Install the KORG USB-MIDI Driver before launching the editor software. The KORG USB-MIDI Driver can be found on the included CD-ROM; you can also download it from the website listed below. Please read the “operation guide” for details on how to install it. The updater will be posted on our website, so please check back with us at http://www.korg.com/
• Preload data file
If you purchased the M50-61/73, please use the data file PRELOAD.M50all. If you purchased the M50-88, please use the data file PRELOAD88.M50all.
• Additions and changes from v1.0.1 to v1.0.2
-Support for the M50-73
The information of the M50-73 was added to this ReadMe. The editor itself is identical with the previous version.
• Additions and changes from v1.0.0 to v1.0.1
-Preload data file
Preload data file is also installed when you install the M50 Editor.
-If you make settings in your host application so that the M50's MIDI IN port (M50 KEYBOARD) is used as the MIDI input of the host application, there will be a greater possibility of errors occurring while receiving or transmitting a MIDI data dump with the UTILITY menu Receive/Transmit command, or while executing a MIDI data dump that occurs when you load a data file. In such cases, we recommend that you either set your host application so that it does not use the M50's port as its MIDI input, or switch the setting only when you're performing a data dump so that the M50's port is not used during that time. -The M50 Editor/Plug-In Editor doesn't notice the modifications of some operations using the M50 hardware. Please execute “Receive All” from the UTILITY menu of the M50 Editor/Plug-In Editor to load the whole data from the M50 after these operations.
- Load a data file in the MEDIA mode
- Press COMPARE key or WRITE key
- Following MENU commands;
Change all bank references
Copy Drum Kit
Copy Drum Track
Copy From Song
Copy From Combi