add additional Correction information. Please discard Corporate Bulletin Number 04-07-30-024D (Section 07 - Transmission/Transaxle). Condition
Some customers may comment on the vehicle not moving in the "D" (Drive) or "R" (Reverse) gear selection positions. In many cases, the transaxle will also produce an audible grind or whine noise when attempting to operate in drive or reverse. The Service Engine Soon (SES) telltale may be illuminated with DTCs P0741, P0742, P0841, P1756, P1758, or P1882 set. Cause
This condition may occur when the VT25E transaxle belt has malfunctioned. Correction
1. Disassemble and clean debris from the transaxle.
Subject: No Movement in Drive or Reverse with or without DTC P0741, P0742, P0841, P1756, P1758, or P1882 (Replace Case Cover
Assembly and Filter)
Models: 2002 Saturn VUE - Retrofitted with a 2003 or 2004 VT25E (VTi) Transaxle (RPO M16/M75)
2003-2004 Saturn ION
2003-2005 Saturn VUE
with VT25E (VTi) Transaxle (RPO M16/M75)
© 2008 General Motors Corporation. All rights reserved.
Document ID: 1837052 Page 1 of 3
http://gsi.xw.gm.com/si/showDoc.do?docSyskey=1837052&from=bs 2/29/2008 2. Inspect the front differential transfer gear, drive pinion gear and the front differential carrier ring gear for excessive wear or damage.
3. Inspect the bearing assemblies on the front differential transfer gear for damage or wear. If a bearing assembly needs replacement, refer to Front Differential Transfer Gear Bearing and Cup Replacement in SI.
4. Inspect the drive pinion bearing cup on the transmission case assembly for damage or wear. If the bearing cup needs replacement, refer to Front Differential Transfer Gear Bearing and Cup Replacement in SI.
5. Inspect the drive pinion gear bearing cup on the torque converter and differential...
Please join StudyMode to read the full document