As all popular electronics textbooks will verify, any passive circuit can be created with a combination of just three standard components: a resistor, which opposes charge flow; an inductor, which opposes any change in the flow of charge; and a capacitor, which stores charge. But, if research by physicists in the US is anything to go by, the textbooks may have to be appended with a fourth standard component: a “memristor”. In simple terms, a memristor “remembers” the amount of charge that has flowed through it and as a result changes its resistance. The effect was predicted in 1971 by electronics engineer Leon Chua, but the only clues that it actually exists have been in the reports of strange “hysterisis” loops in the current–voltage relationships of thin-film devices. This means that when the voltage increases the current follows a different relationship to when the voltage decreases. Memristance will herald a paradigm shift not only in engineering, but also in the sciencesLeon Chua, University of California at Berkeley “[Scientists] essentially reported this behaviour as a curiosity or a mystery with some attempt at a physical explanation for the observation,” says Stanley Williams of Hewlett Packard Labs in Palo Alto, California. “No-one connected what they were seeing to memrisistance.” Now, Williams and colleagues from Hewlett Packard have made the first memristors. Model behaviour
To make their memristors, Williams’s team first considered how memristance might originate at the atomic level. They came up with an analytical model of a memristor that consists of a thin piece semiconductor containing two different regions: a highly doped region, which has a low resistance, and a zero-doped region, which has a high resistance. When a voltage is applied across the semiconductor, it causes some of the dopants to drift so that the combined resistance changes, thereby producing the characteristic hysterisis effect of memristance. To put this model into practice,...
Please join StudyMode to read the full document