Change in Pressure and Different Depths in a Static Fluid Lab

Only available on StudyMode
  • Download(s) : 100
  • Published : February 24, 2013
Open Document
Text Preview
Change in Pressure and Different Depths in a Static Fluid Lab

Marcus Uchaker
MET: 2050
January 26, 2012

Purpose:
The purpose of this lab is to devise a correlation between that of the data we have collected from our experiment and compare it to that of theory. In this experiment 3 different tests were done in order to test this theory. The first test was to tie a balloon on the end of a manometer and measure the pressure at different depths in a large beaker filled with water. The next test was the same thing, but without the balloon on the end of the manometer. For the final test a pressure gauge was used to measure the pressure at different depths in the water. The data collected from each experiment was the depth of the object and its deflection. To find out the theoretical pressure for the experiment this equation will be used: ∆P=γH2O÷Depth

The theoretical results will then be compared to the measured results, determining the correlation between both sets of data in order to prove whether or not this experiment is capable of proving the theory.

Procedure:
1) Fill the cylinder with water and adjust the manometer to read zero. 2) For first test tie a balloon to the end of the tube that gives the manometer reading, and fill it with air. 3)Immerse the balloon in the water and measure the deflection at each specific depth (Try to get as close as you can to: 11, 9, 7, 5, 3, and 0 inches). 4)When finished with the first test remove the balloon and proceed to second test. 5) For the second test immerse the (balloon free) manometer tube in water, also measuring each specific depth and deflection. 6) For the third test instead of measuring with the manometer use a pressure gauge to measure your deflection (make sure you set the gauge to zero before testing).

Calculations:
Test #1 Example
Depth: 3.5 inches
Deflection: 1.7 inches
P. Theory: γH2O×3.512=18.2lbft2
P. Measured: 1.712×γManometer×γH2O=16.9lbft2

Test #2 Example...
tracking img