01 Selection MML Tiles Faq01
Guide in Selecting MML Tiles
MML Ceramic Tiles are designed to emulate natural stones. Each tile is fashioned to exhibit unique veining and colour distribution. Therefore, a piece of ceramic tile does not totally represent its whole range.
It is always a good practice to view several pieces of tiles at standing distance of at least one (1) meter away to have a realistic representation of a particular product.
Ceramic tile are made from elements of the earth; clay, sand and minerals. Just as these materials vary in their natural form, the end result after mixing, processing and kiln firing will also produce variations in colour and size of the tiles within a batch, and more so from batch to batch. For this very reason, technical specifications, including the co-efficient of friction, may exhibit slight variations from tile to tile and even from test to test. Test results disclosed in this brochure are typical but not guarantees of minimum or maximum thresholds of performances.
Not all tiles are made equal. MML offers a wide range of sizes, colours, surface finishes and ceramic body strength. There is always a product to suit your particular need or requirement.
• For outdoors and/or areas susceptible to wetness; we advice using any of the textured surface products such as the
Rustik, or MMGR or RFG collections.
• If slip resistance is a priority, note that the slip resistant characteristics on the tile surface will trap dirt and will be
difficult to clean. Therefore a scrubbing & an intensive cleaning regime must be instituted to keep the surface clean.(we might want to avoid recommending Natural (S) tiles for outdoor/external wet areas because our Natural tiles only have a
R9 slip resistance rating)
• A polished tiles surface is a result of a mechanical grinding and calibration process on a fired tile. Therefore:
• The dimension of polished tiles will always be slightly smaller than other surface finishes of the same nominal sizes. or When the installation
MML Ceramic Tiles are designed to emulate natural stones. Each tile is fashioned to exhibit unique veining and colour distribution. Therefore, a piece of ceramic tile does not totally represent its whole range.
It is always a good practice to view several pieces of tiles at standing distance of at least one (1) meter away to have a realistic representation of a particular product.
Ceramic tile are made from elements of the earth; clay, sand and minerals. Just as these materials vary in their natural form, the end result after mixing, processing and kiln firing will also produce variations in colour and size of the tiles within a batch, and more so from batch to batch. For this very reason, technical specifications, including the co-efficient of friction, may exhibit slight variations from tile to tile and even from test to test. Test results disclosed in this brochure are typical but not guarantees of minimum or maximum thresholds of performances.
Not all tiles are made equal. MML offers a wide range of sizes, colours, surface finishes and ceramic body strength. There is always a product to suit your particular need or requirement.
• For outdoors and/or areas susceptible to wetness; we advice using any of the textured surface products such as the
Rustik, or MMGR or RFG collections.
• If slip resistance is a priority, note that the slip resistant characteristics on the tile surface will trap dirt and will be
difficult to clean. Therefore a scrubbing & an intensive cleaning regime must be instituted to keep the surface clean.(we might want to avoid recommending Natural (S) tiles for outdoor/external wet areas because our Natural tiles only have a
R9 slip resistance rating)
• A polished tiles surface is a result of a mechanical grinding and calibration process on a fired tile. Therefore:
• The dimension of polished tiles will always be slightly smaller than other surface finishes of the same nominal sizes. or When the installation